Оценок - 4, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
Copyright 1995-2003 Adobe Systems, Inc. All Rights reserved. Macromedia, Flash, Macromedia Flash, and Macromedia Flash Lite are trademarks or registered trademarks of Adobe Systems, Inc. in the United States and other countries. Note For information about supported features, see the Release Notes for Cisco Digital Media System on Cisco.com. Glossary Cisco Digital Media System (Cisco DMS) is a family of products and technologies, including the ones that this guide describes. A Digital Media Player (DMP) is a compact, solid state, addressable network device that delivers digital signage content and enterprise TV content to a DMP display, which is any directly attached television screen or other kind of monitor or projector that shows media to an audience. The display might be analog or digital and might be standard-definition or high-definition. Digital Media Player Device Manager (DMPDM) is a web-based graphical user interface to configure one DMP during its initial setup, to manage one DMP in isolation, and to deliver your media to one DMP display. DMPDM is served from the DMP that it manages. System administrators, content managers, and graphic designers use a Digital Media Manager (DMM) software module called DMM-DSM to centrally manage their network of DMP devices, organize and bind assets together for signage, design layouts, and deliver media to DMP displays. Features of the separately licensed DMM-ETV software module help you to deliver VoDs and live television broadcasts over IP networks, configure an on-screen electronic program guide (EPG), manage subscriptions to EPG data provider services, and program the remote control for DMPs. Learn More To learn more about DMS products, related technologies, and Cisco in general: Description Go To DMS overview Release notes for Cisco DMS products User documentation for Cisco DMS products ps6681/prod_release_notes_list.html s6681/products_documentation_roadm aps_list.html FAQs and troubleshooting s6681/prod_troubleshooting_guides_lis t.html Cisco Academy of Digital Signage My Tech Support (registration required) d_my_tech_support.html Cisco Service Contract Center vices/resources/cscc/index.html Cisco Security Advisories roducts_security_advisories_listing.html 1 Checking the Package Contents The product package for one DMP 4305G should contain all of the following: • A proof of purchase certificate that contains important legal information, which you should keep. • This quick start guide and other product documentation. • One DMP 4305G. • Two signal cables: – HDMI – Composite/RCA • One AC adapter and four snap-on plugs. If anything is missing from the package or appears to be defective, contact the Cisco Technical Assistance Center (TAC). 2 Finding a Suitable Location to Set Up Your DMP The site where you set up a DMP must be within 6 feet of an AC electrical outlet (socket) that uses the standard voltage level for your locale, which must be within the range between 100V and 240V. To understand the supported lengths for different video cable types, see the “Connecting to a DMP Display” section on page 8. Environmental Tolerance Ranges The DMP 4305G is intended for indoor use. Temperature1 US Customary Unit Modern Metric Unit Min. Max. Min. Max. Operating— long-term or short-term 41°F 104°F 5°C 40°C Nonoperating or storage –4°F 140°F –20°C 60°C Relative Humidity2 Min. Max. Operating, nonoperating, and storage 20 percent 85 percent Altitude3 US Customary Unit Modern Metric Unit Min. Max. Min. Max. Operating, nonoperating, and storage 0 feet 13,780 feet 0 meters 4,200 meters 1. Ambient. 2. Noncondensing; ambient. 3. Above sea level. 3 Participating in a DHCP Network The factory default for a DMP 4305G is to obtain its IP address automatically from a DHCP server. If you will deploy your DMP at a physical location that does not have a DHCP server and you must configure your DMP to use a static IP address, complete the “Preconfiguring Your DMP To Run Without a Local DHCP Server” procedure in the user guide on Cisco.com for the version of DMPDM that you use: products/ps7220/products_user_guide_list.html. Tip If a network security policy restricts DHCP address assignments to network interface cards with known MAC addresses, read the sticker that is affixed to the bottom of your DMP chassis, then provide your security policy administrator with the MAC address. Step 1 Plug one end of an ordinary Ethernet cable into the Ethernet 10/100 port on the back of the DMP chassis. 7 Step 2 Plug the other end of the Ethernet cable into a network hub, network switch, or router that participates in a DHCP network. 4 Connecting to a DMP Display We recommend that you use a d...