Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
The Heart Beat feature is available for use in Virtual COM Port Mode and Paired Connection Mode. This is not available when using a UDP application. Chapter 1 Manual Documentation Number: ESR90x-0508m B&B Electronics Mfg Co Inc – 707 Dayton Rd - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – Introduction Serial Server Quick Start Guide For descriptive purposes this Quick Start Guide considers a typical configuration consisting of a PC connected via an Ethernet LAN to an ESR902 Serial Server connected to the RS-232 port of a serial device. Hardware Setup Ethernet LAN Ethernet cable cable RS-232 cable ESR902 PC Serial Device Figure 2. Typical Hardware Setup Step 1: Connect the Serial Server to the network using a standard network cable. Step 2: Connect the Serial Server to the RS-232 port on the serial device. N NNo oot tte ee: :: If the serial device is configured as a DCE use a straight-through serial cable. If the serial device is configured as a DTE use a crossover (null modem) cable. Step 3: Set the Run/Console DIP switch to the Run position. Step 4: Apply power to the Serial Server. Software Installation Using the CD included with the Serial Server, install the VLINX Manager software on the configuring computer. Manual Documentation Number ESR90x-0508m Chapter 1 B&B Electronics Mfg Co Inc – 707 Dayton Rd -Ottawa IL 61350 -Ph 815-433-5100 -Fax 815-433-5104 – B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – Introduction Serial Server Configuration Step 1: Open the ESP Manager software. It will automatically search for any reachable (ESP or ESR) Serial Servers. A list of all Serial Servers connected to the LAN will appear in the Serial Server List window. Step 2: Double click the desired Serial Server port on the list to bring up the Server Properties configuration screen. Figure 3. The Server Properties Window Step 3: Change the Server Properties as required. • Enable DHCP to allow the Serial Server to generate its own IP address OR • Obtain appropriate static IP, Netmask and Gateway addresses from your Network Administrator (recommended) • Set the Serial Port Mode property to RS-232 to match the serial device connected to the Serial Server. • Set Baud Rate, Data/Parity/Stop, and Flow Control to match the configuration of the serial device connected to the Serial Server port Step 4: When the parameters have been set, click Update. Following the prompts in the dialogue boxes, Restart the Serial Server and Search all reachable servers again. Chapter 1 Manual Documentation Number: ESR90x-0508m B&B Electronics Mfg Co Inc – 707 Dayton Rd - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – Introduction Step 5: Re-enter Server Properties to verify the changes have taken effect, or to view/change the configuration of other ports. Each port must be configured separately. Install Virtual COM Ports on PC Step 1: From the Windows Start menu, run the Install Virtual COM Ports utility included with the VLINX software, Step 2: Search for all servers on the network Step 3: Select a port and map it to an unused COM port (e.g. Port 15). Configure it for TCP protocol and the appropriate IP address (determined in the last section). Figure 4. Configuring the Virtual COM Port Check Communications Step 1: From the Windows Start menu, run HyperTerminal Step 2: Configure HyperTerminal to connect using the COM port configured in the last section (e.g. Port 15). Step 3: Set Baud Rate, Data/Parity/Stop, and Flow Control to match the configuration of the serial device connected to the Serial Server serial port. Step 4: Communications with the serial device should now be operational. Manual Documentation Number ESR90x-0508m Chapter 1 B&B Electronics Mfg Co Inc – 707 Dayton Rd - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – Introduction Chapter 1 Manual Documentation Number: ESR90x-0508m B&B Electronics Mfg Co Inc – 707 Dayton Rd - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – Making the Hardware Connections C CCh hha aap ppt tte eer rr 2 22: :: M MMA AAK KKI IIN NNG GG T TTH HHE EE H HHA AAR RRD DDW WWA AAR RRE EE C CCO OON NNN NNE EEC CCT TTI IIO OON NNS SS Package Checklist ESR90x Serial Servers are shipped with the following items included: • Serial Server Module • This Operation Manual • CD-ROM disc wit...
Эта инструкция также подходит к моделям:Детские игрушки - ESR902 (1.22 mb)
Детские игрушки - ESR904 (1.22 mb)