Оценок - 4, средний балл: 3.3
(
)
)
|
Фрагмент инструкции
Battery Compartment Door Battery Tips: • Do not mix old and new batteries. • Do not mix different types of batteries: alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium). • Remove the batteries during long periods of non-use. Always remove exhausted batteries from the toy. Battery leakage and corrosion can damage this toy. Dispose of batteries safely. • Do not dispose of batteries in a fire. The batteries may explode or leak. • Never short circuit the battery terminals. • Non-rechargeable batteries are not to be recharged. • Only batteries of the same or equivalent type as recommended in the "Battery Replacement" instructions are to be used. • If removable rechargeable batteries are used, they are only to be charged under adult supervision. • Rechargeable batteries are to be removed from the toy before they are charged. • If you use a battery charger, it should be examined regularly for damage to the cord, plug, enclosure and other parts. Do not use a damaged battery charger until it has been properly repaired. 4 Assembly 1 Terminal Base Terminal 1 Terminal Base Terminal • Position the terminal base on a flat surface. Insert and "snap" the tabs on the bottom of the terminal into the slots in the terminal base as shown. Press firmly on the building to make sure all five tabs have snapped in place. • Pull up on the terminal to be sure it is secure. 2 Bridge Base Ramp with fuel pumpRamp • Place the bridge base on a flat surface. Insert and "snap" the tabs on the ramp into the slots in the bridge base as shown. • Insert and "snap" the tabs on the ramp with fuel pump into the slots in the bridge base as shown. 5 Assembly 3 Bridge 3 Bridge • Insert and "snap" the tabs on the ends of the bridge into the slots in the ramps, as shown. 4 Ramp Assembly Straight Track • Insert and "snap" the tabs on the end of each ramp into the slots in the straight track as shown. Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A. ©2002 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. Printed in China 77831a-0920 6 Assembly 7 5 • Insert and "snap" the peg on the bottom of the radar dish into one of the two large holes on the roof of the terminal. • Insert and "snap" the peg on the bottom of the binocular viewer into the other large hole on the roof of the terminal. • The windsock can be inserted and removed from any of the smaller holes on the roof of the terminal. • The umbrella can be inserted and removed from the hole in the table on the terminal base. 6 Terminal Base Groove • To attach the terminal to the track, place the ridge on the bottom of terminal base into the groove in the track. Hint: Lift the terminal base to separate from the track for easier storage. Table Binocular Viewer Radar Dish Windsock Umbrella Terminal Track Label Application Proper label application will help to keep the labels looking their best! • Wash your hands before applying the labels. • Make sure the areas where the labels will be applied are clean and dry. Wipe this product with a clean, soft, dry cloth to remove any dust or oils. • For best results, do not attempt to apply a label more than once. • Apply the labels as shown in the illustrations. 8 Terminal Back View 19 8 14 6 18 3 4 17 16 17 17 18 218 10 11 13 9 15 17 712 1 5 18 Airport Fun with Lights and Sound Effects! X Button Indicator Light Power Switch Airport Fun with Lights and Sound Effects! X Button Indicator Light Power Switch • Locate the power switch on the bottom of the toy. • Slide the switch to the on position. The lights flash and you’ll hear a musical "fanfare". The indicator light shows the toy is ready to recognize the vehicles when rolled. • If your child does not actively play with this toy for a few minutes, the toy will play the same fanfare and go to sleep. The indicator light goes out. Sound effects and lights will not work. • To "wake up" the toy, press the "X" button on the top of the airport building. • When your child is finished playing with the toy, slide the on/off switch to the off position. Luggage Storage • Place luggage in the groove on the back bumper of the taxi or under the jet plane. 9 Roll ‘n Recognize Roll any vehicle within 3 feet of the airport. The airport recognizes the vehicle and responds with a sound effect and lights. If Vehicle Sound Effects Are Not Playing 10 Turn the baggage carousel to hear a tune. Hint: Teach your child how to roll the vehicles at a consistent speed and in a straight line to activate the sound effects. Rotate the helicopter propeller for lights and sound effects. Raise and lower the toll gate for flashing lights and phrases. Check to see if: • Vehicles are being rolled or helicopter propeller is being rotated outside the zone of about three feet from the airport terminal. • Vehicle is not being rolled at least six inches. • Your child is playing with the toy in a noisy room with clicking noises in the background. This toy recognizes the clicking sounds...