Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
inch input port on the front of the CopyWriter Live. Left/Right RCA Input 2 is available as an input source on the front panel. The Headphone jack can be used to monitor the audio either during recording or playback. It is recommended that you set the headphone volume at a comfortable level before changing the input volumes during recording. Headphone Jack Left/Right RCA Input 2 7 Microboards CopyWriter Live Rack Mount Installation To mount the rack mount brackets on your CopyWriter Live system, please follow these steps: 1) If you system is turned on, turn off power and unplug the power cord from the back of the system. 2) Turn the system over and remove the four feet from the bottom of the CopyWriter Live. 3) With the system upside down, mount the brackets in place. The L shape of each bracket will wrap around the side and bottom of the CopyWriter Live. 4) Secure the brackets on the bottom with two screws for each bracket. 5) Flip the CopyWriter Live system over and secure the side of the bracket with a screw in the upper corner on each side. 6) Each bracket should now have three screws installed, two on the bottom and one on the side. 7) The CopyWriter Live is now ready to be placed in your rack. System Operation NO NO After powering on the system, the following screen is displayed: DISC
Диктофоны - CWL-6200 (111.35 kb)
Диктофоны - CWL-6200 (111.35 kb)