Оценок - 4, средний балл: 4.5 ( )

Производитель: Sony Размер: 3.35 mb Название файла: Язык инструкции:

Фото и характеристики  Sony  BDV-IT1000

When you pair the unit with the S-AIR sub setting a different ID for each component. unit (page 102), [(Pairing)] appears beside ID on the display for selecting ID. To set the ID of the surround amplifier 1 Make sure that the SURROUND SELECTOR switch of the surround amplifier is set to SURROUND. 2 Set the S-AIR ID switch of the surround amplifier to match the ID (A, B, or C) of the unit. 3 Press POWER on the surround amplifier. When sound transmission is established, the POWER / ON LINE indicator of the surround amplifier turns green. For details of the POWER / ON LINE indicator, see “To check the transmission status” (page 67). HDMI S-AIR Other S-AIR main unit S-AIR main unit (This unit) ID A S-AIR sub unit ID A S-AIR sub unit ID B S-AIR sub unit ID A ID B Tip • When you use the additional surround amplifier (optional) with the surround back speakers (optional), set the SURROUND SELECTOR switch to SURROUND BACK. To set the ID of the S-AIR receiver Refer to the operating instructions of the S-AIR receiver. 100GB Enjoying the system’s sound in another room For the S-AIR receiver You can enjoy the system’s sound by using the S-AIR receiver. The S-AIR receiver can be installed anywhere, regardless of the location of the unit, for enjoying the system’s sound in another room. For details of the S-AIR receiver, refer to the operating instructions of the S-AIR receiver. 1 Set the ID of the S-AIR receiver to that of the main unit. • To set the ID of the unit, see “To set the ID of the unit” (page 99). • To set the ID of the S-AIR receiver, refer to the operating instructions of the S-AIR receiver. 2 Press S-AIR MODE on the remote of the main unit. The S-AIR mode appears in the front panel display. Each time you press S-AIR MODE, the S-AIR mode changes. •“PARTY”: The S-AIR receiver outputs sound according to function set on the unit. • “SEPARATE”: You can set the desired function for the S-AIR receiver while unit functions do not change. 3 Select the desired function on the S-AIR receiver. x When “PARTY” is set The S-AIR receiver’s function changes sequentially as you press FUNCTION of the main unit (page 73). x When “SEPARATE” is set The S-AIR receiver’s function changes as follows. “MAIN UNIT” t “TUNER FM” t “TUNER AM” t “DMPORT” t … To enjoy the same function as the unit, select “MAIN UNIT.” When “TUNER FM” or “TUNER AM” is selected on the unit, you can only select the same band for the tuner on the S-AIR receiver. In this case, when you select other than “TUNER FM” or “TUNER AM” on the unit, you can select any band for the tuner on the S-AIR receiver. 4 Adjust the volume on the S-AIR receiver. Note • When the sound is other than 2 channel stereo, multi channel sound is downmixed to 2 channel. • The sound of the S-AIR receiver may be cut off by operation of the unit. To control the system from the S-AIR receiver You can control the system from the S-AIR receiver by using the following buttons. Press Operation H, X, x, Share the same operations on the ./> remote and unit. S-AIR CH Change the function of the system. For details, refer to the operating instructions of the S-AIR receiver. External Audio Device 101GB Enjoying the S-AIR receiver while the unit is in standby mode For the S-AIR receiver You can enjoy the S-AIR receiver while the unit is in standby mode by setting [S-AIR Standby] to [On]. 1 Press "/1. The system turns on. 2 Press HOME. The home menu appears on the TV screen. 3 Press C/c to select [Setup]. 4 Press X/x to select [System Settings], then press . 5 Press X/x to select [S-AIR Standby], then press . 6 Press X/x to select the desired setting. • [On]: You can enjoy the S-AIR receiver while the unit is in standby mode or turned on. •[Off]: You cannot enjoy the S-AIR receiver while the unit is in standby mode. 7 Press . The setting is made. Note • When you set [S-AIR Standby] to [On], the power consumption during the standby mode increases. • When you turn the system off while [S-AIR Standby] is set to [On], “S-AIR” flashes (when sound transmission between the unit and S-AIR receiver is not established), or lights up (when sound transmission between the unit and S-AIR receiver is established) in the front panel display. • If you turn the system off with the disc tray opened while [S-AIR Standby] is set to [On], the disc tray may not close automatically. • When the wireless transceiver is not inserted in the unit, you cannot set the [S-AIR Standby]. • [S-AIR Standby] is set to [Off] automatically when the wireless transceiver is removed from the unit. Using the surround amplifier for the surround back speakers For the surround amplifier When you use the additional surround amplifier (optional) with surround back speakers (optional), set the SURROUND SELECTOR switch to SURROUND BACK. For details about the surround back speakers, see “About the surround back speaker” (page 38). Identifying the unit with a specific S-AIR sub unit (Pairing operation) For the surround amplifier For the S-AIR receiver It i...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: