Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
The mode switches as follows: DVD/CD . DIGITAL IN . AUX 1 . AUX 2 . FM . AM. 1 Connect the Digital Input (OPTICAL) to the Digital Output on the external digital component. 3 Example: Digital signal components such as a Set-Top Box or CD Recorder. Connecting an External Digital / Analog Component Optical Cable (not included) Audio Cable (not supplied) If the external analog component has only one Audio Out, connect either left or right. The cooling fan supplies cool air to the unit to prevent overheating. Please observe the following cautions for your safety. • Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the unit could rise and may damage it. • Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are covered with a newspaper or cloth, heat may build up inside the unit and fire may result.) Cooling Fan FM antenna connection AM antenna connection 1. Connect the FM antenna supplied to the FM 75. COAXIAL terminal. 2. Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface. 1. Connect the AM loop antenna supplied to the AM and terminals. • Insert the black wire into the black terminal and the white wire into the white terminal. 2. If reception is poor, connect an outdoor single vinyl-covered wire to the AM terminal. (Keep the AM loop antenna connected). Snap the tabs on the loop into the slots of the base to assemble the AM loop antenna. FM Antenna (supplied) AM Loop Antenna (supplied) If AM reception is poor, connect an outdoor AM antenna(not supplied). Before Using Y our Home Theate r Your Home Theater is capable of playing DVD, CD, MP3, DivX and JPEG discs.Depending on the disc you are using, these instructions may vary slightly. Read the instructions carefully before using. GB Disc terminology Groups and tracks (DVD-AUDIO) • DVD-audio is divided into several large sections called "groups" and smaller sections called "tracks". Numbers are allotted to these sections. These numbers are called "group numbers" and "track numbers". function of the remote control. Titles and chapters (DVD-VIDEO) GROUP 1 GROUP 2 TRACK 1 TRACK 2 TRACK 1 TRACK 2 TRACK 3 1 Plug the main unit's power cord into the AC power supply. 3 3 2 2 Press POWER button to turn on Press MODE button the main unit and then press until the DVD DVD button to select “ DVD/CD” indicator lights. DVD RECEIVERTV • DVD-video is divided into several large sections called "titles" and smaller sections called "chapters". Numbers are allotted to these sections. These numbers are called "title numbers" and "chapter numbers". Press FUNCTION button 6 on the main unit or DVD TITLE 1 TITLE 2 CHAPTER 1 CHAPTER 2 CHAPTER 1 CHAPTER 2CHAPTER 3 Tracks (Video and music CDs) on the remote to select • Video and music CDs are divided into sections called "tracks". DVD/CD mode. Numbers are allotted to these sections. These numbers are called "track numbers". OPERATION TV DVD RECEIVER 4 Press the MODE button until the TV indicator llights. 5 5 Press POWER button to turn on the Home Theater and then press TV/VIDEO button on your TV remote to select“ External Input” mode. TRACK 1 TRACK 2 TRACK 4 TRACK 5 TRACK 3 Files (DivX) • DivX is divided into sections called "files". Numbers are allotted to these sections. These numbers are called To Operate the TV and DVD Player with "file numbers" . Press MODE button. FILE 1 FILE 2 • You can operate the TV after TV indicator (red) blinks 1 time, and operate DVD (green) blinks 1 time. • Buttons Enabled for TV Operation: POWER, CHANNEL, VOLUME, TV/VIDEO, and Numeric (0-9) buttons. • By default, the remote control is set TVs. See page 65 for more information DVD Note • In this manual, the instructions )" are applicable to DVD-VIDEO, DVD-discs. Where a particular 20 • Depending on the Disc Playback MP3-CD Playback Data CDs (CD-ROM, CD-R, CD-RW) encoded in MP3 format can be played. GB MP3 2 Load a disc. 1 Press OPEN/ CLOSE button to open the disc tray. Note • Place a disc gently into the 3 Press OPEN/ CLOSE button to close the disc tray. DVD VCD CD and then load the press the ENTER tray with the disc’s label facing up. MP3 disc. button. • Playback starts automatically. • The MP3 menu screen will appear and playback will start. • The appearance of the menu depends on the MP3 disc. 1 1 Press the 2 2 In Stop mode, use OPEN/CLOSE button to select to open the disc tray, the album, and then • Depending on the content of the disc, the initial screen may appear different. To stop playback, press STOP during playback. • If pressed once, “ PRESS PLAY” is displayed and the stop position will be stored in memory. If PLAY/PAUSE ( ) button or ENTER button is pressed, playback resumes from the stop position. (This function works only with DVDs. ) • If pressed twice, “ STOP” is displayed, and if PLAY/PAUSE ( ) button is pressed, playback starts from the beginning. OPERATION 3 3 To change the a...