Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
No picture. Completely distorted picture or black/white picture. No sound or distorted sound. No surround sound effect from the speakers. The remote control does not function properly. – Press STANDBY-ON on the unit to turn on the power. – Make sure the mains cord is properly connected and the AC outlet has power. – Refer to your TVs manual for correct Video In channel selection. Change the TV channel until you see the DVD screen. – Press DISC/USB to select disc mode. – If this happens when you turn on the progressive scan feature, wait for 15 seconds for the auto recovery or switch back to the default mode as below: 1) Press OPEN/CLOSE c. 2) Press • on the remote control. 3) Press AUDIO on the remote control. – Check the video connection. – Sometimes a small amount of picture distortion may appear. This is not a malfunction. – The disc is dirty. Clean the disc. – Adjust the volume. – Check the speaker connections and settings. – Make sure that the audio cables are connected and press SOURCE to select the correct input source (for example, TV or AUX/DI) to choose the device that you want to hear through this unit. – Press SURROUND to select a correct surround sound setting. – Make sure that the source you are playing is recorded or broadcast in surround sound (DTS, Dolby Digital, etc). – Select the source you want to play (for example, DISC/USB or RADIO) before pressing the function button (.., i/e). – Reduce the distance between the remote control and this unit. – Batteries are weak, replace the batteries. – Point the remote control directly toward the IR sensor. 46 Troubleshooting (continued) Problem (Playback) Solution The unit does not start playback. The aspect ratio of the screen cannot be changed even though you have set the TV display. Cannot activate some features e.g. Angles, Subtitles, or multi-language Audio. Not able to select some items in the setup/system menu. Unable to play DivX movies. Radio reception is poor. The unit does not work. – Insert a readable disc with the playback side facing down. The DVD+R/CD-R must be Finalised. – Make sure the disc is not scratched or warped. – Press SETUP to turn off the system setup menu screen. – You may need to enter the password in order to unlock the disc for playback. – Moisture may have condensed inside this unit. Remove the disc and leave this unit turned on for about an hour. – The aspect ratio is fixed on the DVD disc. – Depending on the TV, it may not be possible to change the aspect ratio. – The features may not be available on the DVD. – Changing the language for the sound or subtitle is prohibited on this DVD. – Press STOP button twice before selecting the system setup menu. – Depending on the disc availability, some menu items cannot be selected. – Ensure that the DivX file is encoded according to the ‘Home Theatre Profile’ with the DivX encoder. – Check that the DivX movie downloaded is a complete fi le. – If the signal is too weak, adjust the antenna or connect an external antenna for better reception. – Increase the distance between this unit and your TV or VCR. – Tune in to the correct frequency. – Place the antenna further away from any equipment that may be causing the interference. – Disconnect the power cord from the power outlet for a few minutes. Reconnect the power cord and try to operate again as usual. English 47 Troubleshooting (continued) English Problem (USB) Solution The contents of the USB fl ash – The USB flash drive format is not compatible with this drive cannot be read. unit. – Drive is formatted with a different file system which is not supported by this unit (e.g. NTFS). Slow operation of the USB – Large file size or high memory USB flash drive takes fl ash drive. longer time to read and display on the TV. 48 Frequently Asked Questions (USB) Why does it take so long to display the contents on my USB device? – This could be due to the large numbers of files (>500 files/folders) or size of the fi les (>1MB). – There could be other non-supported files in the device that this unit is trying to read/display. What if un-supported devices (e.g. USB mouse, keyboards) are plugged into this unit? The device may cause this unit to be unstable. Remove the unsupported device and unplug the mains cord. Wait for a few minutes before reconnecting the mains cord and power on this unit again. What happens when I plug in a USB HDD? HDD is not supported as the large storage capacity makes navigation very difficult. Transfer the music files (mp3) and photos (jpg) into a flash drive. Why does this unit fail to detect my USB portable music player? The portable music player may require propriety software that is bundled with our system in order to access the contents (eg. playlist). MTP class not supported, only can support mass storage class devices. What types of file does this unit support? We support only FAT16 and FAT32, not NTFS. Why does the file name appear to be different from what was displayed on my computer (e.g. from ‘Good Bye. ...