Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
Service Center. • Is the draining or feed hose bent or folded? Unfold the hose. Keep the length of the feed hose equal to • Is the feed hose too long? or shorter than 5 m. 26 Others TROUBLESHOOTING Symptom Check Measures to take The pH level is incorrect. • Do you live in an area where the water hardness is high? The pH is subject to the region and the quality of water. • Is the height of the domestic water outlet hose too high? Keep the height of the domestic water outlet hose equal to or lower than 25 cm from the bottom of the product. • Is the amount of draining water small? In this case, please contact the After- Service Center. All operations were stopped suddenly while operating. • Is the water being supplied actively? Check the water supply valve. • Is the power connected? Check if the power cord is plugged into a 120V~ 60Hz outlet. • Is water overflowing or leaking? In this case, please contact the After- Service Center. • In this case, please contact the After- Service Center. The amount of filtrated water decreases as the temperature of the water drops. Water leaks. • Did the water flow out of the internal water tank cover or from the inside of the product? Open the top cover to check where the water is leaking, close the water supply valve and contact the After-Service Center. • Water leaks when extracting ionized water. Close the water supply valve and contact the After-Service Center. The ionized water extraction stops automatically. Did the extraction time exceed 1 minute? • Ionized water extraction automatically stops after 1 minute to prevent overflowing by mistake. Is the Low level indicator turned on? There is insufficient water in the internal water tank. In this case, use the water within 1~2 hours. • A white substance settles at the bottom when ionized water is left over. There is insufficient water in the internal water tank. In this case, use the water within 1~2 hours. A white substance settles at the bottom when ionized water is left over. • Has the calcium ion in the water combined with the carbonic acid in the water? This is because of the separation of the calcium mineral in the water depending on the quality of the water. Although drinking the water is safe, if this symptom continues, ask your After-Sales Center how to protect the product. 27 Specification Product The Filtered Water Inonizer Product The Filtered Water Ionizer Model CPE-06ALW/B Standard power voltage 120 V~ 60 Hz Extraction type Separate filtrated/ion water extraction type, electronic extraction type Display part contents Cleaning indicator, check indicator, low water level indicator, cooling indicator, ion water level display, Ion and cold Ion water display, ion/ filtrated water extraction display, cooling mode selection display, and continuous extraction display Major functions An ion and cold ion water generation function and a water filtration function Water tank capacity Filtered water 6 L Cold water 3 L Total 9 L Electrolysis vessel Electrode type/quantity 5 white gold-plated titanium electrodes Electrode specification 62 mm X 110 mm (0.5 t) Dimension 350 mm(W) X 510 mm(D) X 511mm(H) Working Temperature 5 °C - 35 °C Production rate (on the basis of the amount of water of the internal water tank) 151 L/d (25 °C, 138 kPa) Working Pressure 138 kPa – 827 kPa Net Weight 24 kg 28 Others SPECIFICATION / WATER TER FLOW DIAGRAM WATER FLOW DIAGRAM CPE-06AL • An fine post-carbon filter may be installed instead of a inno-sense filter . For the precise specifications of your product, refer to the data plate on the product. .......... .................................. Water Filtration System Performance data Sheet brand: Wellion model: CPE-06Al Water Filtration System Performance data Sheet brand: Wellion model: CPE-06Al ThissystemhasbeentestedandcertifiedbytheWaterQualityAssociationaccordingtoNSF/ANSI42,and53forthereductionofthesubstanceslistedbelow.Theconcentrationoftheindicatedsubstancesinwaterenteringthesystemwasreducedtoaconcentrationlessthanorequaltothepermissiblelimitforwaterleavingthesystem,asspecifiedinNSF/ANSI42and53. Substance Max. Allowable Concentration (mg/L) Average Influent (mg/L) Average Effluent (mg/L) Minimum Percent Reduction (%) Average Percent Reduction (%) Aesthetic Chlorine INNOSENSE . 50% 2.07 0.56 54.53 72.8 FINE POST CARBON . 50% 1.96 0.53 55.0 72.8 VOC* INNOSENSE . 95% reduction 0.327 0.0052 96.20 98.4 FINE POST CARBON . 95% reduction 0.317 0.005 96.2 98.5 While testing was performed under laboratory conditions, actual performance may vary. General Operating information: Rated Capacity INNOSENSE FILTER 251 gallons (for VOC) 6,103 gallons (for Aesthetic Chlorine) FINE POST-CARBON FILTER 280 gallons (for VOC) 1,179 gallons (for Aesthetic Chlorine) Min-Max operating pressure: 20 ~ 120 psi (1.4 ~ 8.4 kgf/cm2) Min-Max feed water temperature: 41 ~ 95 .F (5 ~ 35 .C) Rated Service Flow 0.07 GPM (for VOC) 0.5 GPM (for Aesthetic Chlorine) Electrical Requirements: 120 Vac / 60Hz • Do not use with water ...
Эта инструкция также подходит к моделям:Диспенсеры - CPE-06ALB (10.44 mb)
Диспенсеры - CPE-06AL (10.44 mb)