Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
• [4:3 LETTER BOX] or [4:3 PAN SCAN]: This aspect ratio is for a 4:3 standard TV (page 58). 7 Press X/x to select the Control for HDMI setting, then press . HDMI SETUP HDMI RESOLUTION: AUDIO RETURN CHANNEL: AUTO(1920x1080p) OFF SD YCBCR/RGB(HDMI): JPEG RESOLUTION: AUDIO(HDMI): CONTROL FOR HDMI: ON ON OFF • [ON]: The Control for HDMI function is set to on. • [OFF]: The Control for HDMI function is set to off. To quit the Quick Setup Press DISPLAY in any Step. 29GB Getting Started Getting Started Depending on the connection of your TV (page 24), select the type of video output of the system. To select the type of video signal output from the HDMI OUT jack When you connect the unit and your TV with an HDMI cable, select the type of video signals output from the HDMI OUT jack. 1 Press FUNCTION repeatedly to select “DVD/CD.” 2 Press DISPLAY while the system is in stop mode. 3 Press X/x to select [SETUP], then press . CUSTOMCUSTOMQUICKCUSTOM 4 Press X/x to select [CUSTOM], then press . 5 Press X/x to select [HDMI SETUP], then press . HDMI SETUP AUDIO RETURN CHANNEL: AUTO YCBCR OFF SD YCBCR/RGB(HDMI): JPEG RESOLUTION: AUDIO(HDMI): CONTROL FOR HDMI: ON HDMI RESOLUTION: AUTO(1920x1080p) 6 Press X/x to select [HDMI RESOLUTION], then press . HDMI SETUP AUDIO RETURN CHANNEL: AUTO YCBCR OFF SD YCBCR/RGB(HDMI): JPEG RESOLUTION: AUDIO(HDMI): CONTROL FOR HDMI: ON HDMI RESOLUTION: AUTO(1920x1080p) 7 Press X/x to select the desired setting, then press . HDMI SETUP CONTROL FOR HDMI: AUDIO RETURN CHANNEL: YCBCR/RGB(HDMI): AUDIO(HDMI): JPEG RESOLUTION: SD HDMI RESOLUTION: AUTO(1920x1080p) 1280x720p 1920x1080i 720x480p AUTO(1920x1080p) • [AUTO (1920 . 1080p)]: The system outputs the optimal video signal for the connected TV. • [1920 . 1080i]: The system outputs 1920 . 1080i* video signals. • [1280 . 720p]: The system outputs 1280 . 720p* video signals. • [720 . 480p]**: The system outputs 720 . 480p* video signals. * i: interlace, p: progressive ** Depending on the area, [720 . 480/576p] may appear and the system may output 720 . 576p video signals. 30GB To select the type of video signal 6 Press X/x to select [PROGRESSIVE To select the type of video signal 6 Press X/x to select [PROGRESSIVE DZ940K only) When you connect the unit and your TV with a component video cable, select the type of video signals output from the COMPONENT VIDEO OUT jacks. 1 Press FUNCTION repeatedly to select “DVD/CD.” 2 Press DISPLAY while the system is in stop mode. 3 Press X/x to select [SETUP], then press . 4 Press X/x to select [CUSTOM], then press . 5 Press X/x to select [VIDEO SETUP], then press . CUSTOM CUSTOM QUICK CUSTOM VIDEO SETUP PROGRESSIVE (COMPONENT OUT): TV TYPE: 4:3 OUTPUT: COLOR SYSTEM (VIDEO CD): PAUSE MODE: 16:9 OFF FULL AUTO AUTO (COMPONENT OUT)], then press . VIDEO SETUP TV TYPE: 4:3 OUTPUT: COLOR SYSTEM (VIDEO CD): PAUSE MODE: PROGRESSIVE (COMPONENT OUT): 16:9 FULL AUTO AUTO OFF 7 Press X/x to select the desired setting, then press . VIDEO SETUP TV TYPE: 4:3 OUTPUT: COLOR SYSTEM (VIDEO CD): PAUSE MODE: PROGRESSIVE (COMPONENT OUT): 16:9 AUTO AUTO ON OFF •[OFF]: The system does not output progressive signals. Select this setting when: – your TV does not accept progressive signals, or, – your TV is connected via jacks other than the COMPONENT VIDEO OUT jacks. • [ON]: The system outputs progressive signals. Select this setting when: – your TV accepts progressive signals, and, – your TV is connected via the COMPONENT VIDEO OUT jacks. When you select [ON], the confirmation display appears. Follow the Steps below. 8 Press C/c to select [START], then press . The system outputs a progressive signal for about 5 seconds. Check that the screen is displayed correctly. 9 Press C/c to select [YES], then press . The system outputs a progressive signal. When you select [NO], the system does not output a progressive signal. 31GB Getting Started Playback Playback Press VOLUME +/– to adjust the volume. Playing a Disc Playing Files on a Disc/ USB Device Z Z FUNCTION "/1 FUNCTION MEMORY SELECT PICTURE NAVI VOLUME +/– C/X/x/c, DVD MENU VOLUME +/– H O RETURN DISPLAY H 1 Press FUNCTION repeatedly to select x “DVD/CD.” The selected item appears in the front panel display. 1 Press FUNCTION repeatedly to select the source you want to play. 2 Press Z to open the disc tray. The selected item appears in the front panel 3 Place a disc on the tray, then press Z. display. • “DVD/CD”: For a disc. • “USB”: For a USB device. With the label side up 4 Press N to start playback. 32GB 2 2 x For a disc Place a disc on the tray by pressing Z to open/close the disc tray. x For a USB device Connect a USB device to the (USB) port. USB device Note • It may take about 10 seconds before “READING” appears in the front panel display depending on the type of USB device. [FOLDER LIST] appears on the TV screen. If [FOLDER LIST] does not appear, press DVD MENU. 3 Press X/x to select a folder. FOLDER LIST 01 Let's Talk About Love (1985) 02 1st Album (1986) 03 In the Middle of Nowhere (1...