Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
If the audio format on the disc is not supported, it will be downmixed to two-channel sound (linear-PCM). • [ Off ] – disable audio output from your TV. The sound is only output through this speaker system. [ Audio Sync ] Set the default delay time for audio output when you play a video disc. 1. To star t, press OK. 2. Press b B to set the delay time. 3. Press OK to confirm and exit. [ Night Mode ] Make loud sound level softer and soft sound level louder so that you can watch the DVD movies at a low volume, without disturbing others. Note • This setting is only applicable to Dolby Digital encoded DVD. • [ On ] – for quiet viewing at night (DVDs only). • [ Off ] – enjoy surround sound with a full dynamic range. [ CD Upsampling ] Convert the music CD to a higher sampling rate using sophisticated digital signal processing for better sound quality. • [ Off ] – turn off CD-upsampling. • [ On ] – convert the sampling rate of the CDs twice as high as the original rate. Video setup 1 Press OPTIONS. • [ General Setup ] menu is displayed. 2 Press V to select [ Video Setup ], then press B. 3 Select an option, then press OK. Video Setup TV Type TV Display Picture Setting HDMI Setup Closed Caption • See the explanations of the above options in the following pages. 4 Select a setting, then press OK. • To return to the previous menu, press BACK. • To exit the menu, press OPTIONS. Adjust settings English EN 33 34 EN [ TV Type ] If the video does not appear correctly, change the setting. By default, this setting matches the most common setting for TVs in your country. • [ PAL ] – for PAL-system TV. • [ NTSC ] – for NTSC-system TV. • [ Multi ] – for TV that is compatible with both PAL and NTSC. [ TV Display ] Select the screen format according to how you want the picture to appear on your TV. 4:3 Pan Scan (PS) 4:3 Letter Box (LB) 16:9 (Wide Screen) • [ 4:3 Pan Scan ] – for standard TV, a full-height screen display with the sides trimmed. • [ 4:3 Letter Box ] – for standard TV, a ‘wide-screen’ display with black bars on the top and bottom. • [ 16:9 Wide Screen ] – for wide-screen TV (frame ratio 16:9). [ Picture Setting ] Select a predefi ned set of picture colour settings or customise your personal setting. • [ Standard ] – original colour setting. • [ Bright ] – vibrant colour setting. • [ Soft ] – warm colour setting. • [ Personal ] – customise the colour setting. Set the level of brightness, contrast, tint and colour saturation in the menu, then press OK. [ HDMI Setup ] When you connect this unit and TV with HDMI cable, select the best HDMI setup that your TV can support. • [ Wide Screen Format ] – defi ne the wide screen format for disc play. Options Descriptions [ Superwide ] Centre position of the screen is stretched less than the side. This setting is only applicable if the video resolution is set to 720p or 1080i/p. [ 4:3 Pillar Box ] No stretching of the picture. Black bars are displayed on both sides of the screen. [ Off ] Picture will be displayed according to the format of the disc. Note • This setting is only available if you have set the [ TV Display ] setting to [ 16:9 Wide Screen ]. • [ HDMI Video ] – select a video resolution that is compatible with your TV display capability. Options Descriptions [ Auto ] It detects and selects the best supported video resolution automatically. [ 480p, 576p, 720p, 1080i, 1080p ] Select a video resolution that best supported by your TV. See your TVs manual for details. Note • If the setting is not compatible with your T V, a blank screen appears. Wait for 15 seconds for auto recover or switch to its default mode as follows: 1) Press Z. 2) Press b. 3) Press ZOOM. [ Closed Caption ] Turn on or off display captions. • [ On ] – show the sound effects in subtitle. Only applicable to disc with Closed Caption information included and your TV supports this feature. • [ Off ] – disable closed caption. Preference Setup 1 Press OPTIONS. • [ General Setup ] menu is displayed. 2 Press V to select [ Preference Setup ], then press B. 3 Select an option, then press OK. Preference Setup Audio Subtitle Disc Menu Parental PBC MP3/JPEG Nav Password DivX Subtitle • See the explanations of the above options in the following pages. 4 Select a setting, then press OK. • To return to the previous menu, press BACK. • To exit the menu, press OPTIONS. Adjust settingsEnglish EN 35 [ Audio ] Select the default audio language for DVDs. [ Subtitle ] Select the default subtitle language for DVDs. [ Disc Menu ] Select the menu language for DVDs. Note • If the language you have set is not available on the disc, the disc uses its own default language. • For some DVDs, the subtitle/audio language can only be changed from the disc menu. • To select the languages that are not listed in the menu, select [ Others ]. Then check the Language Code list at the back of this user manual and enter the respective 4-digit language code. [ Parental ] Restrict access to DVDs that are unsuitable for your children. These types o...