Оценок - 2, средний балл: 4.5
(
)
)
|
Фото и характеристики Sony ICD-ST25 |
К этому устройству также есть другие инструкции:
Фрагмент инструкции
During playback and recording, the menu items to be displayed are limited. Follow the procedures below to display the menu and change the settings: © Turn the jog lever toward MENU. The menu mode will be displayed. 2 Press the jog lever up or down (^W/^M) to select the menu item for which you want to change setting. ® Press the jog lever (■•►). The setting mode of the selected menu item will be displayed. ® Press the jog lever up or down (^W/^M) to select the setting that you want to set, and then press the jog lever (■•►). The setting will be changed. ® Turn the jog lever toward MENU to exit the menu mode. The window will return to normal display. Note If you do not press any keys for one minute, the menu mode is automatically cancelled and the window will return to normal display. Continued 53GB Other Functions Changing the Settings — MENU (continued) Menu items Settings (*: Initial setting) Stop/Play/Rec** MODE Displays the window to set the recording mode: ST*: You can record with stereo sound. SP: You can record with better sound (monaural sound). LP: You can record for longer time (monaural sound). OK/-/- SENS Displays the window to set the microphone sensitivity. H* (high): To record at meetings or in a quiet and/or spacious place. L (low): To record dictation or in a noisy place. OK/-/OK DISP Displays the window to change the display mode (COUNT*). See page 27. OK/OK/OK VOR Displays the window to set the VOR (Voice Operated Recording) function. ON: The VOR function is activated. Recording starts when the unit detects sound and stops when no sound is heard, eliminating recording from soundless period. OFF*: The VOR function is disabled. Normal recording operation is selected. OK/-/OK **Displays whether you can change the setting in each operation mode (Stop: stop mode/Play: playback mode/Rec: recording mode): “OK" shows the setting can be changed and “-" shows the setting cannot be changed. 54GB Menu items Settings (*: Initial setting) Stop/Play/Rec** DPC Displays the window to set the playback speed (ON/OFF*). See page 31. OK/OK/- EASY-S Displays the window to set the easy search function. ON: You can go back for approx. 3 seconds by pressing the jog lever down (M ), or advance for OK/-/- approx. 10 seconds by pressing the jog lever up (^W). OFF*: You can go back or forward the messages by pressing the jog lever down or up (^M /^W). CONT Displays the window to set the continuous play. ON: You can play back all messages in a folder continuously. OFF*: Playback stops at the end of each OK/OK/- message. REC-OP Displays the window to set the adding recording mode (ON/OFF*). See page 52. OK/-/- SET DATE Displays the window to set the clock OK/-/- (04Y1M1D*). See page 9. BEEP ON*: A beep will sound to indicate that operation has been accepted. OFF: No beep sound will be heard except for the alarm. OK/-/- LED Displays the window to turn on or off the OPR indicator during operation (ON*/OFF). See page 50. OK/-/- ALARM Displays the window to set the alarm OK/-/- (ON/OFF*). See page 46. 55GB Other Functions Using the "Digital Voice Editor Software By connecting the IC recorder to your computer with the supplied USB cable, you can use the “Digital Voice Editor" software to do the following: • Saving the IC recorder messages on your computer's hard disk. • Transferring the PC messages back to the IC recorder. • Playing or editing the messages on your computer. • Sending a voice e-mail message using MAPI e-mail software. • Transcribing your IC recorder message using Dragon NaturallySpeaking® speech-recognition software (not supplied). For the details, see the supplied “Digital Voice Editor 2" software operating instructions. Note If you have already used the older version of the “Digital Voice Editor" software, install the current version in the supplied CD-ROM. The version number of the supplied “Digital Voice Editor" software is indicated on the CD-ROM. Connection Connecting cable (supplied) 56GB System requirements Your computer and system software must meet the following minimum requirements. • IBM PC/AT or compatible - CPU: 266MHz Pentium® II processor or higher - RAM: 64MB or more - Hard disk space: 70MB or more depending on the size and number of sound files you store - CD-ROM drive - USB port - Sound board: Sound Blaster 16 compatible - Display: High color (16 bits) or more and 800 x 480 dots or more • OS: Microsoft® Windows® XP Professional/XP Home Edition/2000 Professional/Millennium Edition/98 Second Edition/98 standard installation (You cannot use this software with Windows® 95 or Windows® NT.) Notes • You cannot use the software with a Macintosh machine. • A handmade computer, a computer whose operating system is installed or upgraded by the user, or a computer with multi-boot operating environment are not supported. 57GB Other Functions BAdditional Information Precautions On power • Operate the unit only on...