Оценок - , средний балл:
(
)
)
Производитель: Philips
Размер: 1.75 mb
Название файла:
Язык инструкции:
Документ загружается, подождите пожалуйста
 |
Документ загружается, подождите пожалуйста
Фрагмент инструкции
6 Press (Home) to exit Picasa menu. View albums and slideshows 1 Press the Navigation buttons to select My Photos from the Picasa menu, and then press OK. » » The photo albums in your Picasa Web Albums are displayed. 2 Press the Navigation buttons to select a photo, and then press OK to view the photo in full screen. EN 3 Press OK again to view the photos in a slideshow. 4 While viewing a slideshow, press OPTIONS and Navigation buttons to select one of the following, and then press OK: • Current playing: Display the index of the current photo. • Slideshow pause/ play: Select to pause or play a slideshow. • Rotate: Select to rotate the current photo. • Zoom: Select to zoom in or zoom out the photo. • Effect: Select a slideshow effect. • Speed: Select a slideshow speed. • Friends: Add the owner of the current photo to the friends list. 5 Press BACK to return to the previous screen. EasyLink The home theater supports Philips EasyLink, which uses the HDMI-CEC (Consumer Electronics Control) protocol. EasyLink-compliant devices that are connected through HDMI can be controlled by a single remote control. Philips does not guarantee 100% interoperability with all HDMI-CEC devices. What you need • HDMI-CEC compliant devices. • An HDMI connection between the connected devices. Switch on 1 On the TV and other connected devices, turn on the HDMI-CEC operations. For details, see the manual of the TV or other devices. 2 Press (Home). 3 Select [Setup], and then press OK. 4 Select [EasyLink] > [EasyLink], and then press OK. 5 Select [On], and then press OK. Control devices Control the home theater and the other connected HDMI-CEC compliant devices with a single remote control. One-touch play If you enable One-touch play, the TV automatically switches to the correct channel when you play a disc in your home theater. One-touch standby When you press and hold (Standby) on the remote control, the home theater and all the connected HDMI-CEC devices (that support one-touch standby) switch to the standby mode. If one-touch standby is enabled on your home theater, you can switch to standby with the remote control of the TV or other HDMI-CEC devices. System Audio Control When you play a device that has its audio output routed to the home theater, the home theater switches to the corresponding audio source automatically. To use one-touch audio, turn on System Audio Control and follow the instructions on the TV to map connected devices to the audio input connectors of the home theater. Audio Input Mapping When you connect a new device to your home theater, map the device to the audio input connector (see ‘Play audio from home theater’ on page 22). Play audio from home theater Play the audio from a connected device through your home theater. 1 Press (Home). 2 Select [Setup], and then press OK. 3 Select [EasyLink] > [System Audio Control] > [On], and then press OK. • To play the audio from the TV speakers, select [Off], and skip the following steps. 4 Select [EasyLink] > [Audio Input Mapping], and then press OK. 5 Follow the instructions on the TV to map the audio of the connected device to the audio inputs on your home theater. Note • • If you connect your home theater to the TV through an HDMI ARC connection, make sure that the TV audio is mapped to the ARC input on your home theater. EN 7 Change settings This section helps you to change the settings of your home theater. Caution • • Most of the settings are already configured with the best value for your home theater. Unless you have a reason to change a setting, it is best to leave it at the default value. Note • • You cannot change a setting that is grayed out. • • To return to the previous menu, press BACK. To exit the menu, press (Home). Picture Change the picture settings to suit your preferences. Note • • The best setting is automatically selected for the TV. If you change the setting, make sure that the TV supports the new settings. Picture settings and format 1 Press (Home). 2 Select [Setup], and then press OK. 3 Select [Video], and then press OK. 4 Change the following settings, and then press OK: • [TV Display]: Picture format. • [Picture Settings]: Predefined color settings. Picture color Deep Color recreates the natural world on your TV screen and displays vivid images in over a billion of colors. If your TV supports Deep Color and is connected to your home theater through an HDMI cable, you can change the Deep Color. 1 Press (Home). 2 Select [Setup], and then press OK. 3 Select [Video] > [HDMI Deep Color], and then press OK. 4 Select the following options, and then press OK: • [Auto]: Automatically select HDMI Deep Color. • [On]: View vivid images. • [Off]: Display standard 8-bit color. Picture resolution For HDMI video settings, connect your home theater to the TV through an HDMI cable. 1 Press (Home). 2 Select [Setup], and then press OK. 3 Select [Video] > [HDMI Video], and then press OK. 4 Change the HDMI resolution setting, and then press OK. Sound Change the sound ...