Оценок - 4, средний балл: 3.5 ( )

Производитель: Sony Размер: 3.92 mb Название файла: KDL40W4100.pdf Язык инструкции:

The diameter and length of the screws differ depending on the Wall-Mount Bracket model. Use of screws other than those supplied may result in internal damage to the TV set or cause it to fall, etc. 8-12 mm Screw (supplied with the Wall-Mount Bracket) Mounting Hook Rear of the TV set • Do not remove the Table-Top Stand of the KDL-52V4100 and KDL-52W4100 for any reason other than to wall-mount the TV. • Models KDL-32/37XBR6, KDL-40V4150, KDL-40/42/46V4100, KDL-40/46W4100 and KDL-46W4150 can be wall-mounted as packaged. If you decided to use the TV with the TV stand and later want to wall-mount the TV, follow the steps provided on this page to remove the Table-Top Stand. • Be sure to store the unused screws and Table-Top Stand in a safe place until you are ready to attach the Table-Top Stand. Keep the screws away from small children. Follow the simple steps below to remove the Table-Top Stand: 1 Unplug the AC power cord and disconnect all the cables from the TV. 2 Secure the Mounting Hook to the rear of the TV. 3 Adjust the angle of the Mounting Hook. 4 Remove the screws on the rear of the TV (see illustration in the next column). Do not remove any other screws from the TV. 5 When screws are removed, lift the TV off the stand. Make sure that you carry out this task with at least two or three people. Do not attempt to lift the TV by yourself. • Shown here is model KDL-52V4100; other models may only require removal of three screws (refer to the “Attaching the Table-Top Stand” flyer). Getting (Continued) 8 Make sure that your TV has adequate air circulation. Allow enough space around the TV as shown below. Avoid operating the TV at temperatures below 41 °F (5 °C). ~ • Inadequate air circulation can lead to overheating of the TV and may cause damage to your TV or cause a fire. Consider the following for best picture quality • Do not expose the screen to direct illumination or sunlight. • Use spot lighting directed down from the ceiling or cover the windows that face the screen with opaque drapery. • Install the TV in a room where the floor and walls are not of a reflective material. •When moving the TV from a cold area to a warm area, a sudden room temperature change may cause the TV’s picture to blur or show poor color due to moisture condensation. Should this occur, please wait a few hours to allow the moisture to evaporate before powering on the TV. You can bundle the connecting cables as illustrated below. When Installing the TV Against a Wall or Enclosed Area (30 cm) 11 7/8 inches (6 cm) inches 4 inches (10 cm) 4 inches (10 cm) 2 3/8 Leave at least this much space around the set. Installed with stand 11 7/8 inches 4 inches (10 cm) 4 inches (10 cm) 4 inches (10 cm) (30 cm) Installed on the wall Leave at least this much space around the set. Never install the TV set as follows: Air circulation is blocked. Air circulation is blocked. Wall Wall Bundling the Connecting Cables ~ • Do not bundle the AC power cord with other connecting cables. Securing the TV Sony strongly recommends taking measures to prevent the TV from toppling over. Unsecured TVs may topple and result in property damage, serious bodily injury or even death. Prevent the TV from Toppling Over s Secure the TV to a wall and/or stand. s Do not allow children to play or climb on furniture and TV sets. s Avoid placing or hanging items on the TV. s Never install the TV on: • slippery, unstable and/or uneven surfaces. • furniture that can easily be used as steps, such as a chest of drawers. s Install the TV where it cannot be pulled, pushed, or knocked over. s Route all AC power cords and connecting cables so that they are not accessible to curious children. Use a Sony TV Stand Use a Sony specified TV stand (see page 2) and follow the instruction manual provided with the Sony TV stand. If a Sony specified TV stand is not used, consider the following recommended measures. Recommended Measures to Secure the TV Secure the Stand for the TV Make sure the TV stand can adequately support the weight of the TV. Use two angle braces (not supplied) to secure the stand. For each angle brace use the appropriate hardware to: • attach one side of the angle brace to the wall stud. • attach the other side to the TV stand. Angle brace Stand Secure the TV to the Stand Use the optional hardware listed below (not supplied): •M6 . 12-18 mm anchor bolt (screwed into the TV’s Table-Top Stand) • A screw or similar (attach it to the TV stand) • Rope or chain (strong enough to support the weight of the TV). Make sure that there is no excess slack in the rope or chain. An alternative way to secure the TV is with an optional Sony Support Belt Kit. Getting Anchor bolt Screw Screw hole on the Table-Top Stand ~ Contact Sony Customer Support to obtain the optional Support Belt Kit by providing your TV model name. • For United States call: 1-800-488-7669 or visit: • For Canada call: 1-877-899-7669 Anchor the TV to the Wall Use the hardware listed below (not suppli...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: