Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
Press the key to select Store and then press the key. The changes are applied, and the screen returns to Operation mode. If you select Abort and press the key, the changes are discarded, and the screen returns to Operation mode. Press the ESC key to return to the Basic= screen. 7.4 Setting the RJC Function on Channels Set to TC Input Explanation RJC Sets the RJC mode. Internal: Uses the RJC function on the recorder. External: Uses an external RJC function. If external is selected, set the compensation voltage. Volt Sets the compensation voltage when using an external RJC function. The compensation voltage can be set in the range of –20000 .V to 20000 .V. 7 Setup Operations for Changing/Adding Functions (Basic Setting Mode) 7-7 7.5 Changing the Channel Recording Color (Dot Model) This section explains the details of changing the trend recording color on the dot model. Basic Setting mode cannot be entered when recording is in progress or when computation is in progress on models with the computation function (/M1 option). Procedure Changing the Settings 1. Hold down the MENU key for 3 seconds to enter Setting mode. 2. Hold down the and keys simultaneously for 3 seconds to enter Basic Setting mode. 3. Press the key or SHIFT + key to select Color and then press the key. 4. Set each item and press the key. Use the key or SHIFT + key to select values. For the procedure on how to enter values or characters, see section 4.2. If you press the ESC key in the middle of the operation, the settings entered up to then are cancelled, and the display returns to a higher level menu. 5. When the Setting complete screen appears, do either of the following: Press the key to set other channels. If you are done, press the ESC key. ESC/? 01 Channel Color Setting complete Basic=Color Channel=01 Color=Purple Select the channel. Select the recording color. The new setting takes effect. Applying the Changes and Returning to Operation Mode Press the key or SHIFT + key to select End and then press the key. Press the key to select Store and then press the key. The changes are applied, and the screen returns to Operation mode. If you select Abort and press the key, the changes are discarded, and the screen returns to Operation mode. Press the ESC key to return to the Basic= screen. Explanation Color Sets the recording color of measurement channels. By default, the recording colors are set as follows: Channel01: Purple Channel 02: Red Channel 03: Green Channel 04: Blue Channel 05: Brown Channel 06: Black 7.6 Recording by Compensating for the Pen Offset along the Time Axis (Pen Model) This section explains the details of setting the compensation for the pen offset along the time axis (pen model). Basic Setting mode cannot be entered when recording is in progress or when computation is in progress on models with the computation function (/M1 option). Procedure Changing the Settings 1. Hold down the MENU key for 3 seconds to enter Setting mode. 2. Hold down the and keys simultaneously for 3 seconds to enter Basic Setting mode. 3. Press the key or SHIFT + key to select POC and then press the key. 4. Set each item and press the key. Use the key or SHIFT + key to select values. For the procedure on how to enter values or characters, see section 4.2. If you press the ESC key in the middle of the operation, the settings entered up to then are cancelled, and the display returns to a higher level menu. 5. When the Setting complete screen appears, do either of the following: To correct the setting, press the key. If you are done, press the ESC key. 7 ESC/? POC Setting complete POC=Off Basic=POC Select On to record by compensating for the pen offset along the time axis. The new setting takes effect. Applying the Changes and Returning to Operation Mode Press the key or SHIFT + key to select End and then press the key. Press the key to select Store and then press the key. The changes are applied, and the screen returns to Operation mode. If you select Abort and press the key, the changes are discarded, and the screen returns to Operation mode. Press the ESC key to return to the Basic= screen. Explanation POC (Pen Offset Compensation) On: Enables pen offset compensation. Off: Disables pen offset compensation. Note When pen offset compensation is enabled, all pens are aligned with the reference pen (pen that is furthest to the back: pen 2 on the 2-pen model, pen 3 on the 3-pen model, and pen 4 on the 4-pen model) for recording. When recording is started, only the reference pen moves until the offset is compensated. This is not a malfunction. When pen offset compensation is enabled, an asterisk is printed by the time on the periodic printout. Setup Operations for Changing/Adding Functions (Basic Setting Mode) 7-9 7.7 Turning Printouts ON/OFF. This section explains the details of turning ON/OFF the printouts of various items. Basic Setting mode cannot be entered when recording is in progress or when computation is in progress on models with the computation...