Оценок - 1, средний балл: 3
(
)
)
|
Фрагмент инструкции
Stay alert, watch what you are doing and use common sense whenoperating a power tool. Do not usea power tool while you are tired orunder the influence of drugs, alcoholor medication. A moment of inattention while operating power tools may result in serious personal injury. 10. Use safety equipment. Always wear eye protection. Safety equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. 11. Avoid accidental starting. Ensure the switch is in the off-position before plugging in. Carrying tools with your finger on the switch or plugging in power tools that have the switch on invites accidents. 12. Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. 13. Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. 14. Dress properly. Do not wear looseclothing or jewellery. Keep your hair,clothing and gloves away from moving parts. Loose clothes, jewellery, or long hair can be caught in moving parts. 15. If devices are provided for the of dust extraction and facilities, ensure these are and properly used. Use of these devices can reduce dust-2 16. Do not force the power tool. Use thecorrect power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. 17. Do not use the power tool if the switchdoes not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. 18. Disconnect the plug from the powersource and/or the battery pack fromthe power tool before making anyadjustments, changing accessories,or storing power tools. Such preventive safety measures reduce the risk of starting the tool accidentally. 19. Store idle power tools out of the reachof children and do not allow personsunfamiliar with the power tools orthese instructions to operate powertools. Power tools are dangerous in the hands of untrained users. 20. Maintain power tools. Check formisalignment or binding of movingparts, breakage of parts and anyother condition that may affect thepower tool's operation. If damaged,have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. 21. Keep cutting tools sharp and clean.Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. 22. Use the power tool, accessories andtool bits etc., in accordance with these instructions and in the manner intended for the particular type ofpower tool, taking into account theworking conditions and the work tobe performed. Use of the power tool for operations different from those intended could result in a hazardous situation. SERVICE 23. Have your power tool serviced by aqualified repair person using onlyidentical replacement parts...
Эта инструкция также подходит к моделям:Дрели и шуропопверты - 5378-20 (1.38 mb)
Дрели и шуропопверты - 5378-20 (1.38 mb)
Дрели и шуропопверты - 5378-21 (1.38 mb)
Дрели и шуропопверты - 5378-20 (1.38 mb)