Оценок - 4, средний балл: 4.3
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
2 Connect the Digital Input (OPTICAL) to the Digital Output on the external digital component. 3Press AUX on the remote control to select ‘DIGITAL IN’. • Each time the button is pressed, the selection changes as follows: DIGITAL IN . AUX 1 . AUX 2. • You can also use the FUNCTION button on the main unit. The mode switches as follows: DVD/CD . DIGITAL IN . AUX1 . AUX2 . FM . AM. 15 CONNECTIONS L R VIDEO OUT Audio Cable If the external analog componenthas only one AudioOut, connect either left or right. The AC Cord must be plugged into an appropriate socket. Before plugging your system into an AC outlet, you must check the voltage. Check the position of the voltage selector on the rear of the system (OPTIONAL). 1. Plug the AC Cord on the rear of the system into an appropriate outlet. 2. Press the On/Standby button to switch your DVD Player system on. L R VIDEO OUT Audio Cable If the external analog componenthas only one AudioOut, connect either left or right. The AC Cord must be plugged into an appropriate socket. Before plugging your system into an AC outlet, you must check the voltage. Check the position of the voltage selector on the rear of the system (OPTIONAL). 1. Plug the AC Cord on the rear of the system into an appropriate outlet. 2. Press the On/Standby button to switch your DVD Player system on. 1 Connect Video Out on the DVD player to Video In on the TV. 2 Connect Video In on the DVD player to Video Out on the external analog component. 3 Connect Audio In on the DVD player to Audio Out on the external analog component. • Be sure to match connector colors. 4 Press AUX on the remote control to select AUX 1 or AUX 2. • Each time the button is pressed, the selection changes as follows: DIGITAL IN . AUX 1 . AUX 2. • You can also use the FUNCTION button on the main unit. The mode switches as follows: DVD/CD . DIGITAL IN . AUX1 . AUX2 . FM . AM. 16 Before Using Your DVD Player Your DVD player is capable of playing DVD, VCD, CD, MP3 and JPEG discs.Depending on the disc you are using, these instructions may vary slightly. Read the instructions carefully before using. Before Using Your DVD Player Your DVD player is capable of playing DVD, VCD, CD, MP3 and JPEG discs.Depending on the disc you are using, these instructions may vary slightly. Read the instructions carefully before using. 1 Plug the power cord into the AC power supply. 4 Press TV/VIDEO button to select VIDEO mode. Selecting the Video Format Turn off the main unit and then press NTSC/PAL. • By default, the video format is set to "PAL". • Each time the button is pressed, the video format switches between "NTSC" and "PAL". • Each country has a different video format standard. • For normal playback, the video format of the disc must be the same as the video format of your TV. 17 2 2 Press the MODE button so Press the POWER button to that the TV indicator on the 3 turn on the TV. remote control flashes. DVD RECEIVER TV 5 5 Press the MODE button so that Press DVD button to select the DVD RECEIVER indicator 6 DVD/CD mode. on the remote control flashes. TV DVD RECEIVER To Operate the TV and DVD Player with a Single Remote Control Press MODE button. • Each time the button is pressed, the TV indicator (red) and the DVD Receiver indicator (green) will flash alternately. • You can operate the TV while the TV indicator is flashing and the DVD player while the DVD indicator is flashing. • Buttons Enabled for TV Operation: POWER, CHANNEL, VOLUME, TV/VIDEO, and Numeric (0-9) buttons. • By default, the remote control is set to work with Samsung TVs. See page 64 for more information on the operation of the remote control. CONNECTIONS 18 Disc Playback • Depending on the content of the disc, the initial screen may appear different. • Depending on the recording mode, some MP3-CDs cannot be played. • Table of contents of a MP3-CD varies depending on the MP3 track format recorded on the disc. NoteChecking the Remaining Time Press the Remain button. DVD VCD CD • For checking the total and remaining time of a title or chapter being played. Each time the Remain button is pressed TITLE ELAPSED REMAIN : TOTAL VCDCD TRACK ELAPSED TITLE REMAIN TRACK REMAIN CHAPTER ELAPSED TOTAL ELAPSED CHAPTER REMAIN DVD 1 1 Press OPEN/CLOSE button to open the disc tray. 3 Press OPEN/CLOSE button to close the disc tray. DVD VCD CD • Playback starts automatically. MP3 JPEG • Playback starts automatically. • If the TV is on, a list of MP3s on the CD will appear on the TV screen. Something like you Back for good Love of my life More than words I need you My love Uptown girl DVD RECEIVER SMART NAVI 2 Load a disc. • Place a disc gently into the tray with the disc’s label facing up. To stop playback, press STOP during playback. • If pressed once, “PRESS PLAY” is displayed and the stop position will be stored in memory. If PLAY/PAUSE button or ENTER button is pressed, playback resumes from the stop position. (This function works only with DVDs.) • If pressed twice, “STOP” is displayed, and if PLAY...