Оценок - 4, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
On the outside, these locomotives feature numerous prototypical details and expert decoration. Inside the bodies, each locomotive is equipped with TrainMaster Command Control and the RailSounds sound system. This set is ready for duty on your layout. Features of each locomotive • TrainMaster Command Control equipped—able to run in the TrainMaster Command Control environment or in the conventional environment with only a standard transformer • RailSounds sound system with CrewTalk communication and TowerCom announcements • Odyssey System for speed control • Magne-Traction track gripping system • Directional lighting including operating LED headlights • Operating marker lights • ElectroCouplers • Dual powerful maintenance-free motors with momentum flywheels • Four traction tires • Fan-driven smoke units • Realistic, pulsing Mars lights • Operating radiator fans • Lighted number boards • Lighted cab interior • Minimum curve: O-31 The following Lionel marks may be used throughout this instruction manual and are protected under law. All rights reserved. Lionel®, TrainMaster®, Odyssey®, RailSounds®, CrewTalk™, TowerCom™, DynaChuff™, StationSounds™, Pullmor®, ElectroCoupler™, Magne-Traction®, CAB-1® Remote Controller, PowerMaster®, Lionel ZW®, ZW®, PowerHouse®, TMCC®, Lionelville™, Lockon®, Wireless Tether™ The name FasTrack® is used with permission from Pitsco, Inc. 2 Table of contents Quick Start Transformer operations 4 TrainMaster Command Control operations 4 Conventional transformer operations Conventional operations 5 Operating your locomotive set in the conventional environment 6 Locking your powered locomotive into a single direction 7 Coupling your locomotive in the conventional environment 8 RailSounds sound system operations RailSounds sound system operations 9 Installing the battery 10 Using the RailSounds sound system in the conventional environment 11 Installing a Lionel Sound Activation Button for conventional operation 12 Using the RailSounds sound system in the TrainMaster Command Control environment 13 Odyssey System operations Odyssey System operations 14 Activating the Odyssey System in the conventional environment 14 Turning off the Odyssey System in the conventional environment 15 Odyssey System Command Control operation 16 TrainMaster Command Control operations TrainMaster Command Control operations 17 Operating your locomotive set in the Command Control environment 17 CAB-1 Remote Controller commands 18 CAB-1 Remote Controller numeric keypad commands 19 Tuning your locomotive’s performance 20-21 Assigning new ID#’s to your locomotives 22 Building a lash-up 23 Reprogramming your locomotives to restore features 24 Maintaining and servicing your locomotive Adding fluid to your locomotives’ smoke generators 25 Lubricating your locomotive set 26 Replacing your locomotive set’s LEDs and lamps 27 Replacing the traction tires 27 Limited Warranty/Lionel Service 28 3 Quick Start Transformer operations 1. Slide the Odyssey System switch to the NO ODY position to operate without speed control. To operate your locomotive with speed control, slide the Odyssey System switch to the ODY position and refer to pages 15 and 16. 2. Place your locomotive on Lionel or Lionel-compatible O-31 or larger track. 3. Power your locomotive at 8-18 volts with your alternating current (AC) transformer. Note! Do not power your locomotive with a direct-current (DC) transformer. Damage to sensitive electronic components may occur. 4. Wait three to eight seconds as your locomotive determines whether it is in a conventional environment or a TrainMaster Command Control environment. 5. Move ‘em out! Press the DIRECTION button on your controller, then throttle up. TrainMaster Command Control operations T T o operate your locomotive in the Command Control environment, you need a Command Base (available separately, 6-12911) and a CAB-1 Remote Controller (available separately, 6-12868). 1. Turn off track power and plug-in the Command Base. 2. Place your locomotive on Lionel or Lionel-compatible O-31 or larger track. 3. Increase track voltage to full power (19 volts AC). Note! Do not power your locomotive with a direct-current (DC) transformer. Damage to sensitive electronic components may occur. 4. Press ENG and 1 to address your locomotive with your CAB-1 Remote Controller. 5. Throttle up and move ‘em out. 4 Conventional transformer operations Conventional operations Y Y our locomotive set is capable of operating in the conventional environment with nothing more than a standard Lionel alternating-current (AC) transformer. In the conventional environment, your locomotives cycle through a repeating pattern of operations: forward, neutral, reverse, neutral, and so on. To advance to the next operation, press the DIRECTION button on your transformer. Alternately, you could use the throttle to briefly turn off track power so that the locomotives advance to the next operation when power is restored. Once you cycle the locomotives into forw...