Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
. . .. . . . BDV-N890W What’s in the box/Setting up the speakers . . . .. . . . BDV-N890W BDV-N790W . . . . .. . . . Main unit . Front speakers . Surround speakers . Center speaker . Subwoofer . Surround amplifier What’s in the box What’s in the box R6 (size AA) batteries (2) FM wire antenna (aerial) Calibration mic Dock for iPod/iPhone Video cord or ( TDM-iP30) USB cable Wireless transceivers (2) 03 Main unitCENTERSUR RFRONT RSUBWOOFERFRONT LSUR LSurround amplierStart by positioning the speakers according to the labels on the rear panel. 1 04 Main unitCENTERSUR RFRONT RSUBWOOFERFRONT LSUR LSurround amplierStart by positioning the speakers according to the labels on the rear panel. 1 04 Next, connect the speakers to the main unit and surround amplifier. Next, connect the speakers to the main unit and surround amplifier. 05 06 Insert the wireless transceivers into the main unit and surround amplifier for a cable-free connection. 1 To enjoy high-quality video and audio, connect via a High Speed HDMI cable .(not supplied). If your TV has no HDMI ARC jack, you also need a digital optical 2 To enjoy high-quality video and audio, connect via a High Speed HDMI cable .(not supplied). If your TV has no HDMI ARC jack, you also need a digital optical 2 . . 07 To connect your set-top box, game console, or digital satellite receiver, simply connect with an HDMI cable .. For FM radio, connect the supplied 3 To connect your set-top box, game console, or digital satellite receiver, simply connect with an HDMI cable .. For FM radio, connect the supplied 3 . You can also connect your iPod or iPhone to the system and your TV via the supplied dock. . 08 or . . . You can connect to the Internet and home network via a wireless LAN or LAN cable (not supplied). Network settings can be found in the home menu (page 14). For further details, visit: You can connect to the Internet and home network via a wireless LAN or LAN cable (not supplied). Network settings can be found in the home menu (page 14). For further details, visit: To a broadband router 09 10 Connect the AC power cords (mains leads) of the main unit and surround amplifier to a wall outlet (mains). 3 Connect the calibration mic and place where you would normally sit. This will be used to optimize the speakers in the next section 4 Connect the calibration mic and place where you would normally sit. This will be used to optimize the speakers in the next section 4 11 Once [Easy Initial Settings are complete.] appears on the screen, select [Finish] and the system is ready to use. To ready the system for use, go through the on-screen Easy Initial Settings using the supplied remote. This should only take a few minutes. If the setup screen is not displayed, select the correct AV input in your TV. Press ./.to turn the system on. “SETUP” appe...
Эта инструкция также подходит к моделям:Домашние кинотеатры - BDV-N890W (1.34 mb)