Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
WARNING! IF YOUR SYSTEM IS EQUIPPED WITH AN ACRYLIC BACKBOARD, EXAMINE BACKBOARD FOR ANY DAMAGE THAT MAY HAVE OCCURRED DURING SHIPMENT. CRACKS IN THE BACKBOARD COULD RESULT IN SUDDEN BREAKAGE. IF BACKBOARD IS DAMAGED IN ANY WAY PRIOR TO OR AFTER ASSEMBLY, CALL TOLL-FREE NUMBER: U.S. 1-800-558-5234; CANADA: 1-800-284-8339; ID# M6809011 12/06 4 Get to know the basic parts of your basketball system... TOP POLE MIDDLE POLE BOTTOM POLE STRUTS ELEVATOR ASSEMBLY BACKBOARD BASE WHEEL CARRIAGE ASSEMBLY FRONT BACK RIM PARTS LIST - See Hardware Identifier Item Qty. Part No. Description Item Qty. Part No. Description 1 1 600053 Tank 28 1 908355 Cover Plate, Rim 2 2 906410 Strut, Pole to Base 29 3 205678 Bolt, Hex Head, 1/2-13 x 7 Long 3 1 800344 Screw Jack Assembly 30 8 201651 Spacer, Plastic, .530 I.D. x .25 Long 4 1 FR908402 Top Pole Section 31 7 206340 Lock Nut, Hex 1/2-13 5 1 FR908401 Middle Pole Section 32 2 908412 Elevator Tube, Lower - Long 6 1 FR908403 Bottom Pole Section 33 1 568090 Label, Height Adjustment and Moving 7 2 800332 Wheel Bracket FR568090 Label, French 8 2 600056 Wheel, 3.5” 34 1 Rim 9 1 108306 Rod, Axle 35 2 908411 Elevator Tube, Upper - Short 10 2 203099 Nut, Ny-lock, 5/16-18 36 2 202587 Spacer, .530 I.D. x 1” Long 11 1 600062 Cap, Cover, Height Indicator 37 1 203470 Washer, Flat, .625 I.D. x .1.5 O.D. 12 1 202662 Bolt, Hex Head, 5/16-18 x 4-1/2 Long 38 1 600052 Cap, Pole Top 13 2 206938 Pushnut, 7/16 Shaft Diameter 39 2 204558 Screw, 1/4 x .375 Long 14 8 203100 Hex Flange Nut 5/16-18 40 2 205528 Bolt, Hex Flange, 5/16-18 x 1 Long 15 1 908415 Bracket, Pole Mount 41 1 600049 Cap, Base 16 2 204846 Carriage Bolt, 5/16-18 x 4.5 Long 42 1 206989 Reinforcement Bracket 17 1 600058 Cover, Upper Tube 43 1 Net 18 6 203153 Bolt, Hex Head, 5/16-18 x .75 Long 44 1 900033 Bracket, Slam Jam 19 1 108181 Plate, Pole Mounting 45 1 203796 Bolt, Tee, 3/8-16, 5” Long 20 1 201518 Bolt, Hex Head, 5/16-18 x 2.75 Long 46 1 200318 Bracket, Reinforcement, Slam Jam 21 1 700009 Handle, Elevator Assembly 47 1 203472 Spring, Rim 22 1 202528 Pin, Actuator Assembly 48 1 203795 Nut, Special, 3/8-16 23 4 205679 Bolt, Hex Head, 1/2-13 x 2 Long 49 2 205842 Washer, Flat, .344 I.D. x .1.5 O.D. 24 8* 203218 Washer, Flat, 5/16 25 26 2 4 203679 203104 Bolt, Hex Head, 3/8-16 x 2 Long Bolt, Hex Head, 5/16-18 x 2 Long * YOU MAY HAVE EXTRA PARTS WITH THIS MODEL. 27 1 908416 Plate NOTE Hardware kit is designed for more than one style of basketball system. Not all hardware will be used. 5 12/06 ID# M6809011 HARDWARE IDENTIFIER (BOLTS & SCREWS) #23 (4) #16 (2) #29 (3) #12 (1) #45 (1) #39 (2) #26 (4) #20 (1) #25 (2) #40 (2) #18 (6) HARDWARE IDENTIFIER (NUTS & WASHERS) #10 (2) * You may have extra parts with this model. #14 (8) #31 (7) #48 (1) #37 (1) #24 (8)* #49 (2) ID# M6809011 12/06 6 HARDWARE IDENTIFIER (PLASTIC SPACERS CAPS & CLIPS) #30 (8) #36 (2) #13 (4) HARDWARE IDENTIFIER (OTHER) #47 (1) #44 (1) #46 (1) 7 12/06 ID# M6809011 ID# M6809011 12/06 8 7 8 8 9 13 13 Complete wheel assembly as shown in Figure A. Secure wheel bracket (7) and wheel assembly (Fig. A.) to the tank (1) with a bolts (18) and washers (24). Repeat procedure for opposite wheel. 24 24 18 TO INSTALL SECOND PUSHNUT: • Assemble Pushnut, Wheels, Axle, And Wheel Bracket As Shown. • Support Pushnut/Axle From The End With A Block Of Wood To Install The Second Pushnut Onto The Axle. NOTE: Wood Block TOOLS REQUIRED FOR THIS SECTION SECTION A: ASSEMBLE THE BASE This is what your system will look like when you’ve finished this section. 9/16”, 1/2” 1/2” 9/16” (2) Wrenches AND/OR (2) Socket Wrenches and Sockets Extension 1. Sawhorse or support table 18 Fig. A. 7 1 18 24 18 24 Correctly identify each pole section. Poles have an identification sticker that will be used as a reference point in the next step. 2. 4 6 BOTTOMTOP 5MIDDLE IDENTIFICATION STICKER IDENTIFICATION STICKER 2. 4 6 BOTTOMTOP 5MIDDLE IDENTIFICATION STICKER IDENTIFICATION STICKER Bounce middle pole section (5) into top section (4) using a wood scrap as shown until the top pole no longer moves toward the pole identification sticker on the middle pole.3. 5 4 Wood Scrap (not supplied) THE IDENTIFICATION STICKER IS LOCATED 5" FROM THE END OF THE POLE. WHEN PROPERLY POUNDED TOGETHER, THE POLE SECTIONS SHOULD HAVE A 4-1/2" MINIMUM OVERLAP, LEAVING 1/2" BETWEEN THE OVERLAPPING POLE AND THE IDENTIFICATION STICKER. CAUTION! IMPORTANT! NOTE ORIENTATION OF POLES. 9 12/06 ID# M6809011 ID# M6809011 12/06 10 4. 4 5 6 Bounce top and middle pole assembly (4 and 5) onto bottom pole section (6) using a wood scrap as shown. Bounce until the top and middle pole assembly no longer moves toward the pole identification mark on the bottom pole. Wood Scrap (not supplied) 5. Attach pole assembly to tank (1) as shown. Secure pole assembly to tank using bolts (25) and pole mounting plate (19) as shown. TWO CAPABLE ADULTS REQUIRED FOR THIS PROCEDURE. FAILURE TO FOLLOW THIS WARNING COULD RESULT IN SERIOUS INJURY AND/OR PR...