Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
SUB-ZERO®is a registered trademark of Sub-Zero Freezer Company, Inc. As you follow these instructions, you will notice WARNING and CAUTION symbols. This blocked information is important for the safe and efficient installation of Sub-Zero equipment. There are two types of potential hazards that may occur during installation. signals a situation where minor injury or product damage may occur if you do not follow instructions. states a hazard that may cause serious injury or death if precautions are not followed. Another footnote we would like to identify is IMPORTANT NOTE: This highlights information that is especially relevant to a problem- free installation. SUB-ZERO MODEL 315W INSTALLATION AND OPERATION THANK YOU Congratulations on the purchase of your Sub-Zero Model 315W wine cooler. This unit is designed and manufactured in the Sub-Zero tradition of superior quality and reliability. The importance of the installation of the Model 315W wine cooler cannot be overemphasized. Installation should be done by a qualified installer. Before you begin the installation process, it is recommended that you read the entire installation instructions. There are key details that you should take special care to observe during the installation. By reading these instructions carefully, you will make the installation process easier, problem-free and, most importantly, safe. Any questions or problems about the installation should be directed to your Sub-Zero dealer or the Sub-Zero Customer Service Department at 800-222-7820. You can also visit our website at subzero.com. The Model 315W wine cooler is protected by a warranty that is one of the finest in the industry. Take a moment to read the warranty statement on page 19 and refer to it should service become necessary. The Operation information in this book will answer most of your questions about the features, operation and maintenance of your wine cooler. If you have questions that are not addressed here, call Sub-Zero Customer Service at 800-222-7820 or visit our website, subzero.com. CONTACT INFORMATION Sub-Zero Customer Service: 800-222-7820 Website: subzero.com SUB-ZERO MODEL 315W FEATURES WARRANTY Sub-Zero products are covered by a two, five and twelve year residential warranty (exclusions apply). See warranty details at the end of this guide. MODEL 315W FEATURES Undercounter wine cooler with 26 (750 ml) bottle capacity Overlay and stainless steel design options Ideal humidity and temperature range of 45°F (7°C) to 55°F (13°C). Sturdy, rustproof wire shelves accommodate standard 750 ml bottles, half-bottles, as well as magnums Roller-glide shelves faced with natural cherry wood have a three-quarter extension for easy access Full-view glass door with UV resistant glass protection High altitude glass door Discreet low voltage interior lighting UL approved for US and Canada Two, five and twelve year residential warranty – exclusions apply, see warranty at the end of this guide MODEL 315W Wine cooler Serial Number Plate Wine Bottle Shelves Intake Vents Discharge Vents Light Switch Kickplate Temperature Control SUB-ZERO MODEL 315W INSTALLATION INSTALLATION SPECIFICATIONS MODEL 315W DIMENSIONS Overall Width 151/8" (384) Overall Height 341/16" (865) Overall Depth – 315W/S 235/32" (588) Overall Depth – 315W/O 223/8" (568) Rough Opening Width 151/4" (387) Rough Opening Height 341/2" (876) Minimum Height Required (levelers in) 341/16" (865) Rough Opening Depth 24" (610) Dimensions may vary+_1/8" (3). OVERALL DIMENSIONS Stainless steel unit shown OVERALL DEPTH 235/32" (588) MODEL 315W/S 223/8" (568) MODEL 315W/O 341/16" (865) OVERALL HEIGHT " SIDE VIEWFRONT VIEW 151/8" (384) OVERALL WIDTH 247/8" (632) TO HANDLE MODEL 315W/S 151/8" (384) OVERALL WIDTH TOP VIEW 111/16" (281) 2" (51) 141/4" (362) 180° DOOR OPENING DOOR SWING 90° DOOR OPENING 120° 171/4" (438) Dimensions may vary+_1/8" (3). NOTE: Door swing not reversible. Dimensions in parentheses are in millimeters unless otherwise specified. SUB-ZERO MODEL 315W INSTALLATION INSTALLATION SPECIFICATIONS AREA REQUIREMENTS Before moving the unit into place, be sure that the rough opening dimensions, electrical location, and minimum door clearances are accurate. Refer to the illustration below. Also Refer to page 5 for overall dimensions. Be sure your electrician and cabinet installer have this information before finishing work is completed. IMPORTANT NOTE: Make sure the floor under the unit is level with the surrounding finished floor. IMPORTANT NOTE: For corner installations, door swing may be limited due to handle contact with the adjacent wall or cabinet face. You must allow a minimum of 2" (51) from the wall for a 90° door opening. This will ensure that the wine shelves can be fully extended. ROUGH OPENING DIMENSIONS 151/4" (387) ROUGH OPENING WIDTH Wine bottles are heavy. A fully loaded unit will weigh over 200 lbs (91 kg). Be sure the subflooring is adequate for the weight of both the unit and its contents. The Model 315W is int...