Оценок - 4, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
It is recommended that, before installing a water treatment system, you have your water supply tested to determine your actual water treatment needs. This system has been tested according to NSF/ANSI 42 and 53 for the reduction of the substances listed below. The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for water leaving the system, as specified in NSF/ANSI 42/53. Model FM-15 Substance Influent Challenge Max. Permissible Product Reduction Minimum Average Concentration Water Concentration Requirements Reduction Reduction Standard 42 Aesthetic Effects Chlorine 2.0 mg/L±10% . 50% 97.5% Particulates Class I at least 10,000 . 85% 99.3% (0.5–<1.m) particles/mL Standard 53 Health Effects Cysts2 Minimum 50,000/L 99.95% 99.96% 99.99% Turbidity 11±1 NTU 0.5 NTU 98.5% 98.9% Lead (pH 6.5) 0.15 mg/L±10% 0.010 mg/L 99.3% 99.3% Lead (pH 8.5) 0.15 mg/L±10% 0.010 mg/L 99.3% 99.3% Lindane 0.002 mg/L±10% 0.0002 mg/L 97.6% 97.6% Atrazine 0.009 mg/L± 10% 0.003 mg/L 93.9% 94.9% Flow Rate=0.6 gpm (2.3 Lpm) Capacity=200 gallons (757 L) or 2 months 2 Based on the use of microspheres. Testing was performed under standard laboratory conditions, actual performance may vary. Test Conditions: Flow Rate: 0.6 gpm (2.3 Lpm) pH: 7.5±1 Inlet Pressure: 60 psi (4.1 bar) Temp: 50–77°F (10–25.C) Operating Requirements: Service Flow Rate: 0.6 gpm (2.3 Lpm) Rated Service Life: 200 gallons (757 liters) Pressure: 30–100 psi (2.1-6.9 bar) Temperature: 40–100°F (4.4–37.7°C) Suggested Retail Price for Replacement Filter: FM-15R: $12.99 NOTE: Price subject to change. Contact your local retailer or call 1-888-777-7962 for replacement cartridge pricing. IOWA RESIDENTS ONLY: Store or seller’s name Address City State Zip Telephone Seller’s signature Customer’s signature Date Avis important: Lisez ces donnees techniques et comparez les performances de cet appareil avec vos besoins reels de traitement d’eau. Avant d’installer votre appareil, nous vous conseillons de faire tester votre eau pour determiner les traitements dont vous avez besoin. Ce systeme a ete essaye selon les normes NSF/ANSI 42 et 53 pour la reduction de la teneur des substances ci-dessous. La concentration desdites substances dans l’eau entrant dans le systeme a ete reduite a une valeur inferieure ou egale aux limites permises pour l’eau sortant du systeme comme specifie aux normes NSF/ANSI 42 et 53. Modelo FM-15 Substance Concentration de Concentration Max. de la Reduction par Reduction Reduction la Teneur a l’entree Permis du produit d’essai les reglements Minimale Moyenne Norme 42 Affectant l’apparence Chlore 2,0 mg/L±10% . 50% 97,5% Particules en suspension au moins 10000 . 85% 99,5% (0,5 a <1.m) particules/ml Norme 53 Affectant la sante Parasites2) Minimum 50000/L 99,95% 99,96% 99,99% Turbidite 11 ±1 NTU 0,5 NTU 98,5% 98,9% Plomb (pH 6,5) 0,15 mg/L±10% 0,010 mg/L 99,3% 99,3% Plomb (pH 8,5) 0,15 mg/L±10% 0,010 mg/L 99,3% 99,3% Lindane 0,002 mg/L±10% 0,0002 mg/L 97,6% 97,6% Atrazine 0,009 mg/L± 10% 0,003 mg/L 93,9% 94,9% Debit = 2,3 L/min (0,6 gpm) Capacite = 757 L (200 gallons) ou 2 mois 2) Base sur l’utilisation de micro-spheres. Les essais ont ete effectues dans des conditions standards de laboratoire, il se peut que les performances reelles soient differentes. Conditions d’essai Debit: 0,6 gpm (2,3 Lpm) pH: 7,5 ± 1 Pression a l’entree: 60 psi (4,1 bar) Temperature: 50–77°F (10–25.C) Plages de fonctionnement Regimen durante servicio: 0,6 gpm (2,3 L/min) Margen de duracion: 200 galones (757 litros) Presion: 30–100 psi/ 2,1-6,9 bars Temperature: 40–100°F/4,4-37,7°C Prix de vente suggere pour les cartouches filtrantes de rechange: FM-15R: $12,99 NOTE: Les prix peuvent varie...