Оценок - 4, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
This will free up all hard.drives.listed.under.Disk.Structure.. To configure an unconfigured array, put checks next to the hard disks you want included in the.array.(under.Disk Structure).and.choose. your.RAID mode...Click.Setup RAID Array.when. ready. It may take several minutes to complete setting up the RAID array. When it’s finished, a Disk Check.will.run. 1 Advanced Settings Advanced Settings Disk Management (Disk Check) . When.RAID Configuration is done, you’ll see this screen. To configure a new array, click on.RAID Array # and go back to the bottom of page 31. To set up shares turn to page 38. Advanced Settings Advanced Settings Disk Management (RAID Configuration) . You’ll.see.this.screen.when.your.new.RAID. Array is completely configured. Click on Shared Folders and turn to page 38 to begin setting up shares on your TeraStation. Advanced Settings Advanced Settings Disk Management (USB Settings) If you’ve plugged an external USB hard drive into one of the USB ports on your TeraStation, you may set it up from this page. Click on its name under USB Disk Setup to begin. Advanced Settings Advanced Settings Disk Management (USB hard drive setup) From here you can see your USB hard drive’s setup information. If the hard drive’s information isn’t displayed properly, try restarting your USB hard drive and then restarting your TeraStation. Some USB hard drives must be reformatted from within TeraStation before they can be assigned shares...Press Format USB Disk, or choose Disk Format from the left-side menu, to begin reformatting your USB hard disk. Turn to page 37 for more information on reformatting disks. Turn to page 38 to set up shares on your USB hard drives. 5 Advanced Settings Disk Management (Disk Check) To initiate a comprehensive disk check on a hard drive or array of drives, select the hard drive or array.that.you.want.to.check.from.the.Target Disk dropbox and click the Select Target button. 6 Advanced Settings Advanced Settings Disk Management (Disk Format) To format a hard drive or array, select it from the.Target Disk dropbox. Choose the file system.desired.from.the.File System dropbox (internal drives can only be formatted with XFS). Note that FAT32 has a 4 gigabyte file size limit. If you choose FAT32 for your file system, you will not be able to store files larger than 4 gigabytes on the drive. Buffalo Technology.recommends.the.XFS file system. Press.Select Target Disk.when.done... Depending on the size of the target hard disk or array, a Disk Format may take several hours to complete. 7 Advanced Settings Shared Folders To begin setting up shares on your TeraStation, select Shared Folders from the left side menu, and.then.click.the.Add button under Shared Folders Setup. 8 Advanced Settings Add a new Shared Folder To add a new shared folder, enter a name for it.in.the.Shared Folder Name box and choose which.Disk Space.it.will.reside.in...You.may. also choose which operating systems the share will support by putting the appropriate checks next to Shared Folder OS Support, and whether the share supports the Recycle Bin by putting a dot next to Enable.or.Disable. Enter a Shared Folder Description.and.a.Remote Backup Password.if.you.desire...Click.the.Apply button to build the new shared folder. Advanced Settings Advanced Settings Shared Folders (Access restrictions) To.use.Access Restrictions for a share, put a dot next to Enable... Highlight groups or users in the All Groups/ Users column and use the left-pointing arrow buttons (located just to the left of each box) to move individual groups or users from the All Groups/Users.column.to.the.Read Only box (if you.want.to.give.them.read.access.only).or.all. the.way.to.the.Writable box, if you want to give them full access to the share. Right-pointing arrows will move highlighted users or groups back to the right. Click.Apply when you have your groups and users in the appropriate boxes. To set up new groups and users, see pages 42 and 43. 0 Advanced Settings Advanced Settings Shared Folders (Anonymous FTP Setup) To allow Anonymous FTP, choose Enable.for.Anonymous FTP Server...Select.a.folder.to.share.from. the.Anonymous User Public Shared Folder (only one folder may be shared by anonymous FTP) and choose whether you want the share to be Writable, or Read Only...Click.the.Apply button to set up anonymous FTP. If.FTP Server is disabled in the Basic window, this page will not be accessible. Anonymous FTP mode uses port 8021 (i.e. ftp://IP Address:80 1). 1 Advanced Settings Group Management To.Delete a group, put a check next to its name and click.Delete. To add a group to your TeraStation, click.Add. Add a name and a description to the Add New Group fields. Put checks next to each Member User. that you want to be part of the group. Click Apply. when your group is set up the way you want it. Advanced Settings Advanced Settings User Management TeraStation is preconfigured with two users, admin. and. guest, out of the box. The guest. account. allows. n...