Оценок - 4, средний балл: 4
(
)
)
|
К этому устройству также есть другие инструкции:
Домашние кинотеатры - DAV-DZ330 (3.41 mb)
Домашние кинотеатры - DAV-DZ330 (4.45 mb)
Домашние кинотеатры - DAV-DZ330 (3.45 mb)
Фрагмент инструкции
• Place the S-AIR main unit and S-AIR sub unit closer together. • Avoid use of equipment that generates electromagnetic energy, such as a microwave oven. • Place the S-AIR main unit and S-AIR sub unit away from other wireless devices. • See “If wireless transmission is unstable” (page 56). • Change the S-AIR ID settings of the S-AIR main unit and S-AIR sub unit. • Turn off the system and S-AIR sub unit, then turn them on. The S-AIR function on the • Check that the wireless transceiver is inserted into the unit correctly (page 53). system menu cannot be operated. 75GB Control for HDMI Control for HDMI The Control for HDMI function does not work. • Set [CONTROL FOR HDMI] in [HDMI SETUP] to [ON] (page 64). • Make sure that the connected component is compatible with the [CONTROL FOR HDMI] function. • Check the connected component’s setting for the Control for HDMI function. Refer to the operating instructions of the component. • If you change the HDMI connection, connect and disconnect the AC power cord (mains lead), or have a power failure, set [CONTROL FOR HDMI] in [HDMI SETUP] to [OFF], then set to [ON] (page 64). • For details, see “Using the Control for HDMI Function for “BRAVIA” Sync” (page 51). No sound is output from the • Make sure that the connected TV is compatible with the System Audio Control system and TV while using the function. System Audio Control function. • For details, see “Using the Control for HDMI Function for “BRAVIA” Sync” (page 51). Your TV’s input select does not • Set [CONTROL FOR HDMI] in [HDMI SETUP] to [OFF] (page 64). change automatically when you connect the system and TV with a SCART (EURO AV) cable. Messages Symptom Problems and solutions “PROTECTOR” and “PUSH •Press "/1 to turn off the system, and check the following items after POWER” appear alternately. “STANDBY” disappears. – Are the + and – speaker cords short-circuited? – Is anything blocking the ventilation holes of the system? – After checking the above items and fixing any problems, turn on the system. If the cause of the problem cannot be found even after checking all the above items, consult your nearest Sony dealer. “OVERLOAD,” “REMOVE • A problem has been detected with the level of electrical current from the USB,” then “PUSH POWER” (USB) port. Turn off the system and remove the USB device from the appear. (USB) port. Make sure there is no problem with the USB device. If this display pattern persists, contact your nearest Sony dealer. “LOCKED” appears and a disc • Contact your Sony dealer or local authorized Sony service facility. cannot be ejected. “DATA ERROR” appears. • The file you want to play is broken. • The file format does not match the extension of the file name. See “Playable Discs/Files on a USB Device” (page 6). • The JPEG image file format does not conform to DCF. “READING” is displayed for a • The reading process can take a long time if: long time while playing. – there are many folders or files on the USB device. – the folder or file organization structure is very complex. – the memory capacity is very large. – the internal memory is fragmented. 76GB Self-diagnosis Function Self-diagnosis Function When the self-diagnosis function is activated to prevent the system from malfunctioning, a 5character service number (e.g., C 13 50) with a combination of a letter and 4 digits appears on the TV screen or front panel display. In this case, check the following table. C:13:50 First 3 Cause and/or corrective action characters of the service number C 13 The disc is dirty. ,Clean the disc with a soft cloth (page 70). E XX To prevent a malfunction, the (XX is a system has performed the self- number) diagnosis function. ,Contact your nearest Sony dealer or local authorized Sony service facility and give the 5character service number. Example: E 61 10 When the version number appears on the TV screen When you turn on the system, the version number [VER.X.XX] (X is a number) may appear on the TV screen. Although this is not a malfunction and for Sony service use only, normal system operation will not be possible. Turn off the system, and then turn on the system again to operate. VER.X.XX Specifications Amplifier Section POWER OUTPUT (rated): FrontL + Front R 108 W+ 108W (at3 ohms, 1 kHz, 1% THD) POWER OUTPUT (reference): Front L/Front R/Center/ Surround L/Surround R: 167 watts (per channel at 3 ohms, 1 kHz) Subwoofer: 165 watts (at 3 ohms, 80 Hz) Inputs (Analog) TV (AUDIO IN) Sensitivity: 450/250 mV AUDIO IN Sensitivity: 250/125 mV Inputs (Digital) TV (Audio Return Channel/OPTICAL IN) Input Stream: Dolby Digital 5.1ch/DTS 5.1ch/ Linear PCM 2ch (Sampling Frequency: less than 48 kHz) Super Audio CD/DVD System Laser Diode Properties Emission Duration: Continuous Laser Output: Less than 44.6 .W * This output is the value measurement at a distance of 200 mm from the objective lens surface on the Optical Pick-up Block with 7 mm aperture. Signal format system PAL/NTSC USB Section (USB) port: Maximum current: 500 mA Tuner...
Эта инструкция также подходит к моделям:Домашние кинотеатры - DAV-DZ730 (1.14 mb)