Оценок - 2, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
Folders can appear with their user assigned folder name (if used). FS-100 Portable DTE Recorder FS-100 Functions Control Screen CONTROL -LOCAL SYNCRO SLAVE AV/C TAPELESS The Control screen provides the capability of enabling the FS-100 to operate in five different control modes during record and playback. • Local Local control mode ignores record triggers from the camcorder and is controlled exclusively from the FS-100 front panel or the optional wired remote control unit. Transport Keys Keeper (cycles throughReels) 0-9 REEL numbers • Transport keys have the same functions as on the FS-100. STOP 1-001 COUNTER 00:00:00:00: DISK 1 000 min R1 SYNC DISP LOCK FS-100 Portable DTE Recorder FS-100 Functions key to cycle through the available Reels. For example, if the current Reel selection is 3. pressing Keeper changes the selection to Reel 4. To purchase the wired remote control, p/n ACSS-0019-01, forthe FS-100, visit Focus Enhancements web site at •Use the Keeper • Syncro Slave Use this mode when the camcorder does not have FS-100 compatible external control or the tapeless trigger functionality. In Syncro Slave control mode, the FS-100 mimics the camcorder’s operations by monitoring the camcorder’s tape record state. • AV/C Do Not Use AV/C control in Record Mode Use AV/C in playback mode and other situations where the FS100 is controlled by an external FireWire device such as a NLE system that is not supported by Direct To Edit Technology. In these cases, the FS-100 can be used in a manner similar to a camcorder to capture footage to the NLE. • Tapeless Control The Tapeless Control mode allows the FS-100 to be controlled from a camcorder, if it features a FS-100 compatible Tapelesscontrol setting separate from the tape transport. It isrecommended to use this control mode with the companion camcorder, the Panasonic AG-HVX200. Camcorder Requirements for Tapeless Control Mode Tapeless Control mode will not work unless it is supported by the camcorder and the camcorder is placed in this external control mode. Please refer to Configuring AG-HVX200 and Recording on page 37. FS-100 Portable DTE Recorder FS-100 Functions FS-100 Portable DTE Recorder 96 LCD Display Symbols and Text The table below shows the different symbols and states displayed on the top line of the LCD when used with different FS-100 control, record, play and stop modes: PLAY/REC MODE FS-100 LCD Stop STOP Pause ll PLAY Play PLAY Rec (Pause) ll REC Normal Rec (Rec) REC PRE-REC Disk (Stop) P STOP PRE-REC Disk (Standby) P REC PRE-REC Cach (Stop) C STOP PRE-REC Cach (Standby) C REC Loop Record (Stop) L STOP Loop Record (Standby) L REC Loop Record (Rec) L REC Snap (Stop) STOP Snap (Standby) ll SNAP Snap (Rec) ll SNAP Time Lapse (Stop) STOP Time Lapse (Pause) ll T REC Time Lapse (Rec) T REC AV/C* (Stop) A STOP AV/C* (Rec Pause) ll A .. REC AV/C* (Rec) A .. REC AV/C* (Play Pause) ll A PLAY AV/C* (Play) A ALL Syncro Slave (Pause) ll Y .. REC Syncro Slave (Rec) Y .. REC FS-100 Portable DTE Recorder LCD Display Symbols and Text PLAY/REC MODE FS-100 LCD Tapeless (Pause) ll E .. REC Tapeless (Rec) E .. REC * AV/C is only for use when the FS-100 is connected to a computer system. FS-100 Portable DTE Recorder Using the FS-100 with a Computer Once video clips are recorded to the FS-100 it is possible to use those clips in most computer based DV/HD NLE systems. This section contains the following: Initial Setup 100 Mounting the FS-100 in Windows 101 FS-100 and FAT 32 104 Using Avid OMF Clips 105 Dismounting the FS-100 (Windows) 108 Mounting the FS-100 (Macintosh) 109 Dismounting the FS-100 (Macintosh) 110 In the past, to get footage into an NLE system, it was necessary to capture / digitize the footage using a video capture card. For most DV and some P2 compatible NLE systems, FS-100 DTE functionality eliminates the capture stage. All that is necessary is the moving of the video files from the FS-100 to a computer. Recording for Unsupported NLE If a desired NLE is not supported by Focus Enhancements DTE, it is necessary to use the AV/C control to capture the video footage for editing. For more details refer to Control Screen on page 94. FS-100 Portable DTE Recorder Using the FS-100 with a Computer To move video files from the FS-100 to a computer: • Connect the FS-100’s Computer I/O 1394 port directly to a computer with an active OHCI compliant IEEE-1394 FireWire port and the necessary FireWire disk drive drivers. For More Information Go to the FOCUS Enhancements' website (for more compatibility information. • To use the FS-100 HDD Bypass mode, refer below for more information. The FS-100 is compatible with any computer system that can read FAT 32 volumes, such as Windows 98SE/ME/2000/XP and Mac OS9/OS10. Initial Setup 1. Connect the FS-100 through its COMPUTER I/O 1394 port to the computer system using a standard 6-pin to 6-pin FireWire cable. 2. Enter HDD mode and enable DD Drive. This step is required before moun...
Эта инструкция также подходит к моделям:Диктофоны - DVCPRO/DV (3.85 mb)
Диктофоны - DVCPRO50 (3.85 mb)
Диктофоны - FOCUS FireStore FS-100 (3.85 mb)