Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
2. While holding pole, rotate basketball system forward until wheels engage with ground. 3. Move basketball system to desired location. 4. Carefully rotate basketball system upright. 5. Reattach ground restraint and check system for stability. HEIGHT ADJUSTMENT TO ADJUST BACKBOARD: 1. TO RAISE BACKBOARD: Slowly push up on the rim broom handle or wooden dowel, 3/4 - 7/8 (19mm - 22mm) diameter as shown to engage locking mechanism at desired height. 2. TO LOWER BACKBOARD: Push lever up to unlock and carefully lower backboard to lowest position. with 54 5 01/05 P/N 211022 Get to know the basic parts of your basketball system..... FRONT SUPPORT STRUT BACKBOARD RIM BASE POLE 6 P/N 211022 01/05 PARTS LIST - See Hardware Identifier ItemQty.Part No. Description ItemQty.Part No. Description 1 1 206657 Tank, (Black) 2 1 200628 Wheel Axle 3 2 226401 Wheel, 4“ (Black) 4 1 90021701 Top Pole Section 5 1 904840 Middle Pole Section 6 1 900136 Bottom Pole Section 7 1 202820 Rod, 3/8 O.D. x 4-3/4 Long 8 1 202822 Eyebolt, 3/8-16 x 2-1/2 Long 9 1 203063 Nylon Insert Lock Nut, 3/8-16 10 2 906206 Tank Strut 11 1 201625 Bolt, Hex Head, 5/16-18 x 3-3/4 Long 12 6 203218 Washer, Flat, 3/8 I.D. 13 1 203220 Nylon Insert Lock Nut, 5/16-18 14 1 201568 Anchor, T-Strap 15 2 205528 Bolt, Hex Flange, 5/16-18 x 1 Long 16 8 203100 Nut, Hex Flange, 5/16-18 17 4 201651 Spacer .500 I.D. x .25 Long 18 2 206303 Washer 1/4 Flat 19 1 200627 Wheel Bracket 20 12 201219 Clip, Net Holder 211 Rim 22 1 206219 Cap, Pole Top 3” 23 1 203124 Stake, Tie Down 24 2 203617 Plug Cap 25 1 201257 Label, Height Adjustment and Moving 261 Net 27 1 201160 Pawl Lever 28 1 201159 Ratchet 29 2 900846 Backboard Bracket 30 1 206305 Clevis Pin 1/4 x 2-9/32 Large 31 4 203113 Bolt, Hex Flange , 5/16-18 x 2 1/2 Long 32 2 203038 Bolt, Carriage, 5/16-18 x 2-3/4 Long 33 2 201129 Spacer .402 I.D. x.500 O.D. x 1.8 Long 34 1 240017 Bolt, Hex 1/4-20 x 2-1/4 Long 35 1 206360 Bolt, Hex 3/8-16 x 2.65 Long 36 1 203493 Lock Nut 1/4-20 37 1 201124 Lock Nut 3/8-16 38 1 203470 Washer Flat, Slam Jam 39 5 206340 Nut 1/2-13 40 1 203795 Nut, Special, Slam Jam 41 1 201125 Return Ratchet Spring 42 4 201642 Spacer .530 I.D. x.63 O.D. x .5 Long 43 5 206304 Bolt 1/2-13 x 6-5/16 Long 44 4 908002 Elevator Tubes 45 1 203472 Spring, Black, Slam Jam 46 1 203365 Rim Spacer, Plastic 47 1 203796 T-Bolt, 3/8-16 x 5” Large 48 1 200318 Bracket, Reinforcement, Slam Jam 49 1 202587 Spacer .Plastic, 1" Long NOTE: Hardware kit is designed for more than one style of basketball system. Not all hardware will be used. WARRANTY CARD: Please remember to complete your product registration form either on-line at: or mail-in the enclosed postcard. WARNING: IF YOUR SYSTEM IS EQUIPPED WITH AN ACRYLIC BACKBOARD, EXAMINE BACKBOARD FOR ANY DAMAGE THAT MAY HAVE OCCURRED DURING SHIPMENT. CRACKS IN THE BACKBOARD COULD RESULT IN SUDDEN BREAKAGE. IF BACKBOARD IS DAMAGED IN ANY WAY PRIOR TO OR AFTER ASSEMBLY, CALL TOLL-FREE NUMBER FOR FREE REPLACEMENT: U.S. 1-800-558-5234; CANADA: 1-800-284-8339; * YOU MAY HAVE EXTRA PARTS WITH THIS MODEL. 7 01/05 P/N 211022 HARDWARE IDENTIFIER (BOLTS) Item #8 (1) Item #11 (1) Item #15 (2) Item #32 (2) Item #31 (4) Item #34 (1) Item #35 (1) Item #43 (5) Item #47 (1) HARDWARE IDENTIFIER (NUTS & WASHERS) * You may have extra parts with this model. Item #36 (1) Item #37 (1) Item #39 (5) Item #13 (1) Item #16 (8) Item #9 (1) Item #12 (6) Item #18 (2) Item #40 (1) Item #38 (1) 8 P/N 211022 01/05 HARDWARE IDENTIFIER (STEEL SPACERS & RODS) Item #7 (1) Item #33 (2) HARDWARE IDENTIFIER (PLASTIC SPACERS & CLIPS) Item #20 (12)Item #42 (4) Item #49 (1) Item #17 (4) HARDWARE IDENTIFIER (OTHER) Item #46 (1) Item #48 (1) Item #45 (1) Item #30 (1) 9 01/05 P/N 211022 SECTION A: ASSEMBLE THE BASE This is what your system will look like when you’ve finished this section: TOOLS REQUIRED FOR THIS SECTION HARDWARE USED IN THIS SECTION (not actual size) (2) 1/2”, (2) 9/16" AND (2) 3/4" Wrenches 9/16”1/2” AND/OR (2) Socket Wrenches and Sockets Item #8 Item #9 Item #7 Item #11 Item #15 Item #13 Item #16 Item #12 Item #18 Item #17 Item #34 Item #35 Item #39 Item #33 Item #43 Item #42 Item #30 3/4” Item #49 10 P/N 211022 01/05 1. Remove contents from tank (1). 1 2. Correctly identify each pole section and mark indicated distance from ends with tape as shown. 4 5 6 BOTTOM POLE 43” MIDDLE POLE 43” TOP POLE 31” 11 01/05 P/N 211022 5 4 IMPORTANT! Center alignment slot of middle pole section (5) in a lower hole of top pole section (4) as shown. While maintaining alignment, bounce pole top (4) and middle section (5) together as shown until they no longer move toward taped reference mark. Upright assembly. 3. WOOD SCRAP (NOT SUPPLIED) POLE SECTIONS SHOULD HAVE A 3-1/2" (9 CM) MINIMUM OVERLAP. NOTE: 5 4 IMPORTANT! Center alignment slot of middle pole section (5) in a lower hole of top pole section (4) as shown. While maintaining alignment, bounce pole top (4) and middle section (...