Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
Belshaw cannot pay for shipping damage, because the freight company has accepted the machine from Belshaw in good condition, and is responsible for its safe delivery. For your protection, inspect the machine to see that no parts are bent, scratched, or otherwise damaged. If any damage has occurred in shipping, file a freight claim with the shipping company immediately. EQUIPMENT RECORD Please provide the information below when you correspond with us about your machine. Purchased by _____________________________________________________________________ Installed by ______________________________________________________________________ Date of Installation ________________________________________________________________ Model number ___________________________________________________________________ Serial number 0103 MN-1316EN Belshaw Bros., Inc. 1750 22nd Avenue South Seattle, WA 98144-4590 Phone: (206) 322-5474 .. Fax: (206) 322-5425 Toll Free: (800) 578-2547 Email: service@belshaw.com • Contents 1 Installation 1 2 Operation 5 Melting and Filling 5 Filtering 7 3 Cleaning 10 4 Troubleshooting 12 5 Parts List 15 EZ18-2000 Shortening Melter Assembly (120V) 16 EZ18-2001 Shortening Melter Assembly (240V) 18 EZ24-2000 Shortening Melter Assembly (120V) 20 EZ24-2001 Shortening Melter Assembly (240V) 22 EZ34-2000 Shortening Melter Assembly (120V) 24 EZ34-2001 Shortening Melter Assembly (240V) 26 EZ24/34-1000 Heater Head Assembly 28 6 Appendix 30 Wiring Diagram (EZ18-4002) - 120V, 50/60 Hz, 1 Ph Insert Wiring Diagram (EZ18-4003) - 208/240V, 50/60 Hz, 1 Ph Insert Figures 1-1. Front View. 1 1-2. Side View. 2 1-3. Top View, Heater Head. 2 1-4 Heater Head. 3 1-5 Elements & Kettle. 3 2-1. Packing Solid Shortening in the Kettle. 5 2-2. Cube Melter. 5 2-3. Installing the Cube Melter. 5 2-4. When to Add a Cube of Shortening. 6 2-4A. When to Add a Cube of Shortening. EZ-34 Only. 6 2-5. Positioning the Filter Frame for Melting. 6 2-6. When to Drain the Fryer. 7 2-6A. When to Drain the Fryer EZ-34 Only. 7 2-7. Positioning the Filter Assembly for Filtering. 7 2-8. Rinsing Hose. 8 3-1. Removing the Heater Head. 10 5-1. EZ18-2000 Shortening Melter Assembly (120V) 17 5-2. EZ18-2001 Shortening Melter Assembly (240V) 19 5-3. EZ24-2000 Shortening Melter Assembly (120V) 21 5-4. EZ24-2001 Shortening Melter Assembly (240V) 23 5-5. EZ34-2000 Shortening Melter Assembly (120V) 25 5-6. EZ34-2001 Shortening Melter Assembly (240V) 27 5-7 EZ24/34-1000 Heater Head Assembly 29 Preface The EZ Melt, Fill and Filter models EZ18, EZ24, and EZ34 are designed to be used with Belshaw fryers. It performs four functions: .. It melts shortening .. It holds shortening .. It supplies shortening to the fryer kettle .. It filters used shortening for re-use It is not designed to perform any other functions. The EZ Melt, Fill and Filter uses electrical elements to melt shortening. The EZ Melt moves around on casters. It is meant to be used on the floor. The operator of the EZ Melt is expected to behave safely and to read this manual and follow its instructions and warnings. Study the instructions and warnings in this manual carefully. A thorough understanding of how to install, maintain, and safely operate the EZ Melt, Fill and Filter will prevent production delays and injuries. To use the EZ Melt safely, heed the following warnings and all other warnings that appear in this manual: .. Make sure all hose connections are tight. If you do not, you may be sprayed with hot shortening. This could result in serious burns. .. Make sure no water gets into the shortening. Water causes hot shortening to spatter, which could cause serious burns. .. Make sure the EZ Melt kettle has enough room in it before draining shortening from the fryer. If you do not, shortening may overflow the kettle and get on the floor, possibly causing slips, falls, injury, burns, or even death. .. Make sure the nozzle of the supply hose is securely mounted on the side of the fryer before turning on the pump. If you do not, hot shortening could spray you, resulting in serious burns. Also, shortening could get on the floor, possibly causing slips, falls, injury, burns, or even death. .. Make sure that the system and the shortening are cool before attempting any adjustments or repairs. If you do not, you may be burned. .. Be careful never to get shortening, water, or other materials on the floor. If anything does get spilled on the floor, mop it up immediately. If you do not, someone could slip or fall, be burned or injured, or even die. .. To avoid damaging the EZ Melt, never use force to assemble, disassemble, operate, clean, or maintain it. .. To avoid electrocution, make sure that the power cord is not frayed or cracked and that it does not pass through any water or shortening. .. Make sure that the power cord is routed so that no one will trip over it. 1 Installation To help familiarize you with the major parts of your EZ Melt model EZ18, EZ24, or EZ34, please study the p...
Эта инструкция также подходит к моделям:Диспенсеры - EZ24 (1.35 mb)
Диспенсеры - EZ34 (1.35 mb)