Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
c. Rinse the parts in hot water. d. Sanitize the parts by soaking for one minute in the warm chlorine solution. e. Re-rinse the parts in hot water to remove all the chlorine solution. f. Reassemble the faucet and attach it to the dispenser. 7. Sanitizing the BIB connector, tubing and metering valve: This procedure requires a 1/2 gallon container of sanitizing solution, (100 ppm of chlorine at 100° F (38° C) water). a. Since the bag connector(s) have an internal shut off valve, it will be necessary to prop the valve open during cleaning. NOTE: Cutting off the mating connector of an empty concentrate bag works well for this. Keep this mating end for future cleanings of the system. b. Turn on water supply to the dispenser. c. Place open bag connector into the 1/2 gallon container of sanitizing solution. d. Place a large container under dispenser faucet. e. Open faucet until the chlorine mixture in the container is empty. f. Allow dispenser to sit overnight before flushing sanitizer out of the system. g. Flush system by filling a container with warm to hot tap water only (no chlorine) and opening the faucet - until all chlorine has been flushed from the system. 8. Remove the mating end of connector and attach dispenser’s connector to a Bag In a Box and dispense several cups to prime the concentrate line or until consistency of the product is correct. a b 34106.1 100506 5 TCD-1 TCD-2 6 REPLACEMENT PARTS (TCD-1) 56 57 59 58 57 43 .375" BIB Adapter Concentrate Bottle Tube 20 42 24 26 25 46 47 45 44 18 19 26 27 28 29 20 17 16 15 20 19 14 13 12 11 10 23 31 32 61 30 21 20 22 20 34 35 36 37 38 39 41 40 54 52 51 33 6 53 7 8 2 3 1 4 5 9 60 49 50 47 48 55 Early Models P3457.60 34106.1 021612 ITEM PART NO. QTY. DESCRIPTION * Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement. 7 REPLACEMENT PARTS (TCD-1) NOTE: Effective August 2006, the Venturi and product delivery tubing was changed from .25"ID to .375"ID to improve flow rate. If for first replacement, order Tube Replacement Kit P/N 39169.0000 (2 kits required for TCD-2) 1 23820.1000 1 Water Strainer Assy (Includes items 2 thru 4) 2 22249.0000 1 Cap, Water Strainer 3 23721.0000 1 Screen 4 23819.0000* 1 Housing (Order item 1) 5 00310.0006 1 Tube Assy, Strainer to Bulkhead 6 00459.0001 1 Fitting, Bulkhead 7 01532.0000 1 Lockwasher, Internal Tooth .438" 8 00463.0000 1 Nut, .438" - 20 9 37689.0000 1 Tube Assy, Bulkhead to Shut-off 10 32891.0001 1 Elbow, Male .25" FLR x .25" MPT 11 33113.0000 1 Valve, Ball .25" FPT x .25" FPT 12 32360.0001 1 Clamp, .613" ID 01315.0000 1 Screw, Truss Head #8-32 x .375" 00991.0000 1 Nut #8-32 13 37898.0000 1 Gauge, Pressure 14 37742.0001 1 Nipple, .25" MPT 15 00432.0001 1 Elbow, .125" NPT Male/Female 16 00430.0001 1 Adapter, .125" NPT Male/Female 17 21993.0002 1 Regulator, Water, Low Flow 18 37460.0000 1 Fitting, Barb Elbow .25" NPT 19 37720.0001* 2 Tube, Silicone .375" ID x 5.0" (Order item 64) 20 12422.0001 8 Clamp, Hose .59"/.66" 21 40071.0001 2 Valve, Check .375" Barb 22 37720.0004* 1 Tube, Silicone .375" ID x 1.75" (Order item 64) 23 37736.1000 1 Venturi Assy (.25" product delivery tubing)(Includes item 24,25, 27-29 & 32) 37736.1001 1 Venturi Assy (.375" product delivery tubing)(Includes item 24 thru 29 & 32) 38044.0000 2 Screw, Plastite #6 x .375" 24 43111.0000 1 Plate, Fitting Retainer 01360.0002 2 Screw, Plascrew #6 x .375" 25 32849.0001 2 O-ring 26 32631.1002 2 Fitting, Barb .375" 27 37487.1001 1 Venturi Mixer (Includes items 30 & 32) Early Models (continued) 34106.1 021612 REPLACEMENT PARTS (TCD-1) (continued) 56 57 59 58 57 43 .375" BIB Adapter Concentrate Bottle Tube 20 42 24 26 25 46 47 45 44 18 19 26 27 28 29 20 17 16 15 20 19 14 13 12 11 10 23 31 32 61 30 21 20 22 20 34 35 36 37 38 39 41 40 54 52 51 33 6 53 7 8 2 3 1 4 5 9 60 49 50 47 48 55 Early Models P3457.60 34106.1 021612 28 37691.0000 1 O-ring 29 37486.0000 1 Adjustment Screw, Venturi 30 32852.0000 1 O-ring 31 03093.0001 1 Wing Nut, Faucet 01268.0000 1 Chrome Nut, Faucet Union (Optional) 32 01221.0001 1 C-Ring, Faucet Shank 33 03260.0004 1 Faucet Assy, Black Plastic Body (Includes items 34 thru 40)(Refer to page 18 for important ordering information)(See item 67) 03260.0005 1 Faucet Assy, Chrome Body (Includes items 34 thru 41)(See item 67) 34 29163.0007 1 Handle, Faucet 35 29165.0002 1 Bonnet, Faucet 36 00601.0001 1 Spring Faucet 37 37715.0000 1 Collar, Spring (Refer to item 66) 38 29164.0000 1 Stem, Faucet 39 00600.0001 1 Seat Cup, Faucet (Refer to item 66) 40 35758.0002* 1 Faucet Body, Black Plastic (Order item 33) 35206.0000* 1 Faucet Body, Chrome (Order item 33) 41 38473.0000 1 Insert 42 - - - - - - - - 1 Tube, Silicone .25" ID x 36.0" (For first replacement, order item 59) 20976.0078* 1 Tube, Silicone .375" ID x 60.0" (Order item 64) 43 34093.0000 1 Lid, Reservoir 44 01592.0000 2 Bushing, 1.0" Dia 45 03043.0006 1 Decal, Iced Tea (See page 18 for proper placement) 46 38130.0000 1 Decal, Faucet Under Pressure 47 38278...
Эта инструкция также подходит к моделям:Диспенсеры - TCD-2 (1.28 mb)