Оценок - 5, средний балл: 4
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
You can also set the Test Tone in this mode. Setting up the Speaker Delay Time When 5.1CH Surround Sound is played, you can enjoy the best sound if the distance between you and each speaker is the same. Since the sounds arrive at the listening position at different times depending on the placement of speakers, you can adjust this difference by adding a delay effect to the Center and Surround Speakers. tinns Delay Time Front ¡Center : 00ms | Surround : 00ms Subwoofer Test Tone : Off < ►Change " Select ' Return Audio | Front Bal. Center Level Surround Level SW Level SdB^ 0dB 0dB 0dB R 0dB Surround Bal. ^ NOTE ■ The Delay Time menu will be activated only when a 5.1 channel source is played. ■ You can not set Center and Surround in this mode when their Speaker Size is set to NONE. Press the buttons to select and adjust the desired speaker. Press the _ + buttons to adjust the settings. English 21 03 Setup Setup Ideal Center Test Tone Df: The distance from Front Speaker Dc: The distance from Center Speaker Ds: The distance from Surround Speaker Setting the Center Speaker If the distance of Dc is equal to or longer than the distance of Df in the figure, set the mode as 0ms. Otherwise, change the setting according to the table. Distance between Df and Dc 0.00m 0.34m 0.68m 1.06m 1.40m 1.76m Delay Time 00 ms 01 ms 02 ms 03 ms 04 ms 05 ms Setting the Surround Speaker If the distance of Dc is equal to or longer than the distance of Ds in the figure, set the mode as 0ms. Otherwise, change the setting according to the table. Distance between Ds and Dc 0.00m 1.06m 2.11m 3.16m 3.62m 5.29m Delay Time 00 ms 03 ms 06 ms 09 ms 12 ms 15 ms Speaker Setting Speaker Size Sound Edit Delay Time | | Test Tone : On ► | Use the Test Tone feature to check the speaker connections. • Press the _ + buttons to select On. • The test tone will be sent to Front Left ^ Center ^ Front Right ^ Surround Right ^ Surround Left ^ Subwoofer in order To stop the test tone, press the ENTER button. DRC (Dynamic Range Compression) This feature balances the range between the loudest and quietest sounds. You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night. • You can select either Full, 6/8, 4/8, 2/8, off. AUDIO SYNC Video and audio sync may not match with digital TV If this occurs, adjust the audio delay time to match the video • You can set the audio delay time between 0 ms and 300 ms. Set it to the optimal status. Return Return ^ NOTE ■ With □□ PL II (Dolby Pro Logic II), the delay time may be different for each mode. ■ With AC-3 , the delay time can be set between 00 and 15mSEC. ■ The Center channel is only adjustable on 5.1 channel discs. 22 English Speaker Selection The audio signals transmitted over the HDMI Cable can be changed Home Theater/TV Speaker, • Home Theater : Video is transmitted over the HDMI connection cable only, and audio is output through the product speakers only. • TV Speaker : Both video and audio signals are transmitted over the HDMI connection cable, and audio is output through your TV speakers only. ^ NOTE ■ The default setting of this function is Home Theater . ■ HDMI Audio is automatically down-mixed to 2ch for TV speakers. ■ When TV Selection is set to TV Speaker, PL II / DSP EQ/P.BASS/GIGA/S.VOL doesn't work. ■ With Speaker Selection set to 'TV Speaker', the volume can be adjusted only using the TV remote control. User EQ You can configure the equalizer settings manually to your preference. User EQ dB 6 250Hz 600Hz 1kHz 3kHz 6 kHz 10kHz 15kHz O Reset > Adjust < Move ' Return Audio Return Ch.(ARC) You can enjoy TV sound from the Home Cinema speakers by using just one HDMI cable. • Off : Turn the Audio Return Channel function off. • Auto : Listen to TV sound from the Home Cinema speakers if your TV is compatible with the Audio Return Channel function. ^ NOTE ■ When Anynet+ (HDMI-CEC) is Off, the Audio Return Channel function is not available. ■ Using an ARC (Audio Return Channel-uncertified HDMI cable may cause a problem in compatibility. ■ ARC function is only available if an ARC-compliant TV is connected. System Initial Settings By using the Initial Settings, you can set the language and TV aspect . ^ NOTE ■ If an HDMI cable is connected to the product, the TV aspect does not appear and it is set to 16:9 Wide automatically. DivX(R) Registration View DivX(R) VOD Registration Code to purchase and play DivX(R) VOD content. ^ NOTE ■ This option is not activated if you select OK.To activate this option, please activate the DivX(R) Deactivation. ■ Even after you reset the system, the settings of DivX Registration will not be reset. DivX(R) Deactivation Select this to get a new registration code. English 23 03 Setup Setup Language Change Password You can select the language you prefer for on-screen menu, disc m...
Эта инструкция также подходит к моделям:Домашние кинотеатры - HT-E355 (15.22 mb)