Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
It ensures a perfect recording of the source material, meaning a true “bit for bit” recording. DLR will not be active, when ALC is used or when the record level is adjusted. 20 Auto Level Control (ALC) Auto Level Control ensures that the tracks on the recorded disc have a similar volume level. Always the already recorded tracks of the CDR(W) disc will be taken as reference for the volume level of the following recordings. Auto level control becomes automatically active, when: – COMPILE CD is being used, – a disc, a track or a track edit is being high speed recorded and the CDR(W) has recordings on it, or – a program (consisting from more than one disc) from the CD changer is being high speed recorded. Auto level control will not become active, when: – using COPY CD, – making recordings from an external source, or – making normal recordings in listen mode. Switching ALC permanently off 1 If necessar y press STOP 9 to stop playback. 2 Press CDR to select the CD recorder. 3 Press REC LEVEL to select: . ALC Off : ALC is permanently switched off. 0 To enable ALC press REC LEVEL again to select: . ALC On : ALC is enabled. Adjusting the record level You can adjust the reference record level for both digital and analog recordings from the internal changer as well as from external sources. This is also possible when ALC is active.This feature can also be used for fading your recordings in or out. 1 Select the recording source with CD1, CD2 or CD3 for internal recording or with AUX for external recording. 2 Press REC LEVEL on the set to enable the . EASY JOG ™ control to adjust the record level. 3 Rotate the . EASY JOG ™ control to the left to adjust the desired record level. . The actual record level (in dB) will be displayed. Notes: The record level from the internal changer can only be adjusted during recording. The loudest sounds on the source should not reach 0 dB maximum (first red level). Selecting the recording speed 1 Press SPEED several times to select the required recording speed: 1x (normal speed), 2x (double speed) or 4x (4 times normal speed). Notes: If recording is not successfull, you may need to select a lower speed. The recording speed cannot be changed during recording. Recording a single track Recording a single track during playback 1 Make sure the CDR(W) is absolutely free of scratches and dust particles and insert it into the CD recorder tray. 2 Play your desired track on the CD changer. 3 Press RECORD on the set to enter the recording menu. . Rec Tr and the tracknumber are displayed. 4 Press either: YES to start recording, . The arrow lights, RECORD IN PROGRESS is shown, playback and recording start from the beginning of the selected track and the actual recording time left starts to count down. or NO to continue playback. Do not forget to finalize! Recording an entire CD High speed recording and automatic finalizing of the current disc 1 Make sure the CDR(W) is absolutely free of scratches and dust particles and insert it into the CD recorder tray. 2 Select the required disc by pressing CD1, CD2 or CD3. 3 Press COPY CD to enter into the record mode. . The arrow and the YES key start blinking.The remaining recording time of the CDR(W), the total playing time of the source CD and Record CD1 (or 2, 3) ? are displayed. 4 Press YES to start recording and finalizing. . The arrow lights, RECORD IN PROGRESS and FINALIZE are shown, high speed recording and finalizing start and the actual recording time left starts to count down. Note: If a program was already available before pressing COPY CD, this will be ignored. PROGRAM goes off and the current disc will be recorded. After finishing the recording, PROGRAM is shown and the program is available again. Do not forget to finalize! Internal recording 21 English xp CDR 820/17 eng. 30-08-2001 10:43 Pagina 21 xp CDR 820/17 eng. 30-08-2001 10:43 Pagina 22 Internal recording Recording a program Further recording possibilities English High speed recording and automatic finalizing (optional) of the current program 1 Make sure the CDR(W) is absolutely free of scratches and dust par ticles and inser t it into the CD recorder tray. 2 Select and store all desired tracks in the CD changer memor y (see “Programming track numbers”). 3 Press COMPILE CD to enter into the record mode. . The arrow star ts blinking. The remaining recording time of the CDR(W), the total playing time of the program and Rec Prog ? are displayed. Note: If no program is available and you press COMPILE CD, you enter immediately into the program menu. Start programming and return to the record mode by pressing PROGRAM or COMPILE CD. 4 Press either : NO to change the program. . program star ts blinking. Now you can change the program (see “Programming”) and return to the record mode by pressing COMPILE CD. or YES to confirm recording. . Auto Final ? is displayed. 5 Press either : YES, if the CDR(W) is to be finalized after recording, or NO, if the CDR(W) is not to be finalized after recording. . T...