Оценок - 5, средний балл: 4.6
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
SC-BTT270 ^ Prepare the I speakers See below 2 Place the speakers See below 3 Connect the cables See over 4 Turn on the main unit See over Easy setup See Easy setup screen 1 Prepare the speakers STEP 1 Label each speaker cable by attaching the numbered sticker at the position indicated in the illustration. Be sure to match the number on each sticker with the circled number in the illustration. e.g., Front speaker Lch 'S7, ■=> WHITE speaker STEP 2 Connect the speaker cables. Insert the wire fully, taking care not to insert beyond the wire insulation. + : White —: Blue l ine White PUSH! Blue line Refer to the rear label of the speaker before connecting the corresponding cable. Verify the type of speaker with the label on the rear of the speaker. Speakers ® Front speakers FRONT/AVANT Centre speaker CENTER/CENTRE Surround speakers SURROUND/AMBIOPHONIE Subwoofer PURPLE Centre speaker Front speakers GREEN Rch RED Lch WHITE ßl e.g., Æ -® Surround speakers Rch Lch GREY BLUE 2 Place the speakers VQC8348 F0211SB0 I 3 Connect the cables It is possible to play back 3D videos and 3D still pictures by connecting this unit with a 3D compatible TV. For detailed information, refer to the operating instructions. Connect the cables by colour or by the numbers indicated in the illustration to the appropriate terminals on the rear panel of the unit. Adhesive tape PURPLE GREEN Main unit HDMI cable (not supplied) (Recommended for highest quality picture) If the HDMI terminal Is labeled "HDMI (ARC)”, you can enjoy TV sound and pictures with a single HDMI cable. If the HDMI terminal is not labeled “HDMI (ARC)”, an “Audio cable” or “Optical digital audio cable” is required to listen to sound from the TV. Optical digital audio cable (not supplied) Video cable*1 (supplied) Audio cable (not supplied) *1 Make sure that the video cable connection is made to view photos/videos from the iPod/iPhone. Audio connection For best quality audio, use the HDMI cable (with an ARC compatible TV) or an optical digital audio cable. If your TV does not support the above, use the audio cable. 4 Turn on the main unit Connect the AC mains lead Connect the AC mains lead to the main unit before connecting to the household mains socket. Before connecting the AC mains lead; Set the voltage at the bottom of the main unit. Main unit ГТ1 10-127V ^ E-22 110"127V—1 220-240V VOLT ADJ Use a flat-head screwdriver to move the voltage selector to the appropriate position for the area in which this system is used. AC Voltage selector AC mains lead (supplied) To a household mains socket Turn on the TV Turn on your TV and select the appropriate video input mode (e.g., VIDEO 1, AV 1, HDMI, etc.) to suit the connections to this unit. Turn on the main unit Press [(!)] to turn on the main unit. -®DOp| □ □□a □ □□□ □ Installing batteries in the remote control R6/LR6, AA Other connection Broadband Network Connections By conn...
Эта инструкция также подходит к моделям:Blu-Ray проигрыватели - SC-BTT270 (712.77 kb)