Оценок - 4, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
.4:3 Letterbox: Regular aspect television (4:3) Widescreen picture is shown in the letterbox style. .16:9: Widescreen television (16:9) Surround delay time Surround delay time TV Type Select to suit the type of television. .Standard (Direct View TV) .CRT Projector .LCD TV/Projector .Projection TV .Plasma TV Time Delay When connected with a Plasma display, adjust if you notice the audio is out of sync with the video. .0ms .20ms .40ms .60ms .80ms .100ms Still Mode Specify the type of picture shown when paused. .Automatic .Field: The picture is not blurred, but picture quality is lower. .Frame: Overall quality is high, but the picture may appear blurred. Black Level Control Change the black level of the picture if you connected a television through the COMPONENT VIDEO OUT terminals. .Lighter: When connected through VIDEO OUT or S-VIDEO OUT. .Darker: When connected through COMPONENT VIDEO OUT (Y/PB/PR). .“Audio” tab .“Display” tab .English .Francais .Espanol Menu Language .On .Off On-Screen Messages .“Others” tab Changing the player settings FL Dimmer Changes the brightness of the unit’s display (and Jog LED [HT930] [HT933]). .Bright .Dim ([HT930] [HT933] Jog LED turns off.) .Auto: The display is dimmed, but brightens when you perform some operations. ([HT930] [HT933] Jog LED turns on when you perform some operations.) QUICK SETUP .Yes .No Re-initialize Setting This returns all values in the Setup menus to the default settings. .Yes: The password screen is shown if “Ratings” (. page 26) is set. Please enter the same password. After “INIT” on the display disappears, turn the unit off and on again. .No Changing the delay time (Speaker Settings) a Center speaker b Surround speaker Difference (Approx.) Setting Difference (Approx.) Setting 30 cm (1 foot) 1.0 ms 150 cm (5 feet) 5.0 ms 60 cm (2 feet) 2.0 ms 300 cm (10 feet) 10.0 ms 90 cm (3 feet) 3.0 ms 450 cm (15 feet) 15.0 ms 120 cm (4 feet) 4.0 ms 150 cm (5 feet) 5.0 ms Dynamic Range Compression Speaker Settings (. below) Set the delay time for your center and surround speakers. .Off .On: Adjusts for clarity even when the volume is low by compressing the range of the lowest sound level and the highest sound level. Convenient for late night viewing. (Only works with Dolby Digital) .Center: 0.0/1.0/2.0/3.0/4.0/5.0 ms .Surround (L/R): 0.0/5.0/10.0/15.0 ms (Effective when playing multi-channel audio) (Center and surround speakers only) For optimum listening with 5.1-channel sound, all the speakers, except for the subwoofer, should be the same distance from the seating position. If you have to place the center or surround speakers closer to the seating position, adjust the delay time to make up for the difference. L LS RC SW RS C abc : Actual speakers position : Ideal speakers position abc : Primary listening distance Approximate room dimensions LS RS Circle of constant primary listening distance If either distance a or b is less than c, find the difference in the table and change to the recommended setting. 1 Press [3, 4] to select the delay time box and press [ENTER]. 2 Press [3, 4] to adjust the delay time and press [ENTER]. Center delay time Exit ms ms L Exit LS R SW C RS0.0 0.0 To finish the speaker setting Press [2] to select “Exit” and press [ENTER]. When you change the surround speaker setting for Dolby Digital, the setting also changes for Dolby Pro Logic II. e.g., the settings for MUSIC are the same as those for Dolby Digital. Dolby Digital Dolby Pro Logic II MUSIC MOVIE 0ms 0 ms 10 ms 5ms 5 ms 15 ms 10 ms 10 ms 20 ms 15 ms 15 ms 25 ms RQT7972 27 28 RQT7972 The radio The radio Up to 15 stations can be set in each band, FM and AM. 1 Press [INPUT SELECTOR] to select “FM” or “AM”. 2 Press [TUNE MODE] to select “MANUAL”. Each time you press the button: MANUAL()PRESET 3 Press [X TUNING W] to tune to the lowest frequency (FM: 87.9 or 87.5, AM: 520). 4 Press and hold [MEMORY]. Release the button when “FM AUTO” or “AM AUTO” is displayed. The tuner presets all the stations it can receive into the channels in ascending order. .“SET OK” is displayed when the stations are set, and the radio tunes to the last preset station. .“ERROR” is displayed when automatic presetting is unsuccessful. Preset the channels manually (. right). 1 Press [TUNER/BAND] to select “FM” or “AM”. 2 Press the numbered buttons to select the channel. Alternatively, press [W CH X]. To select a 2-digit number e.g. 12: [S10] . [1] . [2] When a stereo FM broadcast is being received. . If noise is excessive in FM Press [FM MODE] to display “MONO”. Press [FM MODE] again to cancel the mode. The mode is also canceled when you change the frequency. 1 Press [INPUT SELECTOR] to select “FM” or “AM”. 2 Press [TUNE MODE] to select “MANUAL”. 3 Press [X TUNING W] to select the frequency. Press and hold [X TUNING W] until the frequency starts scrolling to start automatic tuning. Tuning stops when a station is found. . Presetting the channel Up to 15 stations can be set in each band, FM and AM. 1 While listening to th...