Оценок - 5, средний балл: 3.4
(
)
)
|
Фрагмент инструкции
it has an 18,000 RPM free speed with an average 4 CFM air consumption. Thumb Lock & Trigger Valve Figure 1. Model T23093. Inventory Drill w/Chuck......................................................1 Chuck Key.........................................................1 Quick-Disconnect Air inlet Adapter Vi" NPT......1 Bottle for Oil......................................................1 Specifications Maximum Bit Diameter....................................3/8" Maximum Free Speed..................... 18,000 RPM Average Air Consumption......................... 4 CFM Air inlet Size............................................Vi" NPT Air Hose Size Required...................................3/8" Maximum Air Pressure.............................90 PSI Awarning EYE/EAR INJURY HAZARD! Wear safety glasses and hearing protection during use of this tool! flZED /! -► INJURY HAZARD! Always disconnect tool from air to prevent unexpected operation during service! >• \'T/ ! f EXPLOSION HAZARD! Never exceed 90 PSI! Operation 1. install the bit into the chuck, then tighten it in place with the chuck key. 2. To keep the moving parts lubricated, remove the air inlet protective cap and add 3-4 drops of tool oil into the inlet. 3. Wrap the threads of the quick-disconnect adapter with plumber's tape, then thread it into the air inlet. 4. Attach the drill to clean, regulated compressed air that is no greater than 90 PSi. 5. Move the thumb lock forward, then press the trigger to start the drill. 6. if necessary, adjust the speed of the drill by adjusting the air flow valve located on the body near the air inlet. 7. When finished, disconnect the drill from the compressed air system. COPYRiGHT © MARCH, 2011 BY GRiZZLY iNDUSTRiAL, iNC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC. #TS13999 PRiNTED iN CHiNA T23093 Parts Breakdown and List REF PART # DESCRIPTION REF PART # DESCRIPTION 1 N/A DRILL BODY 2 N/A VALVE BUSHING 3 N/A TRIGGER 4 N/A TRIGGER LOCK 5 N/A TRIGGER SPRING 6 N/A ROLL PIN 1.5 X 20 7 N/A PIN 3 X 20 8 N/A O-RING 4.8 X 1.6MM 9 N/A O-RING 5.6 X 2MM 10 N/A VALVE STEM 11 N/A VALVE STEM COMPRESSION SPRING 12 N/A AIR REGULATOR 13 N/A O-RING 7 X 2MM 14 N/A O-RING 12 X 3MM 15 N/A VALVE PLUG 16 N/A MUFFLER COVER 17 N/A AIR INLET 18 N/A AIR INLET PLUG 19 P626ZZ BALL BEARING 626ZZ 20 N/A ROTOR BRACKET 21 N/A ROLL PIN 2 X 6 22 N/A ROTOR 23 N/A ROTOR BLADE 24 N/A ROTOR CYLINDER 25 N/A ROTOR BUSHING 26 N/A CYLINDER END PLATE 27 N/A CYLINDER END CAP 28 N/A STEEL BALL 2MM 29 N/A BALL BEARING 6000Z 30 N/A CHUCK SEAT 31 N/A CHUCK RETAINER 32 N/A RUBBER CUSHION 33 N/A CHUCK 34 N/A CHUCK SCREW Parts breakdown provided for reference only. Not all parts shown are available for purchase. -2- T23093 industrial %" Air Drill...