Оценок - 4, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
3. Replace the cover. Notes: • If the RECORD/BATTERY indicator lights dimly or does not light at all during use, replace the batteries. • If you do not plan to use the Micro-41 for several days, or if you plan to use 8 14-1169.fm Page 9 Monday, April 26, 1999 4:03 PM only AC or vehicle battery power, remove the batteries. Using AC Power You can power the Micro-41 from an AC outlet, using an AC adapter (not supplied), available at your local RadioShack store. Cautions: ! You must use a Class 2 power source that supplies 3V volts DC and delivers at least 300 mA. Its center tip must be set to positive and its plug must fit the Micro-41's DC 3V jack. The recommended adapter meets these specifications. Using an adapter that does not meet these specifications could damage the Micro-41 or the adapter. • Always plug the AC adapter in to the Micro-41 before you plug it into the AC outlet, and unplug the adapter from the AC outlet before you unplug it from the Micro-41. 9 14-1169.fm Page 10 Monday, April 26, 1999 4:03 PM Follow these steps to power the Micro-41 from standard AC power. RadioSnack IC DC3V 1. Set the AC adapter's voltage switch to 3V. 2. Insert the 3.4 mm outer diameter/1.3 mm inner diameter barrel plug into the AC adapter's cord to read TIP+. Note: Inserting the barrel plug into the Micro-41's DC 3V jack disconnects the internal batteries. 3. Plug the adapter’s other end into a standard AC outlet. Using Vehicle Battery Power You can power the Micro-41 from a vehicle's battery using a DC adapter (not supplied), available at your local RadioShack store. 10 14-1169.fm Page 11 Monday, April 26, 1999 4:03 PM Cautions: ! You must use a power source that supplies 3 volts DC and delivers at least 300 mA. Its center tip must be set to positive and its plug must fit the Micro-41's DC 3V jack. The recommended adapter meets these specifications. Using an adapter that does not meet these specifications could damage the Micro-41 or the adapter. • Always plug the DC adapter into the Micro-41 before you plug it into the cigarette-lighter socket, and unplug the adapter from the cigarette-lighter socket before you unplug it from the Micro-41. Follow these steps to power the Micro-41 from your vehicle's battery. MIC DC3V 11 14-1169.fm Page 12 Monday, April 26, 1999 4:03 PM 1. Set the DC adapter's voltage switch to 3V. 2. Attach the 3.4 mm outer diameter/1.3 mm inner diameter barrel plug with the tip set to positive (+). 3. Insert the barrel plug into the Micro41' s DC 3V jack. This disconnects any internal batteries. 4. Plug the other end of the DC adapter into the vehicle's cigarette-lighter socket. CONNECTING AN EARPHONE You can use an optional mono earphone with a 1/8-inch (3.5mm) plug to listen to a tape privately. Notes: • You can also use an earphone to monitor what the recorder picks up through the internal or an external microphone. • Your local RadioShack store carries a wide selection of earphones. 12 14-1169.fm Page 13 Monday, April 26, 1999 4:03 PM Insert the earphone's plug into the recorder's EAR jack. The internal speaker automatically disconnects. Earphone Jack Listening Safely To protect your hearing, follow these guidelines when you use an earphone. • Set the volume to the lowest setting before you begin listening. After you begin listening, adjust the volume to a comfortable listening level. • Do not listen at extremely high volume levels. Extended high-volume listening can lead to permanent hearing loss. 13 14-1169.fm Page 14 Monday, April 26, 1999 4:03 PM • Once you set the volume, do not increase it. Over time, your ears adapt to the volume level, so a volume level that does not cause discomfort might still damage your hearing. Traffic Safety • Do not wear an earphone while operating a motor vehicle or riding a bicycle. This can create a traffic hazard and could be illegal in some areas. • Even though some earphones let you hear outside sounds when listening at normal volume levels, they still can present a traffic hazard. 14 14-1169.fm Page 15 Monday, April 26, 1999 4:03 PM CONNECTING AN EXTERNAL MICROPHONE You can use an optional microphone with a 1/8-inch (3.5mm) plug to extend the recording range. Your local RadioShack store carries a wide selection of microphones. Insert the microphone’s plug into the recorder’s MIC jack. The built-in microphone automatically disconnects. 15 14-1169.fm Page 16 Monday, April 26, 1999 4:03 PM OPERATION LOADING A MICROCASSETTE TAPE Note: We recommend MC-60 microcassette tapes for up to 2 hours of recording/ playback time, or MC-90 microcassette tapes for up to 3 hours of recording/playback time. We do not recommend long- playing microcassette tapes such as MC120s because they are extremely thin and can easily tangle in the playback mechanism. Follow these steps to load a microcassette tape. 1. Use a pencil to turn the microcassette's hub and remove any tape slack. Avoid touching the tape. 2. Press STOP/EJECT. The cassette compartment door opens. 16 14-1169.fm Page...
Эта инструкция также подходит к моделям:Диктофоны - 05A99 (830.72 kb)
Диктофоны - Micro-41 (830.72 kb)