Войти:
Оценок - , средний балл: ( )

Инструкция по эксплуатации InFocus, модель W 6V4

Производитель: InFocus
Размер: 1.41 mb
Название файла: c16c8021-42c9-4dd8-a590-5342adf8015e.pdf

Язык инструкции:en

Документ загружается, подождите пожалуйста
Документ загружается, подождите пожалуйста

Фрагмент инструкции


This will ensure that the safety of the power tool is maintained. PRECAUTION Keep children and infirm persons away. When not in use, tools should be stored out of reach of children and infirm persons. English SPECIFICATIONS Model W6VM W6V4 W6VA4 W6VB3 W8VB2 Voltage (by areas)* (110V, 115V, 120V, 127V, 220V, 230V, 240V) Power input 620 W No-load speed 0 – 6000/min 0 – 4500/min 0 – 3000/min 0 – 2600/min 0 – 1700/min Capacities 6 mm 8 mm Bit shank size 6.35 mm Hex. Weight (without cord) 1.4 kg 1.5 kg * Be sure to check the nameplate on product as it is subject to change by areas. STANDARD ACCESSORIES (1) No. 2 Plus bit .............................. 1(W6VM, W6V4, W6VA4) Standard accessories are subject to change without (2) Magnetic hex socket (H = 10 mm) ....... 1 (W6VB3, W8VB2) notice. OPTIONAL ACCESSORIES (sold separately) 1. For hex-head screws Hex-socket Sub-Stopper (B) Magnetic type Non magnetic type H = 6.35 mm H = 6.35 mm H 1/4 H = 7.94 mm H = 7.94 mm H 5/16 H = 9.53 mm H = 9.53 mm H 3/8H = 10 mm H = 10 mm 2. For other screws Screw head Bit type Bit holder Sub-Stopper No.1 No.2 No.3 Magnetic bit holder (Short type) Magnetic bit holder Non-magnetic bit bolder Sub-Stopper (G) Sub-Stopper (F) No.1 No.2 No.1 No.2 No.3 No.1 No.2 B Size 4 mm 5 mm 3. Plastic case APPLICATIONS . Tightening hex-head screws. . Tightening drywall screws, wood screws and self- drilling screws. Optional accessories are subject to change without notice. English PRIOR TO OPERATION 1. Power source Ensure that the power source to be utilized conforms to the power requirements specified on the product nameplate. 2. Power switch Ensure that the power switch is in the OFF position. If the plug is connected to a power receptacle while the power switch is in the ON position, the power tool will start operating immediately, which could cause a serious accident. 3. Extension cord When the work area is removed from the power source, use an extension cord of sufficient thickness and rated capacity. The extension cord should be kept as short as practicable. 4. Confirm the direction of bit rotation (Fig. 1) The bit rotates clockwise (viewed from the rear side) when the reversing switch lever is set to the “R” side position. When the lever is set to the “L” side position, the bit rotates counterclockwise and can be used to loosen and remove screws. 5. Adjusting the tightening depth (Fig. 2) The tightening depth can be adjusted by turning locator right and left click feeling. (1) For hex-head screws: Mount a hex-head screw on the hex-socket and set the distance between the sub-stopper end and the screw head neck to 1–1.5 mm, as shown in Fig. 3. (2) For drywall screws: Mount a drywall screw on the bit, and set the distance between the sub-stopper end and the screw head to 1.5–2 mm, as shown in Fig. 4. (3) For cross-recessed self-drilling screws: Mount a self-drilling screw on the bit, and set the distance between the sub-stopper end and the screw head bottom to 1–1.5 mm, as shown in Fig. 5. 6. Mounting the bit For details, refer to the item “Mounting and dismounting the bit”. MOUNTING AND DISMOUNTING THE HEXSOCKET OR THE BIT 1. Dismounting the hex-socket (Fig. 6) (1) While rotating the Sub-Stopper pull it out from the locator. (2) Remove the hex-socket, hold it with the opposite side of bit by hand or vise and pull out the bit with pliers. 2. Dismounting the bit (Fig. 7) Remove sub-stopper (G) as the same manner of hex- head socket and remove the bit holder, then pull out the bit with pliers. 3. Dismounting the bit (Fig. 8) Remove the sub-stopper (F) as the same manner of hex-head socket and remove the bit holder, then pull out the bit with pliers. 4. Mounting the hex-socket or the bit Install the bit in the reverse order to removal. HOW TO USE THE SCREW DRIVER 1. Switch operation and rotational speed adjustment Bit rotational speed can be adjusted between 0 – 6000/min (W6VM) or 0 – 4500/min (W6V4) or 0 – 3000/min (W6VA4) or 0 – 2600/min (W6VB3) or 0 – 1700/min (W8VB2) varying the degree by which the trigger switch is pulled. Rotational speed increases as the trigger switch is pulled, and reaches a maximum speed of 6000/min (W6VM) or 4500 /min (W6V4) or 3000/min (W6VA4) or 2600 /min (W6VB3) or 1700/min (W8VB2) when the trigger switch is pulled fully. To facilitate continuous operation, pull the trigger switch and depress the switch stopper. The switch will then remain ON even when the finger is released. By pulling the trigger switch again, the switch stopper disengages and the switch is turned OFF when the trigger switch is released. 2. Screw Driver operation When the switch is turned ON, the motor starts to run but the hex-socket (or the bit) does not rotate. Attach the hex-socket to the screw head groove, and push the Screw Driver against the screw. The hex-socket then rotates and tightens the screw. CAUTION Ensure that the Screw Driver is held truly perpendicular to the head of the screw. If held at an angle, the driving force will not be fully ...

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории