Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
6. Withdraw the USB device carefully. y y This player supports USB flash drive/ external HDD formatted in FAT16, FAT32 and NTFS when accessing files (music, photo, movie). However, for BD-LIVE and Audio CD recording, only FAT16 and FAT32 formats are supported. Use the USB flash drive/ external HDD formatted in either FAT16 or FAT32 when using BD-LIVE and Audio CD recording. y y The USB device can be used for the local storage for enjoying BD-LIVE discs with Internet. y y This unit can support up to 8 partitions of the USB device. y y Do not extract the USB device during operation (play, etc.). y y A USB device which requires additional program installation when you have connected it to a computer, is not supported. y y USB device: USB device that supports USB1.1 and USB2.0. y y Movie, music and photo files can be played. For details of operations on each file, refer to relevant pages. y y Regular back up is recommended to prevent data loss. y y If you use a USB extension cable, USB HUB or USB Multi-reader, the USB device may not be recognized. y y Some USB device may not work with this unit. y y Digital camera and mobile phone are not supported. y y USB Port of the unit cannot be connected to PC. The unit cannot be used as a storage device. ,,Note System Setting 31 Syst em Se tting 3 Settings Adjust the Setup Settings You can change the settings of the player in the [Setup] menu. 1. Press HOME MENU (n). 2. Use A/D to select the [Setup] and press ENTER (b). The [Setup] menu appears. 3. Use W/S to select the first setup option, and press D to move to the second level. 4. Use W/S to select a second setup option, and press ENTER (b) to move to the third level. 5. Use W/S to select a desired setting, and press ENTER (b) to confirm your selection. [DISPLAY] Menu TV Aspect Ratio Select a TV aspect ratio option according to your TV type. [4:3 Letter Box] Select when a standard 4:3 TV is connected. Displays theatrical images with masking bars above and below the picture. [4:3 Pan Scan] Select when a standard 4:3 TV is connected. Displays pictures cropped to fill your TV screen. Both sides of the picture are cut off. [16:9 Original] Select when a 16:9 wide TV is connected. The 4:3 picture is displayed with an original 4:3 aspect ratio, with black bars appearing at the left and right sides. [16:9 Full] Select when a 16:9 wide TV is connected. The 4:3 picture is adjusted horizontally (in a linear proportion) to fill the entire screen. You cannot select [4:3 Letter Box] and [4:3 Pan Scan] option when the resolution is set to higher than 720p. ,,Note 32 System Setting Syst em Se tting 3 Resolution Sets the output resolution of the Component and HDMI video signal. Refer to page 24 and 60 for details about the resolution setting. [Auto] If the HDMI OUT jack is connected to TVs providing display information (EDID), automatically selects the resolution best suited to the connected TV. [1080p] Outputs 1080 lines of progressive video. [1080i] Outputs 1080 lines of interlaced video. [720p] Outputs 720 lines of progressive video. [576p] Outputs 576 lines of progressive video. [576i] Outputs 576 lines of interlaced video. 1080p Display Mode When the resolution is set to 1080p, select [24 Hz] for smooth presentation of film material (1080p/24 Hz) with a HDMI-equipped display compatible with 1080p/24 Hz input. y y When you select [24 Hz], you may experience some picture disturbance when the video switches video and film material. In this case, select [50 Hz]. y y Even when [1080p Display Mode] is set to [24 Hz], if your TV is not compatible with 1080p/24 Hz, the actual frame frequency of the video output will be 50 Hz to match the video source format. y y Since several factors affect the resolution of video output, see "Video Output Resolution" on page 60. ,,Note HDMI Color Setting Select the type of output from the HDMI OUT jack. For this setting, please refer to the manuals of your display device. [YCbCr] Select when connecting to a HDMI display device. [RGB] Select when connecting to a DVI display device. 3D Mode Select the type of output mode for Blu-ray 3D disc playback. [Off] Blu-ray 3D disc playback will output as 2D mode like a normal BD-ROM disc playback. [On] Blu-ray 3D disc playback will output as 3D mode. System Setting 33 Syst em Se tting 3 [LANGUAGE] Menu Display Menu Select a language for the [Setup] menu and onscreen display. Disc Menu/Disc Audio/ Disc Subtitle Select the language you prefer for the audio track (disc audio), subtitles, and the disc menu. [Original] Refers to the original language in which the disc was recorded. [Other] Press ENTER (b) to select another language. Use number buttons then press ENTER (b) to enter the corresponding 4-digit number according to the language code list on page 58. [Off] (Disc Subtitle only) Turn off Subtitle. Depending on the disc, your language setting may not work. ,,Note [AUDIO] Menu Speaker Setup To obtain the best possible sound, use the speaker setup display to specif...
Эта инструкция также подходит к моделям:Домашние кинотеатры - BCS-414 (43.16 mb)