Войти:
Оценок - 5, средний балл: 3.8 ( )

Инструкция по эксплуатации Mountain Buggy, модель SS150

Производитель: Mountain Buggy
Размер: 1.01 mb
Название файла:
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


WARNING: Never place child in stroller with their head forward and feet rearward unless the child is in an approved infant car seat and it is mounted correctly to the stroller using the specially designed car seat adapter bar. See step 9 in the instruction manual. WARNING: Avoid serious injury from falling or sliding out. Always use seat belt. WARNING: Never leave child unattended. WARNING: Never use this stroller with roller skates or in-line skates. WARNING: Never allow stroller to be used as a toy or allow children to give rides to others. WARNING: Never use stroller if it becomes damaged. WARNING: Always be aware of traffic around you when walking. WARNING: Always engage brakes when you stop or when you let go of handle. WARNING: Do not put or hang things on the canopy or handle. Accessories or parcels placed in or on the stroller may cause it to become unstable. WARNING: Maximum weight for objects in bottom basket is 5 lbs. or 2.2 kg. Excessive weight may cause a hazardous, unstable condition. WARNING: To avoid burns, never put hot liquids in the parent or child tray. To prevent tipping over do not place more than 2 lbs. or 1 kg on either parent or child tray. WARNING: Child may slip into leg openings and strangle. Never use in a reclined carriage position unless waist and shoulder straps have been readjusted. WARNING: Care must be taken when folding and unfolding the product to prevent finger entrapment. 1 IMPORTANT We appreciate your purchase of one of our many fine products. We are sure that you will be satisfied with your selection. We regret that although great care and effort have been taken, occasionally problems may occur. PLEASE DO NOT RETURN PRODUCT TO THE STORE. To ensure prompt and correct handling of problems, or to answer questions, please contact us at either our Toll-Free Customer Service number or E-mail us at our address listed below. Service will be quicker if you have your model number (found on the product and box) along with this instruction sheet ready when calling. If you have any questions concerning the safe use of this product, please contact us at 1-800-242-6110 and speak to our Customer Service Representative or E-mail us at info@instep.net or visit us at Tires are shipped deflated, DO NOT OVERINFLATE. Due to their size, PLEASE INFLATE SLOWLY WITH SHORT BURSTS OF AIR to 20-25 PSI maximum. 25 PSI will provide a comfortable ride for your child. Model SS100 and SS150 Saturn Stroller Assembly Instructions Parts List Description Qty. Description Qty. Frame Assembly Fender Fender screws #4 x 16mm Front Wheel Assembly Dual 8" Rear Wheels 10" 1 1 4 1 2 Parent Console Child tray Infant car seat adapter bar 1 1 1 Stroller Assembly and Use Instructions Step 1. Unfold Stroller Grasp frame as shown and open until side latches engage (Figure A1). To fold stroller: Pull the one-hand fold handle toward the stroller handle, stroller will automatically begin to fold (Figure A2). You can also fold the stroller by pulling the side latches towards the stroller handle (Figure A3). Continue folding, pushing frame together and hook the storage latch (Figure A4). Side Latches A1 Side Latches A2 One-Hand Fold Lever Front Wheel Post 2 Step 2. Rear Wheel Assembly Turn stroller onto its side. Grasp rear wheel in one hand, slide wheel’s axle into hole in rear of frame (Figure B1). Check to see that the wheel is properly inserted by pulling on the wheel firmly, the wheel should not come off if fully inserted/locked. Repeat for other side. To release wheel push up on axle release lever while pulling off wheel (Figure B2). To engage rear brakes: Step lightly on the side brake levers or rear brake bar to engage brakes. To disengage, lift up on brake levers or bar (Figure B3). A3 A4 B2 B3 B1 Side Latches Storage Latch Rear Axle Axle Release Lever Rear Brake Bar Rear Frame Axle Release Lever Brake Levers A3 A4 B2 B3 B1 Side Latches Storage Latch Rear Axle Axle Release Lever Rear Brake Bar Rear Frame Axle Release Lever Brake Levers 3 Step 3. Front Wheel Assembly C1 Turn stroller upright onto its rear wheels, then tip stroller back so the handlebar is down on the ground and the front is up. Slide the front wheel assembly onto the front wheel post, push until the wheel assembly locks into place (Figure C1). Check to see that the wheel assembly is properly inserted by pulling on the wheel firmly. To remove wheel push on release tab and pull off wheel (Figure C2). To lock the front wheel from turning: Push down on the front wheel’s lock lever to keep the front wheel from turning. To unlock, lift up on lever (Figure C3). Step 4. Front Fender Assembly While stroller is still upright on its rear wheels, align the fender’s tabs with the holes in the front frame and press on. Insert the #4 – 16mm screws into the hole and tighten with a Phillips screwdriver, repeat for the other 3 holes (Figure D). WARNING: To avoid burns, never put hot liquids in the parent or child tray. To prevent tipping over do not p...

Эта инструкция также подходит к моделям:
Детские коляски - SS100 (1.01 mb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории