Оценок - , средний балл:
(
)
)
Производитель: Olympus
Размер: 4.58 mb
Название файла:
Язык инструкции:
Документ загружается, подождите пожалуйста
 |
Документ загружается, подождите пожалуйста
Фрагмент инструкции
• Please refer to P.44, P.45 for details on menu settings. 2 Press the + or . button to select a preset number. • Press the 9 button to show the [Day] and the [Time] set for the preset number the cursor is pointing at. 60 EN Menu setting method [Time] setting: 1 Press the 9 or 0 button to select "Hour"and "Minute" in the [Start Time] and "Hour" and "Minute" in the [Stop Time]. 2 Press the + or – button to set. 3 Press the OK button to exit [Time] selection. [Rec Mode] setting: Regardless of the regular [Rec Mode]( P.47), timer recording will start in a set recording mode. 1 Press the + or – button to select a recording mode. 2 Press the OK or 9 button. 3 Press the + or – button to select a recording rate. 4 Press the OK button to exit Recording mode selection. [Folder] setting: 1 Press the + or – button to select the destination to save to (Memory) (For DM-550) 2 Press the OK or 9 button to move to the [Folder] setting. 3 Press the + or – button to select the destination to save to (Folder). 4 Press the OK button to exit [Folder] setting selection. [Mic Sense] setting: Regardless of the recorder’s microphone sensitivity setting (..P.47), timer recording will start at a set microphone sensitivity. 1 Press the + or – button to select from [High], [Middle], and [Low]. 2 Press the OK button to exit [Mic Sense] selection. Completing the setting. 1 Pressing + or . button to select [Finish]. 2 Press the OK button to complete the setup screen. 6 Programmed settings will be applied and the screen will return to the preset number selection menu. If the [On/Off] setting is set to [On], will appear on the display. a When setting to [On] a 7 When setting other preset numbers, repeat Steps 2 through 6. When the 9 button is pressed in the Select in Advance Menu, the settings selected can be confirmed. Press the F2 or STOP 4 button to complete the setting. • The will appear on the display. 4 Menu setting method Notes • If the recorder is in use at the preset start time, the timer recording will start directly after stopping the recorder. • Even if the power if turned o& or the recorder is put on Hold, timer recording will start at a speci"ed time. • If three timer recordings have the same starting times, [Preset 1] has the highest priority and [Preset 3] has the lowest. • If the starting time for timer recording and alarm playback (.. P.64) is set for the same time, timer recording will have priority. • If the batteries run out while recording based on the timer setting, the recorder will stop recording. Check the battery power before starting the timer recording. EN 61 Menu setting method • If the [Time & Date] is not correct, timer recording cannot be set at the speci"ed time, so make sure the [Time & Date] is correct before setting timer recording. If it is not correct, reset [Time & Date] ( P.20). • The recorder will record in the built-in memory [Folder A] when the microSD card is selected as the recording destination and the microSD card is not inserted during Timer Recording. Setting the Recording Scene [Rec Scene] The recording setting can be selected from the [Dictation], [Conference], [Lecture] templates to suit the recording scene or situation. You can also save a recording setting of your choice. +. button 90 button OK button STOP button F2 button Menu setting method 1 Select [Rec Scene] from the menu in [Rec Menu]. • Please refer to P.44, P.45 for details on menu settings. 62 2 Press the + or . button to select the item to set. 3 Press the OK or 9button to move to Settings. When [Scene Select] is selected: 1 Press the + or – button to select the recording scene you want to set. 2 Press the OK button to complete the selection. • To confirm the respective recording scene settings, press the + or – button in the [Scene Select] screen to select the item you want to confirm, then press the 9 button to confirm in the setting confirmation screen. To end the setting confirmation screen, press the F1 button and the display will return to the [Scene Select] screen. • When the recorder is stopped, pressing and holding the F2 button will return the screen to [Scene Select]. 4 EN Menu setting method When [Scene Save] is selected: Besides the [Rec Scene] templates found in the recorder, you can also save the menu settings of a recording you have set to your choice. 1 Press the + or – button to select the [User Setting] you want to save. 2 Press the OK button to complete the settings. 4 4 Press the F2 or STOP 4 button to complete the setting. Menu setting method Template for Setting a Recording scene In [Scene Select], you can select a recording scene that is most suitable for the recording scene or situation from three templates. The recording settings for the respective recording scenes are as follows. Record Setting [Mic Sense] [Rec Mode] [Rec Level] [Zoom Mic] [Low Cut Filter] [VCVA] [Standby] Recording Scene Off Middle ST XQ Auto Off Off Off On Dictation Conference Lecture Low Middle High HQ ST XQ ST XQ Auto Auto Auto O...
Эта инструкция также подходит к моделям:Диктофоны - DM-450 (4.58 mb)