Оценок - 3, средний балл: 4.7
(
)
)
|
Фрагмент инструкции
1 SAFETY MESSAGES 1 A WARNING 1 Operator Instructions PersonalSafety Equipment Always Read Instructions Before Includes:1 YES 1 0 "sing Power Tools 1 Use -Safety Glasses Safety Rules Use -Safety Gloves @ Always Wear Safety Goggles ores seen Use Work Stations Use -Safety Boots @ Wear Hearing Protection Putting Into Service Use -Breathing Masks A T Avoid Prolonged Exposure o Vibration Operating Use -Ear Protectors YES Disrnantlina and Assernblv. Safety rules when using a 509215092L Impact Tool -Use only impact sockets and extensions, universal joints, etc., rated as being suitable for use with impact tools. -Prolonged exposure to vibration may cause injury. -Read all instructions before using this tool. All operators must be fully trained in its use andaware of thesesafety rules. -Do not exceed the maximum working air pressure. -Use personal protection equipment as recommended. -Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects and other reproductive harm. -Use compressed air only at the recommended conditions. -If the tool aooears to malfunction, remove from use immediately and arran e for service and repair. If it is not practical to remove tooTfrom service, then shut off the air supply to the tool and write or have written a warning note and attach it to the tool. -If tool is to be used with a balancer or other suspension device, ensure that the tool is firmly attached to the suspension/support device. -When operating the tool, always keep the body and particularly the hands away from the working attachment fixed to the tool. -The tool is not electrically insulated. Never use the tool if there is any chance of coming into contact with live electricity. -Always when usin the tool, adopt a firm footing and/or position and grip &e tool sufficiently only to overcome any reaction forces that may result from the tool doing work. Do not overgrip. -Use only correct spare parts for maintenance and repair. Do not improvise or make temporary repairs. Major servicing and repairs should only be carried out by persons trained to do so. -Do not lock, tape, wire, etc. the 'OnIOff' valve in 'On' position.The throttle triggerllever, etc.must always be free to return to the 'Off' ~osition when released. -Alwa s shut off the 'air supply to the tool and press the 'on/&' valve to exhaust the air from -It is expected that users will adopt safe working practices and observe all local, regional or country legal requirements when installing, using or maintaining the tool. -Take care that the exhaust air does not point towards any other person or material or substance that could be contaminated by oil droplets. When first lubricating a tool or if the tool exhaust has a high oil content, do not allow the exhaust air to come near very hot surfaces or flames. -Never lay the tool down until the working attachment has stopped moving. -When the tool is not in use, shut off th...
Эта инструкция также подходит к моделям:Дрели и шуропопверты - 5092L (500.2 kb)