Оценок - 4, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
PARTS 1. Stainless steel veneered door with handle . Tinted double-pane window 3. LED display 4. Cabinet 5. Control panel 6. 3 removable chrome wine racks 7. Interior light control 8. Circulating fan USING YOUR WINE CELLAR Remove all packaging and any promotional labels or stickers from your wine cellar. Be sure that all parts (listed above) of your new wine cellar have been included before discarding any packaging materials. You may want to keep the box and packing materials for use at a later date. Before using your Cuisinart™ Private Reserve™ Wine Cellar for the first time, remove all protective paper and wrapping. Wipe housing and internal chamber with a damp cloth to remove any dust from the warehouse or shipping. 3 1 4 5 8 7 6 OPERATING INSTRUCTIONS 1. Place your wine cellar on a flat surface that is strong enough to support it when fully loaded. . Allow 3" (76mm) of space on both sides and rear of the wine cellar to allow proper ventilation. 3. This wine cellar is designed to be freestanding only, and should not be recessed or built in (fully recessed). 4. Do not place heavy objects on top of the unit. 5. Do not locate the unit in a moist place or display in direct sunlight. 6. Do not place the unit next to a major appliance that emits large amounts of heat, such as a dishwasher, microwave, toaster oven, oven or barbecue, etc. 7. Do not plug unit into the same outlet as a refrigerator or microwave. 8. The unit’s cooling system operates efficiently with an ambient temperature of less than 70°F ( 1°C). 9. Gently place/slide the racks in the wine cooler. 10. Determine the best setting to use: refer to the temperature guide for appropriate serving presets (see page 6). 11. Place bottles inside the cooler. 1 . Plug the power cord into a standard electrical outlet. Important: When using the wine cellar for the first time, allow at least 24 hours for the internal temperature to adjust properly. Make sure there are at least 3 to 5 bottles in the unit. ALWAYS REMOVE ALL BOTTLES BEFORE MOVING THE WINE CELLAR TEMPERATURE CONTROL Important note: In order to operate efficiently, thermoelectric products should be in an environment with an ambient temperature of less than 70°F (21°C). Setting the temperature control (presets): For your convenience, the Cuisinart™ Private Reserve™ Wine Cellar is programmed with eight presets, to accommodate any variety of wine. To change the preset temperature in the wine cooler, simply press the Preset button until the desired preset number (1 to 8) appears. The following section about storing wines (see page 6) will advise the optimal settings for your wine. MODE SELECTION PROCEDURE Default setting: Mode 1 1. Press Preset button. . Choose Mode Number (1-8) by pressing Preset button repeatedly. Selected mode number will blink for approximately 5 seconds. 3. LED display will show the corresponding preset temperature of the selected mode. It will remain on until the chosen mode is selected. Adjusting the temperature (manual setting) Default setting: 7°C (45°F) 1. Press Manual Set button. . Press (+) or (-) button to adjust the temperature. 3. Press Manual Set for confirmation. 4. Temperature on LED display will remain on until the chosen mode is selected. Choosing Fahrenheit or Celsius Default setting: °C 1. Press °C/°F button to select temperature unit. Controlling interior display light Default setting: Light is off when door is closed/light is on when door is open. 1. Press the Display Light button to keep display light on all the time. . Press the Display Light button to return to default setting . STORING WINES If you have a variety of white wines in the cabinet, Preset #5 is recommended. A variety of red wines should be set at Preset #6. STORING TEMPERATURE CHART Preset Wine tyPe 1 • Champagne/Sparkling wine • Fruit/dessert wine 2 • Light white (e.g., Riesling, Chablis, Sauvignon Blanc) 3 • Dry white (e.g., Chardonnay, Pinot Grigio) • Rose 4 • Light fruity red • Rose (e.g., Beaujolais, Rioja) 5 • Light fruity red • Light red (e.g., Beaujolais, Valpolicella) 6 • Light red (e.g., Chianti, Valpolicella) 7 • Medium red (e.g., Pinot Noir) 8 • Full-bodied red (e.g., Cabernet Sauvignon, Shiraz, Merlot, Bordeaux, Rhone) INTERIOR LIGHT CONTROL The interior display light option allows you to showcase your personal collection of wines. To activate this feature, press the display light switch. This switch is located on the control panel (see Parts, page 3). The interior light will remain on permanently while in this position. When in the Off position, the interior light will illuminate only when the door is opened. CLEANING AND CARE Always unplug the wine cooler before cleaning. Do not use benzene, scrubbing brushes or chemical cleaners, as these will damage the unit. Use only a mild, nonabrasive cleanser to clean the exterior of the cabinet. Clean the stainless steel door and handle by wiping with a damp cloth. Wash the inside surface with a warm water and baking soda solution. The soluti...