Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
Chargers are often designed for a particular type of rechargeable battery unit. There is the danger of fire if other types of rechargeable battery units are used. b) Only the rechargeable battery units supplied are to be used with an electrical power tool. The use of other rechargeable battery units may lead to the danger of injury or fire. c) When they are not being used, store rechargeable battery units away from paperclips, coins, keys. nails, screws or other small metal objects that could cause the contacts to be bridged. Short-circuiting the contacts of a rechargeable battery unit may result in heat damage or fire. d) Fluids may leak out of rechargeable battery units if they are misused. If this happens, avoid contact with the fluid. If contact occurs, flush the affected area with water. Seek additional medical help if any of the fluid gets into your eyes. Escaping battery fluid may cause skin irritation or burns. A Safety advice relating to cordless drill drivers ■ Securely support the workpiece. A workpiece held in a clamp or vice is kept more securely in place than one held by your hand. ■ Hold the electrical power tool firmly. High reaction torques may occur momentarily during tightening or loosening of screws. ■ If the inserted tool jams, switch off the electrical power tool immediately. Be prepared for high reaction torques as they may cause kickback. HWARNjN ¡0! The inserts tool may strike concealed electricity cables, therefore when working you must hold the electrical power tool by the insulated handle areas only. Contact with a live wire means that the metal parts of the electrical power tools may become live and this can result in an electric shock. ■ Before you carry out any tasks on the device, transport or store it, make sure that the direction of rotation III PARKSIDE GB/IE 9 General safety advice for ... / Before first use / Preparing the tool for use switch is in the middle position (lock). To prevent the device from starting up unintentionally. • Original ancillaries / accessories ■ Use only the ancillaries and accessories that are detailed in the operating instructions. The use of ancillaries and accessories other than those recommended in the operating instructions could lead to an increased risk of personal injury for you. • Before first use • Charging the rechargeable battery on the device (see Fig. D) Note: The battery is supplied partially charged. Charge the battery for at least three hours before first use. You can charge the Li-Ion battery at any time without risk of shortening battery life. Interrupting the charging process does not damage the battery. Starting the charging process: □ Connect the mains adapter Q0] to a 230-240V~ 50 Hz mains socket. □ Connect the mains adapter [10I to the charging socket on the device [5. The rechargeable battery is charged when the battery indicator [3 changes from red to green. Ending the charging process: □ Disconnect the mains adapter Q0] from the mains socket. □ Disconnect the mains adapter Q0] from the charging socket on the device [5. • Changing the bits / screwdriver bit inserts Insertion: □ Insert the bit directly into the tool holder |~9|. Removal: □ Pull out the bit out of the tool holder [9]. • Preparing the tool for use • Switching on / off the cordless screwdriver Switching on: □ To start the appliance squeeze on the ON / OFF switch [7] and then keep it pressed down. Switching off: □ To stop the appliance, release the ON / OFF switch [7]. • Changing the direction of rotation Clockwise: □ Slide the direction of rotation switch [T] to the left. □ Press the ON / OFF switch |~7|. The direction indicator (clockwise) [2 illuminates. You can now screw in the screws. Anticlockwise: □ Slide the direction of rotation switch |T] to the right. □ Press the ON / OFF switch |~7|. The direction indicator (anticlockwise) [4] illuminates. You can now screw out the screws. Lock: □ Slide the direction of rotation switch |T] into the middle position. The ON / OFF switch [7] is now locked. • Switching on / off the LED lights [8] Switching on: □ Press the ON / OFF switch (LED lights) [6] and keep it pressed. 10 GB/IE III PARKSIDE Preparing the tool for use / Maintenance and cleaning / Service / Warranty Switching off: □ Release the ON / OFF switch (LED lights) [6]. • Tips and Tricks □ Screw bits are designated with their dimensions and their shape. If you are unsure, always try the particular screw bit out to see whether it sits in the screw head without any free play. • Maintenance and cleaning ■ g |WaRning!| danger of electric SHOCK! Pull the mains adapter Q0] out of the mains socket before carrying out any cleaning of the device. The cordless screwdriver is maintenance-free. □ Always keep the device clean, dry and free of oil or grease. □ Do not allow any liquids to enter the device. □ Use a cloth to clean the housing. Never use petrol, solvents or cleaning agents that might attack p...