|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Set the ID of the S-AIR receiver to match the ID of the S-AIR main unit. • When you pair the S-AIR main unit and another S-AIR sub unit, such as a surround amplifier, you also need to pair the S-AIR main unit and the S-AIR receiver. For details, see “Pairing the S-AIR main unit with a specific S-AIR sub unit (Pairing operation)” (page 53). 2 Press AMP MENU. “LEVEL” appears on the display. 3 Press V/V repeatedly until “S-AIR SET” appears, then press © or b. 4 Press V/V repeatedly until “S-AIR MODE” appears, then press © or b. 5 Press V/V repeatedly until the setting you want appears, then press ©. • PARTY: The S-AIR sub unit outputs sound according to function set on the S-AIR main unit. • SEPARATE: You can select the input you want for the S-AIR receiver while the input of the S-AIR main unit remain unchanged. When “SEPARATE” is set, the functions you can select are “MAIN UNIT”, “SA-CD/CD”, “DMPORT”, “TUNER FM” and “TUNER AM”. To enjoy the same function as the S-AIR main unit, select “MAIN UNIT”. continued 55fiB S-AIR Operations 6 Select the desired function on the S-AIR product. When the sound is other than 2 channel stereo, multi channel sound is downmixed to 2 channel. 7 Adjust the volume on the S-AIR receiver. Note When “TUNER FM” or “TUNER AM” is selected on the system, you can only select the same band for the tuner on the S-AIR product. To control the system from the S-AIR receiver You can control the system from the S-AIR receiver by using the following buttons. Press Operation ►, II, ■, Share the same operations on the ./> remote S-AIR CH Change the function of the S-AIR main unit For details, refer to the operating instructions of the S-AIR receiver. Stabilizing S-AIR reception Read the following when S-AIR reception is poor or unstable. When S-AIR reception is poor Check the following. • Keep cords that are connected to the S-AIR product (AC power cord (mains lead), speaker cords, or other cords) away from the wireless adapter and slot. 56GB Keep as much space as possible around S-AIR products. -Avoid placing S-AIR products on top of or directly below other electronic equipment. -Avoid placing S-AIR products in a closed rack, metal rack or under a table. o Adjust the location (height, orientation, and place in the room) of S-AIR products until reception is the most stable. Place so that the wireless adapters of the S-AIR main unit and sub unit are closer. -Place so that S-AIR products are separated from other wireless devices. -Place so that S-AIR products are separated from metal doors or tables. If you still cannot improve S-AIR reception, change the “RF CHANGE” setting (page 58). »))((« 57 GB S-AIR Operations Changing the channel for better sound transmission If you use multiple wireless systems which sharing the 2.4 GHz band, such as wireless LAN or Bluetooth, the transmission of S-AIR products or other wireless systems may be unstable. In this case, the transmission may be improved by changing the following “RF CHANGE” setting. 1 Press AMP MENU. “LEVEL” appears on the display. 2 Press V/V repeatedly until “S-AIR SET” appears, then press © or b. 3 Press V/V repeatedly until “RF CHANGE” appears, then press © or b. 4 Press V/V repeatedly until the setting you want appears, then press ©. • RF AUTO: Normally select this. The system change “RF CHANGE” to “RF ON” or “RF OFF” automatically. • RF ON: The system transmits sound by searching the better channel for transmitting. • RF OFF: The system transmits sound by fixing the channel for transmitting. 5 Press AMP MENU. The AMP MENU turns off. Notes • When the wireless transmitter is not inserted in the S-AIR main unit, you cannot set “RF CHANGE”. • In most cases, you will not need to change this setting. • If “RF CHANGE” is set to “RF OFF,” transmission between the S-AIR main unit and S-AIR sub unit can be performed using one of the following channels. - S-AIR ID A: equivalent channel for IEEE 802.11b/g channel 1 - S-AIR ID B: equivalent channel for IEEE 802.11b/g channel 6 - S-AIR ID C: equivalent channel for IEEE 802.11b/g channel 11 • The transmission may be improved by changing the transmission channel (frequency) of the other wireless system(s). For details, refer to the operating instructions of the other wireless system(s). 58GB Enjoying the S-AIR receiver while the S-AIR main unit is in standby mode (For the S-AIR receiver only (not supplied)) You can enjoy the S-AIR receiver while the S-AIR main unit is in standby mode by setting “S-AIR STBY” to “STBY ON”. Note The POWER/ACTIVE STANDBY indicator in the S-AIR main unit (this subwoofer) will lights up in amber. 1 Press AMP MENU. “LEVEL” appears on the display. 2 Press V/V repeatedly until “S-AIR SET” appears, then press © or b. 3 Press V/V repeatedly until “S-AIR STBY” appears, then press © or b. 4 Press V/V repeatedly until the setting you want appears, then press ©. • STBY OFF: You cannot enjoy the S-AIR receive...
Домашние кинотеатры - HT-AS5 (3.69 mb)