Оценок - 3, средний балл: 3.3
(
)
)
|
К этому устройству также есть другие инструкции:
Домашние кинотеатры - HT-DDW780 (504.75 kb)
Домашние кинотеатры - HT-DDW780 (509.94 kb)
Домашние кинотеатры - HT-DDW780 (445.19 kb)
Фрагмент инструкции
1.0 m to DIST. 7.0 m DIST. 3.0 m [SL DIST.] (0.1 m step) Surround right speaker distancea) DIST. 1.0 m to DIST. 7.0 m DIST. 3.0 m [SR DIST.] (0.1 m step) Surround speaker positiona) SIDE/LO, SIDE/HI, BEHD/LO, SIDE/LO [SUR POS.] BEHD/HI Brightness of the displaya) 0% dim, 40% dim, 70% dim 0% dim [DIMMER] A. CAL (41) Auto calibration a) A.CAL YES, A.CAL NO A.CAL NO [7-A. CAL] [AUTO CAL.] a)For details, refer to the page in the parentheses. Amplifier Operations 35GB Adjusting the level (LEVEL menu) You can use the LEVEL menu to adjust the balance and level of each speaker. These settings are applied to all sound fields. Select “1-LEVEL” in the amplifier menus. For details on adjusting the parameters, see “Navigating through menus” (page 33) and “Overview of the menus” (page 34). LEVEL menu parameters x T. TONE (Test tone) Lets you adjust the speaker levels and balance while listening to the test tone from your listening position. For details, see “7: Adjusting the speaker levels and balance (TEST TONE)” (page 28). x FRT BAL (Front speaker balance) Lets you adjust the balance between front left and right speakers. x CNT LVL (Center speaker level) x SL LVL (Surround left speaker level) x SR LVL (Surround right speaker level) x SW LVL (Sub woofer level) x D. RANGE (Dynamic range compressor) Lets you compress the dynamic range of the sound track. This may be useful when you want to watch movies at low volumes late at night. Dynamic range compression is possible with Dolby Digital sources only. • COMP. OFF The dynamic range is not compressed. •COMP. STD The dynamic range is compressed as intended by the recording engineer. •COMP. MAX The dynamic range is compressed dramatically. Tip Dynamic range compressor lets you compress the dynamic range of the soundtrack based on the dynamic range information included in the Dolby Digital signal. “COMP. STD” is the standard setting, but it only enacts light compression. Therefore, we recommend using the “COMP. MAX” setting. This greatly compresses the dynamic range and lets you view movies late at night at low volumes. Unlike analog limiters, the levels are predetermined and provide a very natural compression. 36GB Adjusting the tone (TONE menu) You can use the TONE menu to adjust the tonal quality (bass/treble level) of the front speakers. These settings are applied to all sound fields. Select “2-TONE” in the amplifier menus. For details on adjusting the parameters, see “Navigating through menus” (page 33) and “Overview of the menus” (page 34). TONE menu parameters x BASS LVL (Front speaker bass level) x TRE LVL (Front speaker treble level) Settings for the surround sound (SUR menu) You can use the SUR menu to select the sound field you want for your listening pleasure. Select “3-SUR” in the amplifier menus. For details on adjusting the parameters, see “Navigating through menus” (page 33) and “Overview of the menus” (page 34). SUR menu parameters x S.F. SELCT (Sound field selection) Lets you select the sound field you want. For details, see “Enjoying Surround Sound” (page 42). Note The receiver lets you apply the last selected sound field to an input whenever it is selected (Sound Field Link). For example, if you select HALL for the SA-CD/CD input, then change to a different input and then return to SA-CD/CD, HALL will automatically be applied again. x EFFECT (Effect level) Lets you adjust the “presence” of the surround effect for sound fields selected with the MOVIE or MUSIC button and for “HP THEA” sound field. •EFCT. MIN The surround effect is minimum. •EFCT. STD The surround effect is standard. •EFCT. MAX The surround effect is maximum. Amplifier Operations 37GB Settings for the tuner (TUNER menu) You can use the TUNER menu to set the FM station receiving mode and to name preset stations. Select “4-TUNER” in the amplifier menus. For details on adjusting the parameters, see “Navigating through menus” (page 33) and “Overview of the menus” (page 34). TUNER menu parameters x FM MODE (FM station receiving mode) •FM AUTO This receiver will decode the signal as stereo signal when the radio station is broadcast in stereo. • FM MONO This receiver will decode the signal as mono signal regardless of the broadcast signal. x NAME IN (Naming preset stations) Lets you set the name of preset stations. For details, see “Naming preset stations” (page 50). Settings for the audio (AUDIO menu) You can use the AUDIO menu to make settings for the audio to suit your preference. Select “5-AUDIO” in the amplifier menus. For details on adjusting the parameters, see “Navigating through menus” (page 33) and “Overview of the menus” (page 34). AUDIO menu parameters x DEC. PRI. (Digital audio input decoding priority) Lets you specify the input mode for the digital signal input to the DIGITAL IN jacks. •DEC. AUTO Automatically switches the input mode between DTS, Dolby Digital or PCM. •DEC. PCM PCM signals are given priority (to prevent interruption when playback starts). However, when other signals are...