Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Setup Setup What’s in the box Bar Speaker (1) Subwoofer (1) Remote control (1) R6 (size AA) batteries (2) Optical digital cable for a TV (1) Wall mounting brackets (2) and screws (2) Sound BarStartup GuideHT-CT770Sound Bar Startup Guide (this book) (1) Operating Instructions (1) Setting up the remote control Pull up the battery cover and insert in the orientation shown in the illustration two AA batteries. Setup Setup Installation To install the Bar Speaker on a wall Refer to the supplied Operating Instructions. Setup / Setup / SetupSetup Setup / Setup / SetupSetup Connection Connecting with TV Or If the TV to be connected is not equipped with an optical audio output terminal, connect an HDMI cable (not supplied, High Speed type) to the HDMI input terminal labeled “ARC.” If the HDMI input terminal labeled “ARC” is connected with another device, disconnect that device and connect this Bar Speaker. TV Blu-ray Disc™ player, etc. This is a connection for enjoying surround sound more effectively. HDMI cable (not supplied, High Speed type) If the HDMI input terminal on the TV is not labeled “ARC,” perform connections both and . HDMI cable (not supplied, High Speed type) If it is connected to the TV, disconnect it and connect it to the Bar Speaker. Setup Setup Turning on the system ... Display On/standby lamp 1 Connect the AC power cords (mains leads). 2 Press the ... (on/standby) button. The display lights. 3 Confirm that the on/standby lamp of the subwoofer is lit in green. If not, the wireless transmission is not activated. Refer to “No sound is heard from the subwoofer.” of “Troubleshooting” in the supplied Operating Instructions. 4 Turn on the connected device. Setup / Setup / SetupSetup / Setup / SetupSetup / Setup / SetupSetup Setup / Setup / SetupSetup / Setup / SetupSetup / Setup / SetupSetup Listening to the sound Input device selected INPUT VOL .(input) .(volume) Listening to the audio of the TV 1 Press the .(input) button on the remote control or INPUT button on the Bar Speaker repeatedly to select “TV” input. 2 Press the .(volume) button on the remote control or VOL button on the Bar Speaker to adjust the volume. To listen to audio from an input device other than the TV Press the .(input) button on the remote control or INPUT button on the Bar Speaker repeatedly until the desired input device is indicated on the display. TV .HDMI 1 .HDMI 2 .HDMI 3 .ANALOG .BT AU Setup completed! Enjoy! Enjoying the sound effects To set a sound effect, press one of the sound effect buttons on the remote control to select the desired mode while checking the display. SOUND FIELD NIGHT VOICE SOUND F...