Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
2 Select [Setup] and then press OK. 3 Select [General] and then press OK. • [OSD Language]: Select a display language for menu. Disc language 1 Press (Home). 2 Select [Setup] and then press OK. 3 Select [Preferences] and then press OK. • [Audio]: Select an audio language for discs. • [Subtitle]: Select a subtitle language for discs. • [Disc Menu]: Select a menu language for discs. Note ••If your preferred disc language is not available, select [Others] from the list, and enter the 4-digit language code found at the end of this user manual (see 'Language code' on page 26). ••If you select a language that is not available on a disc, the home theater uses the default language of the disc. Picture and video settings 1 Press (Home). 2 Select [Setup] and then press OK. 3 Select [Video] and then press OK. • [TV System]: Select a video format supported by the TV. • [TV Display]: Select a picture format to fit the TV screen. • [Picture Setting]: Select animation for the slide show. • [HD JPEG]: Enable this feature to view high-definition JPEG pictures through HDMI connection. • [HDMI Setup]: Access the following setup through HDMI connection. * [Resolution]: Select a resolution for high definition videos. * [HDMI Deep Color]: Recreate the natural world on your TV screen by displaying vivid images using billion colors. Your home theater must be connected to a Deep Color enabled TV through an HDMI cable. * [Wide Screen]: Select a display format for wide screen videos. * [EasyLink Setup]: Set up EasyLink control (see 'Set up EasyLink (HDMI- CEC control)' on page 10). Note ••If you change a setting, make sure that the TV supports the new setting. EN Audio settings 1 Press (Home). 2 Select [Setup] and then press OK. 3 Select [Audio] and then press OK. • [HDMI Audio]: Set the HDMI audio output from your TV, or disable HDMI audio output from the TV. • [Audio Sync]: Set audio delay if audio and video cannot be matched. • [Speaker Setup]: Set up speakers for best surround sound experience. • [Sound Mode]: Select a predefined sound mode to suit your video and music. • [Treble/Bass]: Set the high frequency (treble) and low frequency (bass) settings of the home theater. • [Night Mode]: Select quiet or full dynamic sound. Night mode decreases the volume of loud sounds and increases volume of sounds such as speech. Applicable to Dolby Digital encoded DVD discs only. Parental control settings Password and Ratings 1 Press (Home). 2 Select [Setup] and then press OK. 3 Select [Preferences] and then press OK. • [Password]: Set or change your password for parental control access. If you do not have a password or have forgotten your password, enter 000000. • [Parental Control]: Enable maturity- based restricted access for playback of DVD-video that are recorded with ratings. To play discs irrespective of the rating, select [8 Adult]. Lock disc 1 Press (Home). 2 Select [Setup] and then press OK. 3 Select [General] and then press OK. • [Disc Lock]: Lock the disc to restrict play. You can lock up to 20 discs on your home theater. Note ••To play a locked disc, follow the onscreen instructions to enter the password, and then press OK. Display settings 1 Press (Home). 2 Select [Setup] and then press OK. 3 Select [Preferences] and then press OK. • [PBC]: Enable or disable the content menu navigation of VCD and SVCD discs with Play Back Control feature. Energy saving settings 1 Press (Home). 2 Select [Setup] and then press OK. 3 Select [General] and then press OK. • [Display Dim]: Set the brightness of the home theater front panel display. • [Sleep Timer]: Switch the home theater to standby mode after the elapsed time. • [Auto Standby]: Switch the home theater to standby mode after 25 minutes of no activity when in disc or USB mode. EN Restore default settings 1 Press (Home). 2 Select [Setup] and then press OK. 3 Select [Preferences] > [Default], and then press OK. 4 Follow the onscreen message to restore default setting. »»Your home theater is reset to its default settings, except for password, parental control and disc lock settings. EN 6 Update software Philips continually tries to improve its products. To get the best features and support, update your home theater with the latest software. Compare the version of your current software with the latest version on support. If the current version is lower than the latest version available on the Philips support website, upgrade your home theater with the latest software. Caution ••Do not install a lower version of software than the current version installed on your product. Philips is not liable for problems caused due to software downgrade. Check software version Check the version of the current software installed on your home theater. 1 Press (Home). 2 Select [Setup] and then press OK. 3 Select [Preferences] > [Version Info]. »»The software version is displayed. Update software through USB What you need • A USB flash drive that is FAT or NTFS- formatted, with at least 75MB of ...
Эта инструкция также подходит к моделям:Домашние кинотеатры - HTD5570/12 (398.11 kb)
Домашние кинотеатры - HTD5510/12 (398.11 kb)