Оценок - 5, средний балл: 4
(
)
)
|
Фрагмент инструкции
* When the power indicator is blinking on the display panel, the VCR is in the child lock mode. Daewoo Video Cassette Recorder User’s Guide 3 Daewoo Video Cassette Recorder User’s Guide Daewoo Video Cassette Recorder User’s Guide 4 Overview of the equipment,continued Overview of the equipment,continued Remote control 1 POWER Press to turn your VCR on or off. 2 0-9 Press to select channels or to make certain selections when using the menu system. 3 100 Press in combination with the 0-9 buttons to select channels greater than 100. 4 P/S Press to pause video tape playback for temporarily still picture. Each press of the button advances the picture one frame. 5 PLAY Press to play a video cassette. 6 REW Press to rewind a video cassette. 7 STOP Press to stop tape movement. 8 REC/OTR Press to record the program currently airing on the channel. Press multiple times to process one-touch-recording (OTR)time options. 9 SPEED Press to select tape recording speed (SP, or EP) 10 MENU Press to display the main menu. 11 CLEAR Press to delete previous selections. 12 INDEX + / - (Up / Down) In stop mode, Press to displays Index Search. 1 3 2 4 5 6 7 8 9 10 11 12 23 22 21 20 19 18 14 15 17 16 13 4 • Objects between the remote control and VCR will block the path of the remote control beam. • Dark walls, direct sunshine or very bright light will reduce the remote sensor’s sensitivity. • The remote control will not work correctly if you press several buttons at the same time. Back panel 1 VIDEO IN/OUT Attach the VCR’s video input/output at these terminals. 2 AUDIO IN/OUT Attach the VCR’s audio input/output at these terminals. 3 Antenna terminal Attach an antenna or cable system at this terminal. 4 RF OUT Use this terminal to connect to a VHF/UHF antenna or to your television RF input. 1 2 3 4 Over view of continue d 13 EJECT Press to eject a video cassette compartment. 14 CH/TRACKING (Up / Down) Press to change the channel (channels memory only) or to adjust the tracking. 15 SLOW (Up / Down) Press to allow slow-motion playback. 16 INPUT Press to select between the VCR tuner and the Audio/Video Input jacks. (auxiliary). 17 FF Press to fast forward a video cassette. 18 CM SKIP Press during playback mode to skip commercials or program segments. 19 TV/VCR Press to select the TV or VCR tuner. 20 PROGRAM Press to go directly "TIMER RECORDINGS" in MENU. 21 DISPLAY Press to display the tape counter, clock and status mode on the TV screen. 22 CHILD LOCK Press to disable VCR usage or to protect set timer recordings, the unit can be locked so that the buttons on the VCR or remote control don't work. 23 ATR Press to remove any streaks from the picture automatically. Daewoo Video Cassette Recorder User’s Guide Overview of continued 4 • Do not mix different types of batteries, or mix an old and a new battery. • Remove and replace weak batteries. Weak batteries can leak and damage your controller. Dispose of batteries properly; never throw them into a fire. Installing the remote batteries 1 Open the battery compartment remote control. 2 Install two AAA size batteries as shown. Make sure the “+” and “–” terminals are oriented correctly. – + – 3 Replace the cover. Using the remote control Hold the remote control within an angle range of about 30° from either side of the remote sensor. The remote control range is about 23 feet (7m) from the VCR. Point the front of the remote control directly at the front of the VCR. Daewoo Video Cassette Recorder User’s Guide Daewoo Video Cassette Recorder User’s Guide 8 Connecting your VCR You must connect your VCR to an external antenna or cable system. Next you will connect the VCR to the television. Follow the directions below to make these connections. You will normally only make one of the connections shown below, not all of them. Connecting an antenna to the VCR • If your antenna ends in a single coaxial lead, press or screw the cable onto the ANT. IN terminal on the back of your VCR. • If your antenna ends in a pair of 300 ohm twin leads, use a 300-ohm/75-ohm adapter (Not Supplied). Place the leads underneath the screws on the adapter, tighten the screws, then press the adapter onto the VCR ANT. IN terminal. Antennas with two sets of leads You may have two sets of leads from your antenna system. • If your antenna system has both a coaxial lead and twin 300-ohm leads, purchase a combiner (available at electronics stores). Press or screw the coaxial lead onto the combiner; place the twin leads underneath the screws on the combiner and tighten the screws. Press the cable from the combiner onto the ANT. IN terminal on the back of your VCR. VCR ANT.IN VCR ANT.IN 7 Daewoo Video Cassette Recorder User’s Guide Overview of the equipment,continued Accessories Carefully remove the VCR from the carton. Check that the VCR has not been damaged. The following accessories are included. 1 Wireless Remote Control NOTE : Required 2 ‘AAA’ batteries. 2 Coaxial cable for connecting the VCR to your TV’s VHF terminal. To get a ...