Оценок - 6, средний балл: 4.2
(
)
)
|
Фрагмент инструкции
6. Press RECORD within 3 seconds to start recording appendix. 7. Press STOP to stop recording. 13 RP5030 EN (B ver) 15/11/06 10:28 AM Page 19 Cut You can erase unwanted parts from your recording. 1. Select folder. 2. Select file. 3. Start playback of the file with the unwanted part. 4. Press ERASE to mark the start of the unwanted part, SP ONE AM A “CUT-S” shows on display. 5. Press ERASE to mark the endof the unwanted part, “CUT-E” shows on display. SP ONE AM A 6. Press ERASE again to confirm cutting (or press STOP to cancel) 7. “WAIT” will show on the display. 8. After the memory rearrangement completed, the unit will go to STOP mode. Format (Caution! All data inside the memory will be erased) You can format the internal memory when needed. (e.g. compatability problem, etc.) The procedures are as follow: 1. Turn on the unit. 2. Press ERASE, “DELETE” will flash on the display. 3. Press and hold REC for 3 seconds, “FORMAT” will flash on the display. 4. Press and hold ERASE, the completed percentage will show on the display, formatting is in process. 5. After the formatting is completed, the remain time of the selected memory will show on the display. SP DICT A SP DICT A SP DICT A SP DICT A REMAIN SP DICT A EN Tip: Cutting, inserting new segments and adding appendix will only update the recorded time length, without changing recording time and date. 14 RP5030 EN (B ver) 15/11/06 10:28 AM Page 20 Connecting to the Computer EN Install the USB Driver (Windows 98SE Only) For Windows 98SE system, you need to install a USB driver before your computer can recognize your player. 1. Download the driver for your model from the following links: Model RP5030: Downloads.html?ProductID=RP5 030 Model RP5035: Downloads.html?ProductID=RP5 035 2. Open the downloaded file (RP503x_Win98Drv.exe) and follow the on-screen instruction. 3. After installation is completed, reboot your computer. Plugged into the computer You can transfer files with computer via USB connection. 1. Use the USB cable supplied to connect the unit to the computer. 2. “PC-LINK” will show on the display. 3. The unit may appear to be a removable drive in your computer. Tip: • Data transfer is possible even if no batteries are installed in the unit. • On some operating system, a message warning about "Removing a USB device without stopping it…" might appear, you can press OK to safely ignore it. Disconnecting from the computer Unplug the USB cable after you have copied files to or from the unit. 15 RP5030 EN (B ver) 15/11/06 10:28 AM Page 21 Using your unit as a file storage device The unit can function as a detachable data storage. You can take along your favorite images and documents wherever you go. Simple cut-andpaste or drag-and-drop files to or from it via USB connection, the unit will appear as a removable disk in Windows Explorer. Transfer Files via Windows Explorer (Drag and Drop) Your player is associated with a drive letter. From Windows Explorer, highlight all the files/folders you want to transfer to your Player and drag them to the folder named “MUSIC” in the drive. Your files can be found in this folder in the Player once it is disconnected from the computer. EN 16 RP5030 EN (B ver) 15/11/06 10:28 AM Page 22 Troubleshooting Tips EN Unit doesn’t turn on • Check that batteries are properly inserted and not exhausted. • Make sure battery compartment door is properly closed. • Make sure LOCK function is not activated. Display keeps flashing when unit is off •You may not have set the time. Refer to section on Time Setting. Cannot record • Make sure LOCK function is not activated. • Make sure memory is not full. •You have recorded 99 files in one folder. Try record in a new folder. Cannot show recording date and time during playback •You may have not set the date and time before recording. Refer to section ‘Time Setting’. No sound from speaker during playback • Make sure volume is not set to 0. • Headphones should not be connected. Cannot edit • Make sure LOCK function is not activated. Cannot activate the unit after pressing on keys • There may be software problems. Remove the batteries to reset the unit. Recordable time becomes shorter •You may have set the recording quality to ‘High Quality’, refer to section ‘Setting Recording Quality’. Cannot perform playback • Make sure you have selected folder with recorded messages. • Make sure LOCK function is not activated. Cannot erase recorded file(s) • Make sure you follow each step under section “Erasing Selected File” carefully. Cannot stop recording when AVR ON • If AVR ON sensitivity is too high (e.g. 8 - 10), recording may not be stopped in noisy environment. Cannot keep the saved setting • If the batteries are removed, saved settings may be removed. 17 RP5030 EN (B ver) 15/11/06 10:28 AM Page 23 U.S. limited warranty What your warranty covers: • Defects in materials or workmanship. For how long after your purchase: • One year from...
Эта инструкция также подходит к моделям:Диктофоны - 5629403B (246.78 kb)
Диктофоны - 5629403B (246.78 kb)