Войти:
Оценок - 0, средний балл: 4 ( )

Инструкция по эксплуатации Harbor Freight Tools, модель 02969

Производитель: Harbor Freight Tools
Размер: 1.68 mb
Название файла: ba0a4ae1-f99d-4b46-a66d-27551a6cae98.pdf
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


When servicing, use only identical replacement parts. Use of any other parts will void the warranty. Only use accessories intended for use with this product. 11. Do not operate if under the influence of alcohol or drugs. Read warning labels on prescriptions to determine if your judgment or reflexes are impaired while taking drugs. If there is any doubt, do not operate the product. 12. Maintenance. For your safety, service and maintenance should be performed regularly by a qualified technician. Special Warnings for this Product 1. Before use, be sure your Walker/Stroller is fully opened, the Seat is down completely, and the folding bar beneath the Seat is in the locked position. 2. Check that both Handles are at equal heights. If one is lower than the other, adjust accordingly. Apply gentle pressure to the Handles to test the stability of the Walker/Stroller before use. 3. Test Brakes thoroughly before use. The brake bar on the wheels will prevent the wheels from rolling, when the Brake is in the locked position (see Page 5, Hand Brake Operation). If the Wheels turn while Brakes are locked, have the Brakes adjusted by an authorized technician. Under no circumstances should you use this product if the Brakes do not lock properly. 4. Always put Brakes in the locked position before sitting on the Seat. Do not sit on the Seat unless you are on even, level ground. 5. Check tires periodically, and replace when worn. 6. This product is not a cart or a wheel chair. Do not use it to push or carry people or objects. Do not load more than 25 Lbs. in the Basket. SKU 02969 For technical questions, please call 1-800-444-3353. Page 3 Warning:The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. Unpacking When unpacking, check to make sure all parts listed on Page 6 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual. Assembly All parts numbered and listed refer to those in the Assembly Diagram and Parts List on Pages 5-6. 1. Attach the Backrest Bar [7] to the Front Frame [10] by depressing the two Brass Buttons [8] on the sides of the Backrest Bar, and sliding the Bar into the slots in the Back Frame as shown in Fig. A, right. 2. To attach the two Handles, first slide one of the Handrail Rods [3] into the Front Frame [10] as shown in the Assembly Diagram. Find a comfortable height for the Handle, then line up the holes in the Handrail Rod with one of the holes in the Front Frame. Secure in position using an M6 Screw [42], and Knob [5]. Repeat to attach the other Handle, making sure that both Handles are the same height. 3. Your Walker/Stroller is easily collapsible, when you want to take it in the car, on an airplane, or for other storage purposes. Simply remove the Basket [49] and the Backrest Bar, and pull up on the Folding Strap [51] as demonstrated at right in Fig. B.To unfold the Walker/Stroller, place all four of the Wheels [22] on the ground and push down on the Handles until the Folding Side Braces [38] are parallel to the ground and the Walker/Stroller is locked in the open position. REV 04j; 07dSKU 02969 For technical questions, please call 1-800-444-3353. Page 4 Backrest Bar [7] Fig. A, Attaching the Backrest Bar Fig. B, Collapsing the Walker/Stroller Hand Brake Operation 1. To slow down or stop temporarily, squeeze the Handgrip [1 & 52] and the Brake Loop [1A] together firmly. 2. To lock Wheels in position, push down on the Brake Loops until you hear a ‘click’ sound. See Fig. C. 3. To unlock Wheels, pull up on the Brake Loops as shown in Fig. D. Fig. C, Wheels in locked position Fig. D, Wheels unlocked Assembly Drawing REV 04h; 04j SKU 02969 For technical questions, please call 1-800-444-3353. Page 5 Parts List ITEM DESCRIPTION QTY 1 Left Handgrip w/thumb rest 1 1A Brake Loop 2 2 Control Plate 2 3 Handrail Rod 2 4 Braking Thread 2 5 Knob 2 6 Low Density Foam 1 7 Backrest Bar 1 8 8.15 Brass Button 2 9 1.6 Spring 2 10 Front Frame 1 11 Plastic Washers 10 12 M6 Defended Loose Nut 8 13 Spring Mat 2 14 Wheel Fork Bearing Cap 2 15 60012 Bearing 4 16 Wheel Fork 2 17 Screws 2 18 M12 Defended Loose Nut 2 19 M8 Screws 2 20 Washers 6 21 6082 Bearing 8 22 5” Bearing Wheel 4 23 M8 Defended Loose Nut 6 24 Screw Cap 8 25 M8 Screws 2 ITEM DESCRIPTION QTY 26 Screws (Left & Right) 1 27 Brake Piece 1 28 Control Piece (Left) 1 29 Control Piece (Right) 1 30 Fixed Ring 2 31 M5 Defended Loose Nut 4 32 M5 Crossed Screw 4 33 Screws 2 34 Link Rod 1 35 L-Shape Joining 2 36 37 Crossed Screws 4 37 Arc Screws 6 38 Folding Side Braces 2 39 Slide Plug 2 40 40 Crossed Screws 2 41 Brass Tube 2 42 M6 Screws 2 43 7/8” Collar 2 44 Back Frame 1 45 Plastic Tie 2 46 3/16” Screws 4 47 Clip 2 48 Padded Seat 1 49 Basket 1 50 PVC Bag 1 5...


Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории