Оценок - 2, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
9. and possible personal injury. Contact your local public utility companies (gas, water, electric, cable, etc.) prior to drilling in an unknown area. Drill with the Engine running at full speed. 10. Fully squeeze the Speed Control Lever and maintain a steady drilling speed. Keep the Auger clean and sharp.11. Keep all guards and safety devices in proper working order and properly 12. adjusted. Before starting the Engine, make sure the Auger is not contacting any ob13. ject. When shutting off the Engine, and make sure the Auger has stopped before 14. setting the tool down. CARBON MONOXIDE PRECAUTIONS This Auger Drill is designed for outdoor use only. Do not operate the Auger Drill in a closed area or in a poorly ventilated area. When running, the Engine of this product produces carbon monoxide, a colorless, odorless, toxic gas that, when inhaled, can cause serious personal injury or death. FIRE AND EXPLOSION PRECAUTIONS 1. Gasoline fuel and fumes are flammable, and potentially explosive. Use proper fuel storage and handling procedures. Have multiple ABC class fire extinguishers nearby. Keep the Auger Drill and surrounding areas clean at all times.2. When spills of fuel or oil occur, they must be cleaned up immediately. 3. Dispose of fluids and cleaning materials as per any local, state, or federal codes and regulations. Store oil rags in a covered metal container. Do not store fuel or other flammable materials near the Auger Drill.4. Do not smoke, or allow sparks, flames, or other sources of ignition around 5. the Auger Drill. Keep grounded conductive objects, such as tools, away from exposed, live 6. electrical parts and connections to avoid sparking or arcing. These events could ignite fumes or vapors. Do not refill the Fuel Tank while the Engine is running or while the Engine is 7. still hot. Do not operate the Auger Drill with known leaks in the fuel system. Use only Engine manufacturer recommended fuel and oil.8. MECHANICAL PRECAUTIONS Prior to performing service, maintenance, or cleaning procedures, allow the 1. Engine to completely cool. Then, remove the spark plug from the Engine. Do not alter or adjust any part of the Auger Drill or Engine that is assembled 2. and supplied by the manufacturer. Follow scheduled Auger Drill and Engine maintenance.3. CHEMICAL PRECAUTIONS Avoid contact with hot fuel, oil, exhaust fumes, and solid surfaces.1. Avoid body contact with fuels, oils, and lubricants used in the Auger Drill and 2. Engine. If swallowed, seek medical treatment immediately. Do not induce vomiting if fuel is swallowed. For skin contact, immediately wash with soap and water. For eye contact, immediately flush eyes with clean water. WARNING: This product contains or, when used, produces a chemical 3. known to the State of California to cause cancer and birth defects or other reproductive harm. (California Health & Safety Code § 25249.5, et seq.) NOTE: This item does not meet California CARB requirements and is not for sale or use in California. NOISE PRECAUTIONS Prolonged exposure to high noise levels is hazardous to hearing. Wear proper hearing protection when operating or working around the Auger Drill when it is running. REV 09b Additional PRECAUTIONS 1. DANGER! People with pacemakers should not use this tool. This tool produces strong electromagnetic fields that can cause pacemaker interference or pacemaker failure. People with pacemakers should consult their physician(s) for advice. 2. WARNING! The warnings and precautions discussed in this manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. UNPACKING When unpacking, check to make sure all the parts shown on the Parts Lists on pages 14, 16, and 18 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible. ASSEMBLY FIGURE AAUGER(33a) TRANSMISSION SHAFT(15a) PIN (34a)SAFETY PIN (35a) Insert the shank of the Auger (33a) fully upward into the Transmission Shaft (15a). Align the mounting holes in the Auger and Transmission Shaft. Then secure the Auger to the Auger Drill, using the Pin (34a) and Safety Pin (35a). (See Figure A.) PRE-START INSTRUCTIONS Fill the Fuel Tank IMPORTANT! 1. Your warranty is voided if you do not operate the Auger Drill with the proper 25:1 fuel mix in its Fuel Tank (89). Do not run the Engine with an improper fuel mix, low or no fuel mix. Running the Engine with an improper fuel mix, low or no fuel mix will permanently damage the unit. To obtain the proper 25:1 fuel mix, combine 25 parts unleaded gasoline (89+ octane) 2. with 1 part 2-cycle oil in the provided Fuel Mix Container (36a). Cover and shake to thoroughly mix before each fueling. NOTE: Mix only enough fuel for a few days work. The maximum storage time of mixed fuel is three months. GEARBOX (8a) O...