Войти:
Оценок - 5, средний балл: 3.6 ( )

Инструкция по эксплуатации Buffalo Technology, модель TeraStation Pro II TS-HTGL/R5

Производитель: Buffalo Technology
Размер: 3.34 mb
Название файла: de7104cd-cc37-462d-994b-2b9c16737e73.pdf
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


See page 55 for more information on using the TeraStation with a UPS. 1 TeraStation Layout TeraStation Layout Power Button – Press and release the Power Button to turn the TeraStation on. Hold it down for three seconds to turn the TeraStation off. Hard Drive Access – The Access LEDs will blink green when the associated hard drive is accessed. During startup, it’s normal for all the lights to blink. Hard Drive Cage – The tubular lock prevents physical access to hard drives when locked. See page 71 for information on replacing hard drives. 0 TeraStation Layout TeraStation Layout The Status LCD can be configured to display specific TeraStation information. Please see page 62 to configure the various display options. INIT Button – The INIT button restores your TeraStation to factory default settings. See page 62 for more information on using the INIT button. It’s located on the underside of the display, and only accessible while the door is open. 1 TeraStation Layout TeraStation Layout UPS interface – An Uninterruptable Power Supply can use this serial port to safely shut down your TeraStation in the event of a power failure. This interface is non-LPS. DP-1, DP-1P, DP-2, or DP-2P cables may be used to connect to the UPS. The TeraStation Pro also supports many USB Uninterruptable Power Supplies. 10/100/1000 Mbps Ethernet Port – Use this port to connect your TeraStation to a switch, a router, or another computer. The port is autosensing, so either a conventional Ethernet cable or a crossover Ethernet cable may be used. USB Ports – TeraStation offers two USB 2.0/1.1 ports for adding external drives or UPSs. Advanced Settings Advanced Settings The Configuration GUI The Configuration GUI may be accessed at any time by typing the IP address of your TeraStation into the URL bar of a browser running on a computer connected to the same network as the TeraStation. This works perfectly with OS X, Linux, and other non-Windows PCs. You may also open the Configuration GUI from NAS Navigator by clicking on Setup and choosing Configuration Settings. Advanced Settings Advanced Settings This login prompt will appear. Enter admin for the user name. Until you change it, the password for the admin account will be password. Press the OK button when finished. User name: admin Password: password See page 47 to change your password. If this login prompt does not appear, your DHCP server may not be functioning correctly. If DHCP is disabled, you may re-enable it, or verify that the TeraStation’s IP Address is in the same range as that of your PC. Note: Pages 67 and 68 describe how to configure the TeraStation with a Static IP Address. Advanced Settings Advanced Settings Welcome to the configuration GUI for the TeraStation! Bookmark this page in your browser so it can be easily accessed for future configuration changes. If the TeraStation’s IP Address changes, you will need to recreate the link. You can also get here by typing Web browser, where TeraStation_Name is the name of your TeraStation. You.are.now.at.Home. Notice that the Home button is lit up in yellow. You can navigate this menu by clicking on the buttons at the left of the screen. Here at “Home”, you can see basic information about your TeraStation’s current configuration. You may close this screen by clicking Logout at the bottom left, or just by closing the browser window. If you have lost your TeraStation, clicking I’m here! at the bottom left will cause it to beep, making it easier to find. Advanced Settings Advanced Settings Basic You may modify your TeraStation’s hostname and description under Hostname Setup... A friendly, easy-to-remember name (e.g. “TeraStation”) is recommended. Make sure that the date and time are correct in.Date and Time Setup. To synchronize time settings with those in your computer, press Use Local Time. To have your system time automatically set by an NTP server, enable NTP Server and enter an IP Address for the NTP server (e.g. 192.43.244.18) or use the supplied default NTP server. Ensure that both the Display Language and the Windows Client Language.are.set.to.languages. that you’re comfortable with. Once desired fields have been completed, press the Apply button. Advanced Settings Advanced Settings Network (IP Address Properties) In most networks, TeraStation will get its IP Address automatically from a DHCP server. You may disable DHCP here. If DHCP is disabled and an IP Address is not set manually, it will default to 1 .1 .11.1 0. The TeraStation’s IP Address, Subnet Mask, Default Gateway Address, and DNS Server address. may all be entered manually under IP Address Properties.. Ethernet Frame Size may also be set manually on this page. Only use JumboFrame settings when operating in a Gigabit environment where all other clients support the same JumboFrame setting... Click Apply after making any changes. Advanced Settings Advanced Settings Network (Workgroup/Domain) If you are unfamiliar with Domain/Active Direc...


Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории