Оценок - 0, средний балл: 0 ( )

Производитель: Philips Размер: 1.41 mb Название файла: Язык инструкции:

MENU GUIDE ..............TUNER: Switches the receiver menu on and off. DVD, TV: Switches the DVD/TV menu on and off. OK .................................Confirms menu options. Arrow buttons ..............TUNER: Moves in the menus. Right/left arrows are tuning up/down. CD, CDR: Left/right arrows are searching backwards/forwards, up/down arrows are selecting the next/previous track. +A...........................Increases the receiver volume. -A...........................Decreases the receiver volume. i NEWS/TA.................TUNER: Without function. TV: Switches teletext on and off. SAT: Switches the information text on and off. EATV ......................Increases the TV volume. CD, CDR, VCR, DVD: Starts playback. CATV ......................Decreases the TV volume. CD, CDR, VCR, DVD: Stops playback. i CHANNEL/TRACK ...Selects the previous preset tuner station. VCR: Rewinds the tape. CD, CDR, DVD: Selects the previous track. TV: Selects the previous channel. e CHANNEL/TRACK ...Selects the next preset tuner station. VCR: Fast forwards the tape. CD, CDR, DVD: Selects the next track. TV: Selects the next channel. LOUDNESS ...................Switches LOUDNESS on and off. ±SOUND ....................Scrolls through the different smart sounds (FR 965, FR 968 only). SUBW. ON/OFF ............Switches the subwoofer on and off (FR 975 only). REC, DVD AUDIO ..........CDR, VCR: Starts recording. DVD: Switches audio tracks. CANCEL, DVD ...........CD, CDR, SAT, VCR: Clears a program, cancels selections. DVD: Switches the view angle. FR.D., DVD A .............TUNER: Switches to FREQUENCY DIRECT. CD, CDR, VCR, DVD: Pauses playback. INDEX, DVD T-C............VCR: Switches the index search on and off. SAT: Switches the themes on and off. DVD: Switches between title and chapter. DISC ..............................CD-, CDR-, DVD-Changers: Switches to the next disc. NIGHT ...........................Switches NIGHT MODE on and off. 3D SURR. ......................Switches virtual 3D surround on and off (FR 965, FR 968). VIRTUAL MODE ............Scrolls through the different virtual surround sound modes (FR 975 only). SURROUND ON/OFF ....Switches SURROUND SOUND on and off. +/-SUBWOOFER...Increases/decreases the subwoofer volume. +/-REAR ...............Increases/decreases the volume of the rear speakers. While test tone is on, the volume of the speakers you are hearing can be increased/decreased with these buttons. SURROUND MODE.......Scrolls through the different surround modes. TEST TONE ...................Switches the test tone on and off. While test tone is on, the volume of the speakers you are hearing can be increased/decreased with +/-REAR. 8 REMOTE CONTROL Programming the universal remote control You can identify the universal remote control by the inscription Multibrand/Universal. The universal remote control must be programmed to use the codes for your appliances of different brands. This is done by keying in a 4-digit code or by scanning the codes until the correct one is found. We recommend to using the 4-digit code. This method is faster and more reliable. The code scanning method should be used only if you cannot find the code for one of your appliances. The codes are listed at the end of this book. Important! Use the remote control buttons for programming, not the buttons of the receiver or other appliances. Programming with the 4-digit code 1 Keep the source button for the appliance which should be controlled and2 pressed for 3 seconds. 2 Key in the 4-digit code for the appliance (codetable at the end of the booklet). Notes: – If more than 4 digits are entered, the remote control will recognize only the ones keyed in first. – If you do not key in a code within 30 seconds the remote control will switch off the programming function without changing the code. – To program a new appliance, simply overwrite the old code by entering a new one. Scanning the codetable 1 Switch on the appliance which should be controlled. 2 Keep the source button for the appliance which should be controlled and2 pressed for 3 seconds. 3 Press and release 2 again. yThe remote control sends the codes for channel up or standby (depending on the selected source) for one brand after the other. 4 As soon as the appliance reacts – switches to the next channel or to standby – press 2 to confirm the code. yThe identified code will be used. • If the set does not react within 2 minutes, the code for this appliance is not stored in the remote control. The code of the remote control will remain unchanged. Note: When taking out the batteries of the remote control for more than 1 minute the codes must be reprogrammed. Once you have found and tested the codes for your various appliances, you may want to write them down here. PHONO .......................................... TUNER ........................................... CD ................................................. CDR/TAPE ..................................... TV ........................................

Скачать инструкцию

Чтобы скачать, введите 2 цифры: